Tien-Dung Nguyen

Dr. Tien-Dung Nguyen

Department of Materials Science and Engineering, Chungnam National University, Daejeon, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2024 in Materials
Verified
Journal Article
Open access
PDF file
TNTien-Dung Nguyen
Tien-Dung Nguyen
CSChetan Singh
Chetan Singh
DLDong-Hyun Lee
Dong-Hyun Lee
YKYou Sub Kim
You Sub Kim
TLTaeho Lee
Taeho Lee
SLSoo Yeol Lee
Soo Yeol Lee
Ti6Al4V (Ti64) is a versatile material, finding applications in a wide range of industries due to its unique properties. However, hydrogen embrittlement (HE) poses a challenge in hydrogen-rich environments, leading to a notable reduction in strength and ductility. This study investigates the complex interplay of solute hydrogen (SH) and hydride phase (HP) formation in Ti64 by employing two different current densities during the charging process. Nanoindentation measurements reveal distinct micro-mechanical behavior in base metal, SH, and HP, providing crucial insights into HE mechanisms affecting macro-mechanical behavior. The fractography and microstructural analysis elucidate the role of SH and HP in hydrogen-assisted cracking behaviors. The presence of SH heightens intergranular cracking tendencies. In contrast, the increased volume of HP provides sites for crack initiation and propagation, resulting in a two-layer brittle fracture pattern. The current study contributes to a comprehensive understanding of HE in Ti6Al4V, essential for developing hydrogen-resistant materials.

28 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
TNTien-Dung Nguyen
Tien-Dung Nguyen
Nooruddin AnsariNooruddin Ansari
Nooruddin Ansari
KLKeun Hyung Lee
Keun Hyung Lee
DLDong-Hyun Lee
Dong-Hyun Lee
JHJun Hyun Han
Jun Hyun Han
SLSoo Yeol Lee
Soo Yeol Lee
The phenomenon of hydrogen embrittlement (HE) in metals and alloys, which determines the performance of components in hydrogen environments, has recently been drawing considerable attention. This study explores the interplay between strain rates and solute hydrogen in inducing HE of Ti6Al4V alloy. For the hydrogen-charged sample, as the strain rate was decreased from 10−2/s to 10−5/s, the ductility decreased significantly, but the HE effect on mechanical strength was negligible. The low strain rate (LSR) conditions facilitated the development of high-angle grain boundaries, providing more pathways for hydrogen diffusion and accumulation. The presence of solute hydrogen intensified the formation of nano/micro-voids and intergranular cracking tendencies, with micro-crack occurrences observed exclusively in the LSR conditions. These factors expanded the brittle hydrogen-damaged region more deeply into the interior of the lattice. This, in turn, accelerated both crack initiation and intergranular crack propagation, finally resulting in a considerable HE effect and a reduction in ductility at the LSR. The current study underscores the influence of strain rate on HE, enhancing the predictability of longevity and improving the reliability of components operating in hydrogen-rich environments under various loading conditions.

20 December 2024 in Materials Science and Engineering: A
Verified
Journal Article
Closed access
TNTien-Dung Nguyen
Tien-Dung Nguyen
CSChetan Singh
Chetan Singh
TLTaeho Lee
Taeho Lee
KLKeun Hyung Lee
Keun Hyung Lee
DLDong-Hyun Lee
Dong-Hyun Lee
SLSoo Yeol Lee
Soo Yeol Lee

26 February 2026 in Mechanics of Materials
Verified
Journal Article
Closed access
TNThanh-Dat Nguyen
Thanh-Dat Nguyen
YKYou Sub Kim
You Sub Kim
BLByungju Lee
Byungju Lee
SHSoon-Ku Hong
Soon-Ku Hong
TNTien-Dung Nguyen
Tien-Dung Nguyen
SLSoo Yeol Lee
Soo Yeol Lee

24 December 2025 in Materials Science and Engineering: A
Verified
Journal Article
Closed access
TNTien-Dung Nguyen
Tien-Dung Nguyen
TLTaeho Lee
Taeho Lee
KLKeun Hyung Lee
Keun Hyung Lee
TNThanh-Dat Nguyen
Thanh-Dat Nguyen
DLDong-Hyun Lee
Dong-Hyun Lee
SLSoo Yeol Lee
Soo Yeol Lee

28 March 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
MLMinh Duc Le
Minh Duc Le
TNThanh Dat Nguyen
Thanh Dat Nguyen
TNTien-Dung Nguyen
Tien-Dung Nguyen
SLSoo Yeol Lee
Soo Yeol Lee
HNHong Hai Nguyen
Hong Hai Nguyen
KPKhanh Pham
Khanh Pham
The effects of Ti content on the microstructure, mechanical and magnetic properties of FeCoNiAl0.25Mn0.75Tix (x = 0, 0.25, 0.5 and 0.75) high-entropy alloys were systematically investigated. The microstructure evolved from a single-phase face-centered cubic (FCC) structure for the Ti0 alloy to a dual-phase FCC + body-centered cubic (BCC) structure for the Ti0.25 and Ti0.5 alloys, and ultimately to a multiphase structure (FCC + BCC + intermetallic, IM) for the Ti0.75 alloy. This microstructural evolution significantly influenced the alloy’s properties. Hardness increased markedly from 136.82 HV3 (Ti0) to 486.52 HV3 (Ti0.75), accompanied by enhanced yield strength and tensile strength, though elongation decreased, indicating a shift from ductile to brittle fracture behavior. Meanwhile, the saturation magnetization peaks at 1.014 Tesla (T) for the Ti0.5 alloy, increasing from 0.233 T for Ti0 and subsequently decreasing to 0.795 T for Ti0.75 alloy. The coercive force reached a minimum of 58 A/m in the single-phase FCC structure (Ti0), stabilizes at 324.5 A/m when FCC and BCC phases are balanced (Ti0.5), and increases to 638.5 A/m in the Ti0.75 alloy. The Ti0.5 alloy, with a hardness of 357.45 HV3, saturation magnetization of 1.014 T, and coercive force of 324.5 A/m, exhibits a promising combination of soft magnetic properties and high hardness, suggesting potential for applications in soft magnetic components where magnetic performance and surface hardness are required.