A series of micro hollow glass beads (HGB) filled castor oil-based polyurethane/epoxy resin graft interpenetrating polymer network (IPN) composites were prepared. The tensile and impact strengths, impact fractured surfaces, damping properties and thermal stability of the IPN composites were studied systematically in terms of composition. Results revealed that the addition of HGB into polyurethane/epoxy IPN can significantly improve not only the tensile strength but also the impact strength. The tensile strength was increased by 61% and at the same time the impact strength was increased by 25% when the HGB content was 1.5%. The damping properties were better than the composition of 0.5% or 2% HGB content when the HGB content was 1% or 1.5%. The thermal decomposition temperature was also slightly improved by the incorporation of HGB. It is suggested that the HGB reinforced polyurethane/epoxy resin IPN composites could be used as structural damping materials.
Water-lubricated bearings play a critical role in underwater propulsion systems but are often prone to failure due to mechanical wear and vibration, especially under high loads and prolonged friction. In response to this issue, our study introduces a novel approach: a dual network co-crosslinking strategy utilizing hydrogenated nitrile butadiene rubber (HNBR). This strategy connects the rubber network with the epoxy network through epoxidized Eucommia ulmoides gum. A comprehensive analysis was conducted to assess the resulting composite’s damping, tribological, and mechanical properties. The results show that the material has excellent mechanical, damping, and tribological properties relative to pure HNBR, with a 65.9% increase in the damping temperature domain, a 78.5% increase in tensile strength, a low coefficient of friction of 0.022, and a high resistance to abrasion of 3.87 × 10−6 mm3/Nm. The successful synthesis of HNBR-based composites via the dual network co-crosslinking strategy underscores their potential as a practical solution for improving the reliability and prolonging the service life of water-lubricated bearings.
Although polymer-based self-lubricating materials have rapidly developed recently, intelligent lubricating materials with self-adaptable lubrication with external conditions changing are highly demanded, especially for harsh conditions. Herein, a shape memory epoxy resin based on the biphenyl units (BPEP) with tunable tribological behavior was systematically studied. X-ray diffraction (XRD), field emission scanning electron microscope (SEM), laser confocal three-dimensional profiler, and optical microscope were applied to analyze the friction and wear mechanism. Due to the presence of the specific biphenyl structural units, which could be performed a switching phase between crystalline and amorphous, that allows the self-assembly of the polymer chain under π–π interaction. As a result, the improving mechanical properties enable the BPEP to perform outstanding self-lubricating in a wide temperature range, and the friction coefficient (COF) can be tuned in a wide range of 0.10~0.175 by adjusting the temperature. The shape memory effect of the polymer refers to modulus changing and heat conversion during the shape morphing, and a thermal tunable tribological was observed based on the physicochemical properties varying of polymer with temperature changing. The shape memory effect of BPEPs drives the wear self-compensation so that a low wear rate (6.94 × 10−5 mm3 N−1 m−1) at 110 °C was obtained. The superb lubricating properties of this BPEP could broaden the application scope of shape memory polymers in the field of intelligent lubricating materials, and it is expected to guide future studies on the thermal regulating of tribological behavior.