This paper describes the problems in route optimization of two-phase pipelines. Combining the hydraulic calculation with route optimization theory, this paper establishes an automatic route optimization model and adopts the general genetic algorithm (gGA) and steady-state genetic algorithm (ssGA) to solve the model, respectively, gets the optimal route, and discusses the influence of parameters setting to the result. This algorithm was applied in determining pipelines routes in coalbed methane gathering and transporting system in Shanxi Province, China. The result shows that the algorithm is feasible, which improves the hydraulic properties by reducing the pressure drop along the line while the pipeline length is still acceptable.
17 January 2022 in Petroleum Science and Technology
Underground gas storage (UGS) is usually constructed in a formation with complex geological characteristics, which makes the operation monitoring and safety management of this facility more difficult. This paper aims to develop a method for comprehensive stability evaluation of multiple salt caverns UGS with interlayers. An index system is established as the foundation of the analysis for evaluation, which includes six important factors: cavity shape, operation pressure, interlayer parameters, surrounding salt rock parameters, mechanical properties, and cavity spacing. The improved analytic hierarchy process (AHP) and entropy method are used to calculate the subjective and objective weights of each index respectively. Then the index weights are constructed in the form of combination weights. The fuzzy membership function method is applied to obtain a quantitative evaluation result. Based on the established evaluation model, the stability level of four multiple salt caverns UGSs with interlayer are successfully evaluated. The results show that the stable states of the four UGS facilities are all good. There is only a slight threat of instability in UGS2, which has the defects of too many interlayers, too large interlayer thickness and too small space between adjacent cavities.
15 June 2017 in Advances in Mechanical Engineering
The extraction of coalbed methane, unlike that of conventional gas resources, is characterized by low gas production and low pressure. The traditional optimization methods only focus on the surface system, ignoring the relationship between the surface system and coalbed methane production. Furthermore, the pipeline network suggested by these methods is based on the given productivity of a single well. This article proposes a surface system layout optimization architecture coupled with a production system simulation that considers the profit made in the production cycle as the objective function. Using case studies, we show that the proposed optimization method improves the gas production rate by about 10.9% and increases the profit by 2 million dollars. When the results are analyzed under different network topologies, the tree network emerges as the cheapest and the star network emerges as the most expensive in terms of ground investment. However, when considering productivity and profit, the star network is the best and the tree network is the worst, while the concatenated network is intermediate. The results show that the structure of the surface network has a considerable influence on the coalbed methane reservoirs. Therefore, this article recommends the star structure arrangement for the coalbed methane surface system.
13 April 2022 in Journal of Petroleum Exploration and Production Technology
The combination pressurization of the shale gas gathering system is one of the most common pressurization methods in the current engineering site, but it is mostly set by manual experience or simulation analysis, and thus the optimal pressurization scheme cannot be obtained. In order to optimize the pressurization mode of the shale gas gathering and transportation system, a mixed integer nonlinear programming model (MINLP) is established based on the existing pressurization mode of the shale gas field. The model takes the minimum total cost of the compressor unit as the objective function. Various constraints are also taken into account, such as pipe pressure, flowrate, compressor related, well and platform throttling, uniqueness for well and platform pressurization. Solving this optimization model can figure out the appropriate pressurization position, operating power, and compressor unit cost. An actual case for a shale gas block is applied to determine the combined pressurization scheme suitable for this production condition. The results show that the combination of more pressurization methods can meet the pressurization requirements under different production conditions. When both well and platform pressurization are considered, the optimized pressurization position is more concentrated, the number of compressors is reduced by two sets, and the total compressor cost is reduced by 99.28 × 104 Yuan, which reflects the advantages of combined pressurization in the pressurization of shale gas gathering and transportation systems.
11 January 2023 in Journal of Energy Resources Technology