Titanium dioxide is the most used photocatalyst in wastewater treatment; its semiconductor capacity allows the indirect production of reactive oxidative species. The main drawback of the application of TiO₂ is related to its high band-gap energy. The nonmetal that is most often used as the doping element is nitrogen, which is due to its capacity to reduce the band-gap energy at low preparation costs. There are multiple and assorted methods of preparation. The main advantages and disadvantages of a wide range of preparation methods were discussed in this paper. Different sources of N were also analyzed, and their individual impact on the characteristics of N–TiO₂ was assessed. The core of this paper was focused on the large spectrum of analytical techniques to detect modifications in the TiO₂ structure from the incorporation of N. The effect of N–TiO₂ co-doping was also analyzed, as well as the main characteristics that are relevant to the performance of the catalyst, such as its particle size, surface area, quantum size effect, crystalline phases, and the hydrophilicity of the catalyst surface. Powder is the most used form of N–TiO₂, but the economic benefits and applications involving continuous reactors were also analyzed with supported N–TiO₂. Moreover, the degradation of contaminants emerging from water and wastewater using N–TiO₂ and co-doped TiO₂ was also discussed.

Parabens are widely used in different industries as preservatives and antimicrobial compounds. The evolution of analytical techniques allowed the detection of these compounds in different sources at µg/L and ng/L. Until today, parabens were already found in water sources, air, soil and even in human tissues. The impact of parabens in humans, animals and in ecosystems are a matter of discussion within the scientific community, but it is proven that parabens can act as endocrine disruptors, and some reports suggest that they are carcinogenic compounds. The presence of parabens in ecosystems is mainly related to wastewater discharges. This work gives an overview about the paraben problem, starting with their characteristics and applications. Moreover, the dangers related to their usage were addressed through the evaluation of toxicological studies over different species as well as of humans. Considering this, paraben detection in different water sources, wastewater treatment plants, humans and animals was analyzed based on literature results. A review of European legislation regarding parabens was also performed, presenting some considerations for the use of parabens.

The search for alternative water sources is pushing to the reuse of treated water coming from municipal wastewater treatment plants. However, this requires that tightened standards be fulfilled. Among them is the microbiological safety of reused water. Although chlorination is the mostly applied disinfection system, it presents several disadvantages, such as the high doses required and the possibility of formation of dangerous by-products. Moreover, the threat of antibiotic resistance genes (ARGs) spread throughout poorly treated water is requiring the implementation of more efficient disinfection systems. Ozone and photo assisted disinfection technologies are being given special attention to reach treated water with higher quality. Still, much must be done to optimize the processes so that cost-effective systems may be obtained. This review paper gives a critical overview on the application of ozone and photo-based disinfection systems, bearing in mind their advantages and disadvantages when applied to water and municipal wastewater. Also, the possibility of integrated disinfection systems is considered.

The olive mill industry is a relevant sector in the economy of Mediterranean countries, while it involves high consumption of water and the production of effluents with high environmental impact. The efficient treatment of olive mill wastewater (OMW) is of high relevance, particularly for these countries. Climate changes are leading to increasing periods of droughts, and water recovery from polluted streams is essential to ensure the sustainability of this scarce resource. A combination of various technologies involving physical, chemical, and biological processes has been developed for OMW treatment. However, the treatments studied have limitations such as the operation costs, difficulty of industrial scale-up, and the fact that the vast majority do not lead to suitable treated water for discharge/reuse. As such, it is urgent to develop a solution capable of efficiently treating this effluent, overcoming the disadvantages of existing processes to convert OMW from a serious environmental problem into a valuable source of water and nutrients. In this review, several studies based on the OMW treatment are critically discussed, from conventional approaches such as the physical (e.g. centrifugation, filtration, and adsorption) and biological (anaerobic digestion and anaerobic co-digestion) processes, to the most recent technologies such as advanced membrane filtration, advanced oxidation processes (AOPs) and sulfate radical based AOPs (SR-AOPs). Due to the complexity of the effluent, OMW cannot be efficiently treated by a single process, requiring a sequence of technologies before reaching the required characteristics for discharge into water courses or use in crop irrigation. Reviewing the published results in this matter, it seems that the sequence of processes encompassing ozonation, anaerobic digestion, and SR-AOPs could be the ideal combination for this purpose. However, membrane technologies may be necessary in the final stage of treatment so that the effluent meets legal discharge or irrigation limits.