The diffusion of Building Information Modelling (BIM) as a reference methodology, applied to the world of construction, leads to important changes in the design and the management of big constructions and infrastructures. However, although the BIM approach is necessary for managing the entire life cycle of a construction, today, this methodology is still rarely adopted beyond the design phase. This represents a major flaw because the management of every phase of the life cycle of buildings needs accurate preliminary planning. Certainly, one of the most complex and important phases of the life cycle of a construction is the monitoring phase, which represents a fundamental aspect for the maintenance and the safe fruition of buildings or civil constructions. Considering this, the multidisciplinary approach of merging BIM methodology with real-time monitoring, using low-cost IoT (Internet of Things) sensors, seems to be an interesting topic to develop. In this paper, we will propose an example of a connection between an IoT system and a BIM model for monitoring the deflection of a bridge beam at the centerline using a schematic scale model reproduced in the laboratory and modelled in BIM. The developed system allows the real-time connection between the real model and its digital twin through the use of a relational database management system (RDBMS), to which the data detected by the sensor are transmitted, allowing the risk assessment of the real structure. This solution gives the possibility to remotely monitor, in real time, the behaviour of the structure visualised in the BIM model.
The latest results obtained through photogrammetric restitution enhanced by GNSS (Global Navigation Satellite System) RTK (Real-Time Kinematic) survey achieved increased levels of accuracy. These survey solutions are used to rapidly obtain a detailed model with an excellent level of accuracy (centimetric) with cheaper equipment. However, the contour conditions are not always favorable for obtaining the best results in a simple way. The work presented in this paper shows the survey and the photogrammetric restitution of the Manfredonic Castle of Mussomeli in Sicily, developed as a part of the PON NEPTIS European Project, aimed at the valorization of Cultural Heritage (CH). This case is a typical example of a complex survey carried out in an impervious environment where traditional survey procedures are totally useless or require a longer amount of time and great effort if a high level of accuracy is requested. In this case, considering the natural conditions of the site, the only way to perform the task has been the use of photogrammetric restitution based on UAV (unmanned aerial vehicle) technologies and GNSS survey. The precision obtained from the results allowed us to create a geometric 3D reconstruction of the monumental complex of the castle for the valorization of the site, which was the main goal of the whole process. The procedure that is the focus of this work is a test of rapid 3D CH survey and documentation in an impervious environment.
29 November 2019 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
The case study, faced in this paper, arises in the context of Interreg Italia-Malta European project named I-Access, dedicated to the improvement of accessibility to Cultural Heritage (CH). Accessibility considered not only as the demolition of physical architectural barriers, but also as the possibility of fruition of CH through technological tools that can increase its perception and knowledge. Last achievements in photogrammetry and terrestrial laser scanner (TLS) technology offered new methods of data acquisition in the field of CH, giving the possibility of monitoring and processing big data, in the form of point clouds. Ever in this field, reverse engineering techniques and computer graphics are even more used for involving visitors to discover CH, with navigation into 3D reconstructions, empowering the real visualization adding further 3D information through the Augmented Reality (AR). At the same time, recent advances on rapid prototyping technologies grant the automated 3D printing of scaled 3D model reconstructions of real CH elements allowing the tactile fruition of visitors that suffer from visual defects and the connection with 3D AR visualizations. The presented work shows how these technologies could revive an historical square, the Piazza Garraffo in Palermo (Italy), with the virtual insertion of its baroque fountain, originally placed there. The final products of this work are an indoor and an outdoor AR mobile application, that allow the visualization of the historical original asset of the square. This study case shows how the mixing of AR and the rapid prototyping technologies could be useful for the improvement of the fruition of CH. This work could be considered a multidisciplinary experimentation, where different technologies, today still in development, contribute to the same goal aimed at improving the accessibility of the monument for enhancing the fruition of CH.
30 May 2018 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Recently, the diffusion of knowledge on Cultural Heritage (CH) has become an element of primary importance for its valorization. At the same time, the diffusion of surveys based on UAV Unmanned Aerial Vehicles (UAV) technologies and new methods of photogrammetric reconstruction have opened new possibilities for 3D CH representation. Furthermore the recent development of faster and more stable internet connections leads people to increase the use of mobile devices. In the light of all this, the importance of the development of Virtual Reality (VR) environments applied to CH is strategic for the diffusion of knowledge in a smart solution. In particular, the present work shows how, starting from a basic survey and the further photogrammetric reconstruction of a cultural good, is possible to built a 3D CH interactive information system useful for desktop and mobile devices. For this experimentation the Arab-Norman church of the Trinity of Delia (in Castelvetrano-Sicily-Italy) has been adopted as case study. The survey operations have been carried out considering different rapid methods of acquisition (UAV camera, SLR camera and smartphone camera). The web platform to publish the 3D information has been built using HTML5 markup language and WebGL JavaScript libraries (Three.js libraries). This work presents the construction of a 3D navigation system for a web-browsing of a virtual CH environment, with the integration of first person controls and 3D popup links. This contribution adds a further step to enrich the possibilities of open-source technologies applied to the world of CH valorization on web.
26 August 2019 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
The extension of accessibility of CH to disabled people is a current topic of great importance. Today, there exist a lot of ongoing projects aimed at the extension of accessibility using the most recent and low cost technologies to improve accessibility to CH. One of the technologies, today available that can help to improve accessibility to CH, is certainly rapid prototyping. The main goal of the research here illustrated is the application of rapid prototyping for the extension of accessibility of Cultural Heritage (CH) to blind and visually impaired people. This document reports an experiment that compared the effectiveness of different 3D models for the introduction of blind and visually impaired people to the tactile use of models of monuments. In addition, this study focuses on defining standards and guidelines regarding features of 3D models, e.g. print resolution, in order to obtain greater legibility of models at different scales by the blind or visually impaired people. This paper shows a part of a wider Interreg EU research project, named I-ACCESS, aimed to study accessibility problems and solutions for CH. The experiments conducted with the sample of disabled people, allowed to obtain results on the most suitable printing parameters to be used.