Heavy metal ions (HMIs) pose a serious threat to the environment and human body because they are toxic and non-biodegradable and widely exist in environmental ecosystems. It is necessary to develop a rapid, sensitive and convenient method for HMIs detection to provide a strong guarantee for ecology and human health. Ion-imprinted electrochemical sensors (IIECSs) based on nanomaterials have been regarded as an excellent technology because of the good selectivity, the advantages of fast detection speed, low cost, and portability. Electrode surfaces modified with nanomaterials can obtain excellent nano-effects, such as size effect, macroscopic quantum tunneling effect and surface effect, which greatly improve its surface area and conductivity, so as to improve the detection sensitivity and reduce the detection limit of the sensor. Hence, the present review focused on the fundamentals and the synthetic strategies of ion-imprinted polymers (IIPs) and IIECSs for HMIs detection, as well as the applications of various nanomaterials as modifiers and sensitizers in the construction of HMIIECSs and the influence on the sensing performance of the fabricated sensors. Finally, the potential challenges and outlook on the future development of the HMIIECSs technology were also highlighted. By means of the points presented in this review, we hope to provide some help in further developing the preparation methods of high-performance HMIIECSs and expanding their potential applications.

In this study, m-xylene biodegradation was examined in bacteria-water mixed solution and biotrickling filter (BTF) systems amended with the nonionic surfactant Tween 80. The mixed bacteria were obtained from the activated sludge of a coking plant through a multisubstrate acclimatization process. High-throughput sequencing analysis revealed that Rhodanobacter sp. was the dominant species among the mixed bacteria. In the bacteria-water mixed solution, the bacterial density increased with increasing Tween 80 concentration. Hence, Tween 80 could be utilized as substrate by the mixed bacteria. Tween 80, with concentrations of 50–100 mg L⁻¹, could enhance the bioavailability of m-xylene and consequently improve the degradation efficiency of m-xylene. However, further increasing the initial concentration of Tween 80 would decrease the degradation efficiency of m-xylene. At concentrations exceeding 100 mg L⁻¹, Tween 80 was preferentially degraded by the mixed bacteria over m-xylene. In BTF systems, when the m-xylene inlet concentration was 1200 mg m⁻³ and the empty bed residence time was 20 sec, the removal efficiency and elimination capacity of BTF1 with Tween 80 addition were at most 20% and 24% higher than those of BTF2 without Tween 80 addition. Overall, the integrated application of the mixed bacteria and surfactant was demonstrated to be a highly effective strategy for m-xylene waste gas treatment. Implications: The integrated application of mixed bacteria and surfactant was demonstrated to be a promising approach for the highly efficient removal of m-xylene. Surfactant can activate mixed bacteria to degrade m-xylene by increasing its bioavailability. Besides, surfactant can be utilized as carbon source by the mixed bacteria so that the growth of mixed bacteria can be promoted. It is expected that the integrated application of both technologies will become more common in future chemical industry.

Biochar application has the potential for mitigating N₂O emissions from agricultural soils and has been suggested as a management practice to ameliorate soil fertility and increase crop productivity. Nevertheless, the influence of biochar addition on N₂O emissions from soils with different pH levels is not yet clear, which results in a poor understanding of the mechanisms regarding biochar application to soil N₂O mitigation. A 40-day incubation experiment was carried out in the present study to investigate the impact of biochar on N₂O emissions from soils with different natural pH. Four treatments (control, nitrogen fertilizer application, biochar amendment, and N plus biochar amendment) were set up separately in soils with three different natural pH levels (acidic vegetable soil, neutral rice soil, and alkaline soil). Our results showed that adding biochar significantly decreased N₂O emissions by 20.8% and 47.6% in acidic vegetable soil for both N and no N addition treatments, respectively. For neutral and alkaline soils, the reduction of N₂O emissions by biochar amendment was only significant for N addition treatments in alkaline soil. Soil pH and NO₃⁻-N concentration were significantly affected by biochar amendment (soil pH increased by 1.43–1.56, 0.57–0.70, and 0.29–0.37 units for acidic vegetable soil, neutral rice soil, and alkaline soil, respectively). Thus, biochar amendment could be used as an effective management practice for mitigating N₂O emissions from acidic and alkaline soils.