Based on the tunnel crack width identification, there are operating time constraints, limited operating space, high equipment testing costs, and other issues. In this paper, a large subway tunnel is a research object, and the tunnel rail inspection car is an operating platform equipped with industrial cameras in order to meet the requirements of the tunnel tube sheet crack width recognition of more than 0.2 mm, with the measuring instrument to verify that the tunnel rail inspection car in the state of uniform motion camera imaging quality has the reliability through the addition of laser rangefinders, the accurate measurement of the object distance and the calculation of the imaging plane and the angle of the plane to be measured, to amend the three-dimensional cracks. The pixel resolution of the image is corrected, the images imaged by the industrial camera are preprocessed, the YOLOv8 algorithm is used for the intelligent extraction of crack morphology, and finally, the actual width is calculated from the spacing between two points of the crack. The crack detection width obtained by image processing using the YOLOv8 algorithm is basically the same as the value of crack width obtained by manual detection, and the error rate of crack width detection ranges from 0% to 11%, with the average error rate remaining below 4%. Compared with the crack detection error rate of the Support Vector Machine (SVM), the crack extraction model is reduced by 1%, so using the tunnel inspection vehicle as a platform equipped with an industrial camera, YOLOv8 is used to realize the recognition of the shape and width of the cracks on the surface of the tunnel tube sheet to meet the requirements of a higher degree of accuracy. The number of pixels and the detection error rate are inversely proportional to each other. The angle between the imaging plane and the plane under test is directly proportional to the detection error rate. The angle between the vertical axis where the lens midpoint is located and the line connecting the shooting target and the lens center point is and the angle between the measured plane and the imaging plane is reciprocal, i.e., + = 90°. Therefore, using the inspection vehicle as a mobile platform equipped with an industrial camera and based on the YOLOv8 algorithm, the crack recognition of the tunnel tube sheet has the feasibility and the prospect of wide application, which provides a reference method for the detection of cracks in the tunnel tube sheet.
By choosing the right pavement maintenance plan, we can reduce resource utilization, reduce environmental pollution, and extend road life, which is important for improving social sustainability. At present, the selection of road maintenance programs mostly adopts multiple attribute decision-making (MADA), in particular, the analytic hierarchy process (AHP) is often used. However, this method needs to use expert scoring data, which leads to strong subjectivity and poor reliability. Therefore, it reduces the science of road maintenance scheme selection. In order to reduce the subjectivity of the score and obtain a more suitable road maintenance scheme, this paper applies a multi-criteria decision-making method that characterizes attribute information by triangular fuzzy numbers (TFN) in the discrete decision space. Firstly, we invite experts to score the importance of the selection of pavement preventive maintenance technical solutions with respect to the indicators affecting the selection of solutions. Secondly, the two indicators of similarity and reliability are used to quantitatively evaluate the indicators and programs, respectively. Finally, we compare the weighted programs according to the overall possibility degree of each program. In actual cases, the overall possibility degree of each scheme obtained by this method is 1.0002–0.0477, and the optimal solution is fog sealing technology. The decision-making model applied in this paper can be considered in multiple dimensions, which can scientifically reduce the subjectivity of expert scoring. The best maintenance plan can also be quickly obtained through the simple calculation method in this paper.
6 October 2024 in Developments in the Built Environment
The fluid-saturated porous continuous barrier has a better vibration isolation effect than the single-phase solid continuous barrier, and layer-forming saturated soils will have an impact on the vibration isolation effect of the barriers due to their irregular layer-forming distribution. Based on Biot’s theory of saturated porous media and Snell’s law, a dynamic model of a fluid-saturated porous continuous barrier in layered saturated soil is established in this study. By introducing the potential function and using the continuous boundary condition of the interface between the saturated soil and the barrier, the analytical solution of the inverse transmission amplitude ratio of a P1-wave passing through the fluid-saturated porous continuous barrier in stratified saturated soil is obtained. The rationality of the proposed method is verified by comparing the solution of the P-wave model at the interface between the elastic medium and the saturated coarse particle interlayer. The differences in the propagation characteristics of fluid-saturated porous continuous barriers in layered saturated soils, homogeneous saturated soils, and layered single-phase soils are analyzed via numerical examples, and the influence of changes in the physical and mechanical parameters of the fluid-saturated porous continuous barriers on the reflectance amplitude ratios under the conditions of a layered saturated soil foundation are also analyzed. The results show that the presence of fluid in the stratified saturated soil model changes the trend of the reflection amplitude ratio with the incidence angle. The reflection amplitude ratio of the P2-wave and the SV-wave increases first and then decreases with the increase in the incident angle, while the reflection amplitude ratio of P1-wave decreases first and then increases. Barrier thickness and porosity change the energy distribution relationship at the interface; a relatively thicker barrier thickness and a higher porosity would result in a higher amplitude of barrier reflections.
About Me
Long-term engaged in transportation infrastructure construction management and technology research and development.
Long-term engaged in transportation infrastructure construction management and technology research and development.