The method of thermogravimetry/differential scanning calorimetry–mass spectrometry–Fourier transform infrared (TG/DSC-MS-FTIR) simultaneous analysis has been used to study thermal decomposition of ammonium perchlorate (AP). The processing of nonisothermal data at various heating rates was performed using NETZSCH Thermokinetics. The MS-FTIR spectra showed that N₂O and NO₂ were the main gaseous products of the thermal decomposition of AP, and there was a competition between the formation reaction of N₂O and that of NO₂ during the process with an iso-concentration point of N₂O and NO₂. The dependence of the activation energy calculated by Friedman's iso-conversional method on the degree of conversion indicated that the AP decomposition process can be divided into three stages, which are autocatalytic, low-temperature diffusion and high-temperature, stable-phase reaction. The corresponding kinetic parameters were determined by multivariate nonlinear regression and the mechanism of the AP decomposition process was proposed.

The effect of aluminum particle size (10.7 µm, 2.6 µm, and 40 nm) on the thermal decomposition of 1,3,5-trimethylene trinitramine (RDX) was investigated using differential scanning calorimetry (DSC), thermogravimetry–derivative thermogravimetry (TG-DTG), and DSC-TG–mass spectrometry (MS)–Fourier transform infrared (FTIR) spectroscopy, respectively. The results showed that the first exothermic peak (512 K) of RDX diminishes gradually with an increase in the nanosize aluminum content and is overcome by the second exothermic peak when the content of nano-Al reaches 30 wt%. The reaction mechanisms demonstrated by the nonisothermal kinetics of RDX in the absence and presence of 30 wt% Al were conformed to the Avrami-Erofeev equations for all of the RDX compositions. The nucleus growth factor for the RDX/40 nm Al mixture was found to be n = 2/3 compared to n = 3/4 for RDX with and without the microsized Al. The MS and FTIR analyses indicated that the thermal decomposition of RDX in the presence of Al nanopowders favors C-N bond cleavage over N-N bond cleavage as the rate determining step.