Ogutu Isaya Elly

Dr. Ogutu Isaya Elly

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 September 2023 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
UAUgonna Loveday Adizue
Ugonna Loveday Adizue
ATAmanuel Diriba Tura
Amanuel Diriba Tura
OEOgutu Isaya Elly
Ogutu Isaya Elly
BFBalázs Zsolt Farkas
Balázs Zsolt Farkas
MTMárton Takács
Márton Takács
High-quality machining is a crucial aspect of contemporary manufacturing technology due to the vast demand for precision machining for parts made from hardened tool steels and super alloys globally in the aerospace, automobile, and medical sectors. The necessity to upheave production efficiency and quality enhancement at minimum cost requires deep knowledge of this cutting process and development of machine learning-based modeling technique, adept in providing essential tools for design, planning, and incorporation in the machining processes. This research aims to develop a predictive surface roughness model and optimize its process parameters for ultra-precision hard-turning finishing operation. Ultra-precision hard-turning experiments were carried out on AISI D2 of HRC 62. The response surface method (RSM) was applied to understand the effect of process parameters on surface roughness and carry out optimization. Based on the data gained from experiments, machine learning models and algorithms were developed with support vector machine (SVM), Gaussian process relation (GPR), adaptive neuro-fuzzy inference system (ANFIS), and artificial neural network (ANN) for the prediction of surface roughness. The results show that all machine learning models gave excellent predictive accuracy with an average MAPE value of 7.38%. The validation tests were also statistically significant, with ANFIS and ANN having MAPE values of 9.98% and 3.43%, respectively. Additional validation tests for the models with new experimental data indicate average R, RMSE, and MAPE values of 0.78, 0.19, and 36.17%, respectively, which are satisfactory. The RSM analysis shows that the feed is the most significant factor for minimizing surface roughness Rɑ, among the process parameters, with 92% influence, and optimal cutting conditions were found to be cutting speed = 100 m/min, feed = 0.025 mm/rev, and depth of cut = 0.09 mm, respectively. This finding can be helpful in the decision-making on process parameters in the precision machining industry.

24 September 2024 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Open access
PDF file
OEOgutu Isaya Elly
Ogutu Isaya Elly
UAUgonna Adizue
Ugonna Adizue
ATAmanuel Tura
Amanuel Tura
BFBalázs Farkas
Balázs Farkas
The machinability of high-performance materials such as superalloys, composites, and hardened steel has been a big challenge due to their mechanical, physical, and chemical properties, which give them inherent complex machining characteristics. Additionally, majority of machinability tests conducted on these materials have been carried out on conventional and less precise lathes based on Taguchi, composite, and other designs of experiments that do not exploit all the possible combinations of cutting parameters. This work reports an investigation on ultra-precision hard turning (UHT) of cold work hardened AISI D2 steel of HRC 62, based on the full factorial design of experiment, carried out on an ultra-precision lathe. A theoretical analysis of the force components generated is reported. Modelling of the process, based on the resultant force, is also reported through a machine learning model. The model was developed from the experimental data and statistically evaluated with validation data. Its average MAPE values of 1.47%, 4.81%, and 10.66% for training, testing, and validation, respectively, attest to its robustness. The excellent coefficient of determination values, R2, also justify the model’s robustness. Multi-objective optimization was also conducted to optimize material removal rate (MRR), resultant force, and vibration simultaneously. For sustainable and efficient UHT, optimal cutting velocity (158.8 m/min), feed (0.125 mm/rev), and depth of cut (0.074 mm) were proposed to generate optimal resultant force (224.8 N), MRR (2603.6 mm3/min), and vibration (0.03 m/s^2) simultaneously. These results can be beneficial in planning UHT processes for high-performance materials.

23 May 2024 in Heliyon
Verified
Journal Article
Open access
ATAmanuel Diriba Tura
Amanuel Diriba Tura
OEOgutu Isaya Elly
Ogutu Isaya Elly
UAUgonna Loveday Adizue
Ugonna Loveday Adizue
BFBalázs Zsolt Farkas
Balázs Zsolt Farkas
MTMárton Takács
Márton Takács
Ultra-precision turning is a crucial process in the manufacturing industry as it helps to produce parts with high dimensional accuracy, surface finish, and tolerance. The process is similar to traditional turning but is carried out under special circumstances to achieve greater precision and surface finish. The process can be applied to conventional structural materials, but the demand for machining hardened steels is increasing. The optimization of ultra-precision turning of AISI D2 using cubic boron nitride (CBN) tools is a crucial aspect in the field of high-quality machining. This study aims to evaluate the performance of the process and identify the optimal parameters that result in the best quality components while using a CBN tool's ultra-precision turning of AISI D2. Ultra-precision turning process factors such as cutting speed, feed, and depth of cut were experimentally investigated to enhance the response output, such as surface roughness and cutting force components. The full factorial experimental design was used for determining the process characteristics under different conditions, and experimental results were applied to search for the optimum response of machining performance. The optimization process was done by combining the hybrid genetic algorithm-response surface methodology (GA-RSM) and the Taguchi-grey relational analysis (GRA) statistical tools. These methods are useful in situations where the relationship between the input variables and the output responses is complex and non-linear. The results showed that a hybrid GA-RSM approach, combined with Taguchi-GRA statistical analysis, can effectively find optimal process parameters, leading to the best combination of surface roughness and cutting force. In hybrid Taguchi - GRA, the optimal cutting conditions were found to be a cutting speed of 175 m/min, a feed of 0.025 mm, and a depth of cut of 0.06 mm. The findings of this study provide valuable insights for the optimization of ultra-precision CBN turning operations, contribute to the development of precision manufacturing technology, and can be used as a reference for similar machining processes.

