Flapping wing micro air vehicles (FWMAVs) are highly maneuverable, bio-inspired drones that can assist in surveys and rescue missions. Flapping wings generate various unsteady lift enhancement mechanisms challenging the derivation of reduced models to predict instantaneous aerodynamic performance. In this work, we propose a robust data-driven, quasi-steady reduced order model (ROM) to predict the lift and drag coefficients within a flapping cycle. The model is derived for a rigid ellipsoid wing with different parameterized kinematics in hovering conditions. The proposed ROM is built via a two-stage regression. The first stage, defined as “in-cycle” (IC), computes the parameters of a regression linking the aerodynamic coefficients to the instantaneous wing state. The second stage, defined as “out-of-cycle,” links the IC weights to the flapping features that define the flapping motion. The training and test datasets were generated via high-fidelity simulations using the overset method, spanning a wide range of Reynolds numbers and flapping kinematics. The two-stage regressor combines ridge regression and Gaussian process regression to provide estimates of the model uncertainties. The proposed ROM shows accurate aerodynamic predictions for a wide range of kinematics. The model performs best for smooth kinematics that generates a stable leading edge vortex (LEV). Remarkably accurate predictions are also observed in dynamic scenarios where the LEV is partially shed, the non-circulatory forces are considerable, and the wing encounters its own wake.
17 October 2024 in Journal of Open Source Software
Dimensionality reduction is an essential tool in processing large datasets, enabling data compression, pattern recognition, and reduced-order modeling. Many linear tools for dimensionality reduction have been developed in fluid mechanics, where they have been formulated to identify coherent structures and build reduced-order models of turbulent flows (Ranc et al., 2014). This work proposes a major upgrade of the software package MODULO (MODal mULtiscale pOd) (Ninni & Mendez, 2020), which was designed to perform Multiscale Proper Orthogonal Decomposition (mPOD) (Mendez et al., 2019). In addition to implementing the classic Fourier Transform (DFT) and Proper Orthogonal Decomposition (POD), MODULO now also allows for computing Dynamic Mode Decomposition (DMD) (Schmid, 2010) as well as the Spectral POD by Sieber et al. (2016), the Spectral POD by Towne et al. (2018) and a generalized kernel-based decomposition akin to kernel PCA (Mendez, 2023). All algorithms are wrapped in a 'SciKit'-like Python API, which allows computing all decompositions in one line of code. Documentation, exercises, and video tutorials are also provided to offer a primer on data drive modal analysis.
Hummingbirds and insects achieve outstanding flight performance by adapting their flapping motion to the flight requirements. Their wing kinematics can change from smooth flapping to highly dynamic waveforms, generating unsteady aerodynamic phenomena such as leading-edge vortices (LEV), rotational circulation, wing wake capture, and added mass. This article uncovers the interactions of these mechanisms in the case of a rigid semi-elliptical wing undergoing aggressive kinematics in the hovering regime at Re∼O(103). The flapping kinematics were parametrized using smoothed steps and triangular functions and the flow dynamics were simulated by combining the overset method with large eddy simulations. The analysis of the results identifies an initial acceleration phase and a cruising phase. During the former, the flow is mostly irrotational and governed by the added mass effect. The added mass was shown to be responsible for a lift first peak due to the strong flapping acceleration. The dynamic pitching and the wing wake interaction generate a second lift peak due to a downwash flow and a vortex system on the proximal and distal parts of the wing's pressure side. Conversely, aerodynamic forces in the cruising phase are mainly governed by the growth and the establishment of the LEV. Finally, the leading flow structures in each phase and their impact on the aerodynamic forces were isolated using the extended proper orthogonal decomposition.
Insects and birds take advantage of their flexible wings to modulate the aerodynamic forces and increase their flight efficiency. A deep understanding of the aeroelastic benefits could be valuable to design Flapping Wing Micro Air Vehicles (FWMAVs) that exploit nature’s full potential. This work presents an open-source, high-fidelity, Fluid-Structure Interaction solver (FSI) to simulate flapping and deforming wings. The proposed approach uses the code CoCoNuT to couple the Computational Structural Mechanics (CSM) software Kratos Multiphysics with the Computational Fluid Dynamics (CFD) software OpenFOAM. The coupling code relies on the Interface Quasi-Newton with Inverse Jacobian method (IQNI). The CSM evaluates the wing deformation using a classic Finite Element Method with shell elements, while the CFD solver uses the deformable overset method. In the CFD solver, the deformation of the wing is interpolated onto the grid’s boundaries to accurately simulate wings with large motion and deformation. The FSI solver is tested in the case of an airfoil in heave motion and validated with experimental data. The results demonstrate the strong influence of wing deformation on its aerodynamic performance
Hummingbirds and insects achieve outstanding flight performance by adapting their flapping motion to the flight requirements. Their wing kinematics can change from smooth flapping to highly dynamic waveforms, generating unsteady aerodynamic phenomena such as leading-edge vortices (LEV), rotational circulation, wing wake capture, and added mass. This article uncovers the interactions of these mechanisms in the case of a rigid semi-elliptical wing undergoing aggressive kinematics in the hovering regime at $Re\sim \mathcal{O}(10^3)$. The flapping kinematics were parametrized using smoothed steps and triangular functions and the flow dynamics were simulated by combining the overset method with Large Eddy Simulations (LES). The analysis of the results identifies an initial acceleration phase and a cruising phase. During the former, the flow is mostly irrotational and governed by the added mass effect. The added mass was shown to be responsible for a lift first peak due to the strong flapping acceleration. The dynamic pitching and the wing wake interaction generate a second lift peak due to a downwash flow and a vortex system on the proximal and distal parts of the wing's pressure side. Conversely, aerodynamic forces in the cruising phase are mainly governed by the growth and the establishment of the LEV. Finally, the leading flow structures in each phase and their impact on the aerodynamic forces were isolated using the extended Proper Orthogonal Decomposition (POD).