During the operation of combine harvesters, the cutting platform height is typically controlled using manual valve hydraulic systems, which can result in issues such as delays in adjustment and high labor intensity, affecting both the quality and efficiency of the operation. There is an urgent need to enhance the automation level. Conventional methods frequently employ single-point measurements and lack extensive area coverage, which means their results do not fully represent the terrain’s variations in the area and are prone to local anomalies. Given the inherently undulating terrain of farmland during harvesting, a control strategy that does not adjust for minor undulations but only for significant ones proves to be more rational. To this end, a sine wave superposition model was established to simulate three-dimensional ground elevation changes, and an area array LiDAR was used to collect 8 × 8 data for the header height. The effects of mounds and stubble on the measurement results were analyzed, and a dynamic process simulation model for the solenoid valve core was developed to analyze the on/off delay characteristics of a three-position four-way electromagnetic directional valve. Moreover, a physical model of the hydraulic system was constructed based on the Simscape module in Simulink, and the Bang Bang switch predictive control system based on position threshold was introduced to achieve early switching of the electromagnetic directional valve circuit. In addition, an automatic control system for cutting platform height was designed based on an STM32 microcontroller. The control system was tested on the hydraulic automatic control test rig developed by Shanxi Agricultural University. The simulation and experimental results demonstrated that the control system and strategy were robust to output disturbances, effectively enhancing the intelligence and environmental adaptability of agricultural machinery operations.

To solve the problem of large sowing amount and poor sowing uniformity for millet, according to the physical characteristics of the millet seed and its sowing agronomic requirements, an electromagnetic vibration type fine and small-amount seeder was designed, and the main technical parameters of the seeder were determined, in order to realize the functions of furrow opening, electronically controlled seed metering, soil covering and pressing. Based on the principle of electromagnetic vibration, an electromagnetic vibration type seed metering device was designed to achieve uniform seeding of the millet seed with a small sowing amount; a seeding amount electronic control device was designed using an STM32 microcontroller, which realized the switching to sowing agronomic mode and the adjustment of the seeding amount with sowing operation speed; a vibration experimental bench was set up to simulate the vibration state of field operation, and studies on the seeding performance and vibration damping of the seed metering device by the isolation spring were carried out, as well as field sowing tests for verification. When the working voltage of the seed metering device is 80–160 V, the coefficients of variation for seeding uniformity per row and for total seeding uniformity are not greater than 3.57% and 2.39%, respectively, and the seed damage rate is less than 0.5%. The installation of isolation springs can increase the maximum vibration acceleration of the seed metering device by 10.61–28.20%, significantly reducing the impact of external vibrations on the seed metering device. Within the range of suitable sowing operation speeds, the electronic control device can meet the seeding amounts along with sowing operation speed in the 6, 7.5 and 9 kg/hm² sowing agronomic modes, and the coefficient of variation for seeding uniformity per row, for total seeding uniformity and for sowing uniformity are not greater than 4.63%, 2.48% and 23.38%, respectively. This study provides a reference for the development of sowing machinery for millet crop.

Mechanical weeding is an important technical means for organic and regenerative agricultural systems. Current weed control equipment has a variety of problems, such as difficulty adapting to high-stalk crops and poor operational quality. A high-clearance mid-tillage weeder (HMTW) has been developed to meet the mechanical weed control needs of high-stalk crops. The weeder mainly comprises a suspension device, a frame, parallel four-rod profiling mechanisms, weeding operation components, and depth-limiting soil-cutting devices. Based on the agronomic requirements of dryland flat planting, the overall structure of the HMTW was determined, and the weeding unit and flat shovel hoe were designed. Theoretical analysis was conducted on the depth stability of the HMTW, and an optimization mathematical model of the HMTW was established to further improve its tillage depth stability for agronomic requirements. The optimization objective was to minimize the deflection angle (∆β) of the profiling rod on a vertical plane, and the parameters of the parallel four-rod profiling mechanism were optimized. Based on the optimized structural parameters, a prototype of the HMTW was developed and evaluated. The test results show that the optimized HMTW exhibited a good weeding effect, and the tillage depth stability was within the design operating range. When the driving speed was 1.0 m/s and the tillage depth was 8 cm, the weed removal rate, seedling injury rate, seedling burial rate, and qualified rate of tillage depth were 90.8%, 3.2%, 4.1%, and 94%, respectively. The proposed HMTW successfully meets the weeding agronomic requirements of high-stalk crops for dryland farming, and the performance analysis and optimization models provide technical references for the design and development of such structures.

To reduce grain loss during pickup and prevent stalk entanglement in buckwheat harvesters, thereby improving the quality of mechanized harvesting, a three-stage pickup conveyor roll with a ground-level rotary knife-type pickup header was designed and tested. This paper, based on the growth characteristics of buckwheat, determined the three-stage pickup conveying process and the overall structure of the ground-level rotary knife-type pickup header. Kinematic analysis and parameter design of the rotary knife-type pickup roll were conducted. Finally, a physical prototype was fabricated, and field performance tests were carried out, using machine forward speed and pickup roll rotational speed as influencing factors and pickup loss rate as an evaluation metric. Results showed that the interaction between pickup roll rotational speed and forward speed had a significant effect on the pickup loss rate, with forward speed having a greater impact than pickup roll rotational speed. Under consideration of their interaction, when the pickup roll rotational speed was within the range of 396–457 r/min, and the forward speed was between 0.9–1.0 m/s, the pickup loss rate was minimized. Based on the regression equation model, the predicted optimal conditions were a forward speed of 1.0 m/s and a roll pickup speed of 396 rpm. Under these conditions, the test results showed a pickup loss rate of 5.235%, indicating good pickup performance. This research provides a reference for the design of pickup devices in grain combine harvesters.