As the room temperature ionic liquid, the liquid crystal and some new liquid materials appear, some of these liquids have high refractive indices over the measurement range (1.30–1.70) of the conventional Abbe refractometer. Here a new refractometer using a liquid prism and the glancing incidence measurement is proposed. It has a simpler structure and a broader measurement range than the Abbe refractometer. The theoretic results indicate that the measurement range of this refractometer is 1.00–3.86 when the vertex angle of the liquid prism is 30°. The experimental results demonstrate the proposed refractometer is viable. This liquid prism based refractometer will have a good applied prospect because it is easy to convert into a product.
Here a 1×5 microfluidic optical switch using double drives is proposed. It has a simple structure and ignorable polarization dependent loss. First, the switch with the straight waveguide structure is discussed. Then, various optimization schemes are used, where the oblique waveguide structure and the method of constant refractive index ratio of interface significantly reduce the insertion loss. The final optimization results show that the 1×5 optical switch has smaller insertion loss and crosstalk than general optical switches. For 1550 nm wavelength, the insertion losses of five exit ports are 0.27 dB ∼ 0.47 dB, and the crosstalks are −24.8 dB ∼ −66.5 dB. For 1310 nm wavelength, the insertion losses are 0.13 dB ∼ 0.23 dB, and the crosstalks are −25.6 dB ∼ −70.8 dB. Our work can promote the application of microfluidics in the optical communication and provide a reference for finding waveguide optical switches with low insertion loss.
12 April 2019 in IOP Conference Series: Materials Science and Engineering
Piezoelectric materials have the merits of fast response speed and high precision. They have been widely used in MEMS and optoelectronic devices. Here piezoelectric materials are applied in the microfluidic drive technology. The proposed microfluidic drive technology has the advantages of small volume, simple structure and fast response speed. The researching results show that at 150V, the elongation length of the piezoelectric material is 18.556μm, the maximum driven displacement of fluid is 4.761mm, and the driven volume of fluid is 0.714μl. Our work can promote the applications of piezoelectric materials in microfluidics.
In this article, we propose a silicon optical filter utilizing multiple semi-rings to realize optical filtering. The structure of such filters is simple, adjustable, and integrated. By changing the number and spacing distance of semi-rings, the properties of the optical filter can be flexibly adjusted to meet different application requirements. Research results show that the optical filter has a 3 dB bandwidth of 2.52 nm, a free spectral range of 11.33 nm, and a finesse of 4.50. The silicon optical filter with multiple semi-rings is compared with a Mach–Zehnder-interferometer-based optical filter with the traditional structure, and it shows better performance. To the best of our knowledge, our work provides a new method for finding adjustable optical filters with compact structure and good performance.
A completely non-blocking electrically controlled optofluidic matrix switch that uses a optical switch with a V-shaped microchannel as the switching unit is proposed. Its light paths and output ports are selected by a micro-actuator matrix and a control circuit. There are few reports of optofluidic matrix switches. Here the given electrostatic micro-actuator and the basic switch structure provide an effective feasible manner for the matrix switch due to the simple and compact structure as well as the operation style. The impacts of microchannels and intersecting waveguides on the switch performance are discussed, and multiple optimization schemes are proposed to reduce the insertion loss efficiently and significantly. The research results indicate that the matrix switch has the advantages of good matrix controllability, simple structure, wide waveband (400–1700 nm), negligible polarization-dependent loss, small insertion loss, and low cross talk. For 1550 nm wavelength, the insertion loss of a matrix switch is about 0.17–0.55 dB, and the maximum cross talk is less than . In addition, the performance parameters of a matrix switch are given and compared with other reported matrix switches. The proposed matrix switch solves the problem of large insertion loss of general optical matrix switches and can be expanded to a large-scale matrix switch. Moreover, the design of multiple output ports has more flexible applications in systems with multiple branch optical paths and network nodes.