8 April 2024 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Open access
PDF file
OEOgutu Isaya Elly
Ogutu Isaya Elly
YYYin Yang
Yin Yang
Aluminium alloys find wide applications in structural industries. They are only second to steel when it comes to their applications. Their wide application is due to their numerous good properties. They have a high resistance to corrosion and high fatigue strength. Their specific density, electrical and thermal properties make them stand out amongst many structural metals. Al 7075 is an alloy of aluminium in which zinc is the dominant alloying element. This alloy is in the 7xxx series of aluminium alloys, a series considered to be the strongest with yield strengths greater or equal to 500 Mpa. It, therefore, finds a wide application in aircraft structural components manufacturing and other areas where high strength is a critical property. Therefore, this paper focuses on the CNC milling process of aluminium 7075 to establish force components models and the optimal values for the critical process parameters. The work reported in this paper involved designing experiments and the development of force components and resultant force models from the experimentally acquired data. The models were validated, and their prediction ability was within the accepted range. The validated force component models were used to investigate the interaction effects of the process parameters on the respective force components. The resultant force model was eventually used as the objective function in the TLBO algorithm to acquire the optimal force and control parameters. After that, the optimal resultant force was used as a constraint parameter to demonstrate feed optimization relative to the other parameters.

8 January 2026 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
OEOgutu Isaya Elly
Ogutu Isaya Elly
MTMárton Takács
Márton Takács
BBBarnabás Zoltán Balázs
Barnabás Zoltán Balázs
The micromilling process still grapples with burr formation, which deteriorates product quality and raises production costs. The use of machine learning models and heuristic optimization algorithms for multi-objective burr control in micromilling remains limited, yet AI models are vital for Industry 4.0’s industrial revolution. This study introduces a multi-objective optimization method that reduces burr sizes relative to other process parameters. A full factorial series of experiments is performed on hardened AISI H13 (50 ± 1 HRC), measuring top burr height, workpiece’s average surface roughness, and mean roughness depth. Sensor signals related to force components and workpiece vibration are collected, processed, and used for model development. Artificial neural network (ANN) models, based on the response parameters, are then trained, tested, and validated before their weights and biases are extracted to create explicit ANN-based mathematical models, hereafter called surrogate ANN models. The models for burr sizes achieve prediction accuracies of 93% and 92% for up and down milling burr sizes, respectively, on validation data. This underscores their robustness. All models are later integrated to develop a multi-objective surrogate ANN, which functions as an objective function in genetic algorithm optimization (hereafter, MOGA). The surrogate ANN-MOGA reduces burr sizes by an average of 35%, and identifies optimal cutting parameters of f z = 4.05 μm/rev and a p = 26.86 μm. These findings are crucial for the successful micromilling of AISI H13 with TiAlN-coated carbide tools in an industrial setting. A comparative analysis with Response Surface Methodology-based multi-objective genetic algorithm (RSM-MOGA) optimization reveals that surrogate ANN-MOGA performs better.

19 January 2026 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
OEOgutu Isaya Elly
Ogutu Isaya Elly
MTMárton Takács
Márton Takács
Miniaturization is the future of the industrial revolution, and technologies like micromilling are crucial in ensuring that products meet market quality standards. Therefore, micromilling must be efficient and free from anomalies such as tool failures, vibrations, and chatter. The avoidance and detection of the anomalies can be achieved via force prediction due to their correlations. This work investigates the applicability of machine learning (ML) ensemble regressors for force prediction in micromilling. A systematic series of experiments was performed on hardened AISI H13 (50 ± 1 HRC), with force signals recorded, processed, and used to develop the regressors. Models including Random Forest (RF), stacked generalization, extreme gradient boosting (XGBoost), voting, adaptive boosting (AdaBoost), and gradient boosting (GB) were developed, evaluated, and compared. XGBoost achieved the best force prediction performance, with average RMSE , MAPE , and R 2 values of 0.41, 7.83%, and 0.98, respectively, on validation data. The XGBoost model was then utilized to develop the XGBoost-Grey Wolf Optimization algorithm, which optimized cutting parameters and forces. The optimization results indicate that a feed in the range [2.68–3.75 (µm/rev)] combined with an axial depth of cut in the range [25-47.97 (µm)] will yield optimal cutting ( F c = 1.55 N) and axial ( F z = 1.74 N) forces during micromilling of hardened steels using a TiAlN-coated carbide end mill. It is also found that the axial depth of cut is the most significant parameter in generating cutting forces, whereas feed has the highest impact in generating axial forces. These findings can enhance the precision of micromilling of hardened steels.