Jiacai Huang

Dr. Jiacai Huang


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 February 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XWXuyin Wang
Xuyin Wang
FGFangzheng Gao
Fangzheng Gao
JHJiacai Huang
Jiacai Huang
YXYuan Xue
Yuan Xue
To deal with the disadvantages of non-line-of-sight (NLOS) errors in ultra-wideband (UWB) and cumulative errors in LiDAR which impact positioning accuracy, a UWB/LiDAR tightly coupled positioning method is presented in this paper by the improved sparrow search algorithm (ISSA) optimized particle filter. By incorporating LiDAR measurements, this mehtod offers the distance estimation between the combined positioning system and the UWB base station, and eliminates the NLOS errors in the UWB measurement value. In addition, the ISSA is employed to eliminate the particle degradation phenomenon of particle filter and reduce the required number of particles, which significantly enhances the speed and real-time performance of the data fusion algorithm. Finally, the combined function of UWB/LiDAR is constructed to optimize the global position based on the graph optimization method. The experimental results demonstrate that the particle filter algorithm optimized by ISSA achieves comparable results while utilizing only 25% of the particles required by the original particle filter algorithm. Moreover, the proposed method improves the positioning accuracy by 69.16% and 59.63% compared with UWB and LiDAR alone, and improves the positioning accuracy by 55.71% compared with the fusion positioning using Extended Kalman Filter (EKF). These results highlight the effectiveness of the proposed method in achieving accurate positioning.

20 June 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
FGFangzheng Gao
Fangzheng Gao
TJTang Wen jun
Tang Wen jun
JHJiacai Huang
Jiacai Huang
HCHaiyang Chen
Haiyang Chen
Quadruped robots, an important class of unmanned aerial vehicles, have broad potential for applications in education, service, industry, military, and other fields. Their independent positioning plays a key role for completing assigned tasks in a complex environment. However, positioning based on global navigation satellite systems (GNSS) may result in GNSS jamming and quadruped robots not operating properly in environments sheltered by buildings. In this paper, a tightly coupled LiDAR vision inertial odometer (LVIO) is proposed to address the positioning inaccuracy of quadruped robots, which have poor mileage information obtained though legs and feet structures only. With this optimization method, the point cloud data obtained by 3D LiDAR, the image feature information obtained by binocular vision, and the IMU inertial data are combined to improve the precise indoor and outdoor positioning of a quadruped robot. This method reduces the errors caused by the uniform motion model in laser odometer as well as the image blur caused by rapid movements of the robot, which can lead to error-matching in a dynamic scene; at the same time, it alleviates the impact of drift on inertial measurements. Finally, the quadruped robot in the laboratory is used to build a physical platform for verification. The experimental results show that the designed LVIO effectively realizes the positioning of four groups of robots with high precision and strong robustness, both indoors or outdoors, which verify the feasibility and effectiveness of the proposed method.

2 September 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
RGRanran Geng
Ranran Geng
RGRanran Geng
Ranran Geng
YWYuqi Wang
Yuqi Wang
JHJiacai Huang
Jiacai Huang
LHLiu hanzhong
Liu hanzhong
This paper presents the vibration response analysis and optimal structural design of a microgripper driven by linear ultrasonic motors (LUMs) dedicated to improving end-point positioning accuracy. Based on structural vibration theory, a parametric vibration response model of the microgripper finger was established, and the relative sensitivities of the structural and material parameters that affect the vibration amplitude of the fingertip were calculated within the structural and material constraints. Then, according to the sensitivity calculation results, a multidimensional constrained nonlinear optimization model was constructed to suppress the vibration of the end-effector. The improved internal penalty function method combined with Newton iteration was adopted to obtain the optimal structural parameters. Finally, the vibration experimental results show that the vibration amplitude of the initial microgripper fingertip is 16.31 μm, and the value measured after optimization was 2.49 μm, exhibiting a reduction of 84.7%. Therefore, the proposed optimal design method can effectively restrain the vibration of the microgripper end-effector and improve manipulation stability.

