The elytral surface of dung beetles is generally accepted to be self-cleaning due to its anti-adhesive properties. In this article, the wettability and adhesive properties of elytral surface (intact and treated with Acetone and Ethanol) of the beetle Geotrupes stercorarius were characterized. Since these properties are influenced by the surface structure and chemistry, the micro- and nanostructure of the elytra were observed using scanning electron microscopy and the surface roughness were estimated with white light interferometery, whereas the water contact angle and adhesion force of the elytra were evaluated using contact angle measurement device and force transducer, respectively. The results show that the microstructure of the elytra changed greatly after different chemical treatments and the changes in wettability were mainly related to the changes of elytra roughness after treatments. The differences in adhesion force between differently treated elytra and wet sand indicate that the molecular polarity of the elytral surface is decisive for its anti-adhesive (self-cleaning) property.
Although the cicada wing has a variety of functions and the nanostructure and surface properties of many species have been extensively investigated, there are no reports investigating diversity of nanostructures and wetting properties within a single species collected at locations with different rainfall conditions. In this study, the hydrophobicity and nanostructure dimensions of the forewing surface of Cryptotympana atrata were measured, based on specimens collected from 12 distributions with varying precipitation averages in China and Japan. The relationships among hydrophobicity, nanostructures, and precipitation were analyzed, and the adaption of hydrophobic nanostructures under different wet environments is discussed. The precipitation of locations in the years the samples of C. atrata were collected only has an effect on the diameter and spacing of wing surface nanostructure, and the multiple years of precipitation may have an influence on the basic diameter and spacing, as well as the height of protrusions. The rougher the wing surface, the stronger the hydrophobicity which was observed from samples taken where the rainfall conditions of the collection years are high. To our knowledge, this is one special example providing evidence of hydrophobic nanostructures found on a biological surface of a single species which shows adaption for specific wet environments.