The viscosity concept is introduced to granular powders after the analogous granular temperature is defined, and the viscosity equations are derived with the Eyring's rate process theory and free volume concept.
Because of their moderate penetration power, β-rays (high-energy electrons) are a useful signal for evaluating the surface contamination of nuclear radiation. However, the development of β-ray scintillators, which convert the absorbed high-energy electrons into visible photons, is hindered by the limitations of materials selection. Herein, we report two highly luminescent zero-dimensional (0D) organic—inorganic lead-free metal halide hybrids, (C13H30N)2MnBr4 and (C19H34N)2MnBr4, as scintillators exhibiting efficient β-ray scintillation. These hybrid scintillators combine the superior properties of organic and inorganic components. For example, organic components that contain light elements C, H, and N enhance the capturing efficiency of β particles; isolated inorganic [MnBr4]2− tetrahedrons serve as highly localized emitting centers to emit intense radioluminescence (RL) under β-ray excitation. Both hybrids show a narrow-band green emission peaked at 518 nm with photoluminescence quantum efficiencies (PLQEs) of 81.3% for (C13H30N)2MnBr4 and 86.4% for (C19H34N)2MnBr4, respectively. To enable the solution processing of this promising metal halide hybrid, we successfully synthesized (C13H30N)2MnBr4 colloidal nanocrystals for the first time. Being excited by β-rays, (C13H30N)2MnBr4 scintillators show a linear response to β-ray dose rate over a broad range from 400 to 2,800 Gy·s−1, and also display robust radiation resistance that 80% of the initial RL intensity can be maintained after an ultrahigh accumulated radiation dose of 240 kGy. This work will open up a new route for the development of β-ray scintillators.
1 October 2008 in Advances in Colloid and Interface Science
The tap density of a granular powder is often linked to the flowability via the Carr index that measures how tight a powder can be packed, under an assumption that more easily packed powders usually flow poorly. Understanding how particles are packed is important for revealing why a powder flows better than others. There are two types of empirical equations that were proposed to fit the experimental data of packing fractions vs. numbers of taps in the literature: the inverse logarithmic and the stretched exponential. Using the rate process theory and the free volume concept under the assumption that particles will obey similar thermodynamic laws during the tapping process if the “granular temperature” is defined in a different way, we obtain the tap density equations, and they are reducible to the two empirical equations currently widely used in literature. Our equations could potentially fit experimental data better with an additional adjustable parameter. The tapping amplitude and frequency, the weight of the granular materials, and the environmental temperature are grouped into this parameter that weighs the pace of the packing process. The current results, in conjunction with our previous findings, may imply that both “dry” (granular) and “wet” (colloidal and polymeric) particle systems are governed by the same physical mechanisms in term of the role of the free volume and how particles behave (a rate controlled process).
Inspired by the Marcus theory of electron transfer, electrical conductivity equations without reference to any specific materials are derived on the basis of Eyring’s rate process theory and the free volume concept.
28 July 2015 in Physical Chemistry Chemical Physics