13 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
YLYibo Li
Yibo Li
JHJiacai Huang
Jiacai Huang
FGFangzheng Gao
Fangzheng Gao
ZZZhiying Zhu
Zhiying Zhu
YHYufei Han
Yufei Han
DZDuo Zhang
Duo Zhang
The analytical model of a permanent magnet eddy current coupler (PMECC) is mainly used for evaluation of its characteristics and the initial optimization of design. Based on the equivalent magnetic circuit method, this paper carries out analytical modeling for four typical PMECCs composed of surface-mounted and interior permanent magnet, slotted and non-slotted conductor rotors, which provides a theoretical basis for the subsequent research in this paper. The basic electromagnetic characteristics of the PMECCs are investigated by the established analytical model. Simultaneously, the analytical results about permeance, flux density, torque and power are verified by FEA simulation. The analysis results show that the slotted CR will obtain a much higher power density, and the iron loss mainly exists in the CRs. In addition, the analytical and FEA results agree well, which proves the reliability of the proposed, nearly unified analytical model.

13 December 2024 in Machines
Verified
Journal Article
Open access
PDF file
XSXiaoxiao Sun
Xiaoxiao Sun
ZQZhihao Qian
Zhihao Qian
YXYaochen Xu
Yaochen Xu
JHJiacai Huang
Jiacai Huang
The China Bearing Reducer (CBR) is a single-stage cycloid reducer with a compact structure, primarily used in high-precision fields such as robotic joints and Computer Numerical Control (CNC) machine tool turntables, where strict requirements for transmission accuracy are necessary. Tooth modification and manufacturing errors in the cycloid gear are two important factors affecting the transmission accuracy of CBRs. In this paper, the transmission performance of the CBR is studied using a new tooth modification method that considers manufacturing errors. Firstly, the structure of the CBR is introduced, and a new method known as Variable Isometric Sectional Profile Modification (VISPM) is proposed. Secondly, the Tooth Contact Analysis (TCA) model is constructed using the VISPM method, and a method for reconstructing the tooth profile with cycloid tooth profile error based on B-spline curve fitting is proposed. The TCA is carried out with both VISPM and tooth profile error. The influence of the modification parameters on meshing characteristics, such as contact force, contact stress, contact deformation, and transmission error, is analyzed. Thirdly, the optimization of the modification parameters is conducted using Particle Swarm Optimization (PSO) to determine the optimal VISPM and isometric and offset modification (IOM) parameter values. The results indicate that the VSIPM method is superior to the IOM method in enhancing meshing characteristics. A physical prototype of the CBR25 is manufactured using the optimized VISPM and IOM, and the transmission error is tested on an experimental platform. The test results demonstrate that the ETCA method is corrected for cycloid drive analysis.

2 September 2026 in Actuators
Verified
Journal Article
Open access
PDF file
CSChengcheng Song
Chengcheng Song
XMXingyu Ma
Xingyu Ma
YLYuang Luo
Yuang Luo
CYChongsheng Yuan
Chongsheng Yuan
FGFangzheng Gao
Fangzheng Gao
JHJiacai Huang
Jiacai Huang
In this paper, an ultra-local model-based finite-time sliding mode control (ULM-FTSMC) method is developed for tracking quadrotor position and attitude in the presence of uncertainties and external disturbances. Based on an ultra-local model technique, the proposed ULM-FTSMC scheme consists of an adaptive neural network observer (ANNO) and a non-singular fast terminal sliding mode controller (NFTSMC). The ultra-local model is employed to approximate complex quadrotor dynamics, thereby reducing the complexity of controller design. The ANNO is designed to estimate the state variables required for subsequent control design and compensate for the lumped disturbances. Furthermore, an improved reaching law incorporating a variable exponent and multiple power terms is developed for the nonsingular fast terminal sliding surface, based on which an NFTSMC is constructed to achieve accurate trajectory tracking within finite time. The stability of the closed-loop system and the finite-time convergence of the tracking errors are rigorously established using Lyapunov theory. Finally, comparative numerical simulations with several existing controllers are conducted to demonstrate the effectiveness and superiority of the proposed method.