Flammable litter such as Pinus koraiensis needle accumulation increases the risk of wildfire. In the event of a high-intensity fire, forest resources can be severely damaged. To reduce the occurrence of forest fires, it is important to reduce loads and modify structures. This study conducted 270 indoor degradation experiments to determine physicochemical properties of Pinus koraiensis during the combustion degradation process. Combustion degradation treatment variables were constructed with different durations, Trichoderma fungi, and doses. The results show that the physicochemical properties of flammable litter changed significantly after degradation, with a maximum degradation rate of 11. The degradation rate was affected by time and microbial agents, but there was no significant difference between different doses. Principal component analysis was used to determine overall combustibility, and it was found that a dose of 4 mL of Trichoderma harzianum had the best effect on degradation for 42 days, reducing combustibility by 203%. It was found that the 6ml composite mould had the best inhibitory effect on fire spread rate, reaching the lowest value. After 42 days, the flame intensity of 4 mL Trichoderma harzianum reached its lowest value of 57.17 kw/m, which represents a decrease of 54% compared to the initial value. Similarly, the flame’s length reached its lowest value of 4.91 cm, which represents a decrease of 31% compared to the same period last year. The aim of this study is to establish the relationship between time, microbial agents, dosage, flammable physical and chemical properties, overall flammability, and potential fire behaviour. The values of the goodness-of-fit index and the comparative fit index are both >0.98, and the values of the standardised root mean square residual and the approximate root mean square error are both <0.05. This study has a positive effect on accelerating the decomposition of combustibles, reducing the content of flammable components, reducing flammability and potential fire behaviour, and reducing the risk of forest fires. It is of great significance for strengthening natural resource management and forest ecological conservation.

Since forest fuel decomposes slowly and increases the risk of forest fires by accumulating over the years, forest fuel management to accelerate the decomposition process is essential to prevent forest fires and protect forest resources. In this study, we conducted experiments on forest fuels (Pinus sylvestris var. mongholica, Larix gmelinii, Quercus mongolica and Fraxinus mandshurica) in four typical plantation forests in northeast China by adding Trichoderma spp. to investigate the decomposition process and the changes in cellulose, hemicellulose and the water-holding capacity of the fuels. The addition of Trichoderma spp. accelerated the decomposition of cellulose, hemicellulose and lignin in the fuel. Trichoderma spp. promoted the ratio of water absorption and loss, as well as the water-holding capacity of the fuels. The ratio of water absorption and loss reached equilibrium when the decomposition time was up to 35 days, and the addition of Trichoderma spp. increased the maximal water-holding capacity of the fuel. The residual ratio of the four types of fuel degraded by the different treatments was inversely proportional to their maximal water-holding capacities and to the residual ratios of cellulose, hemicellulose and lignin. The residual ratios of degradation of the four fuels under different treatments were linearly related to their maximum water-holding capacity, cellulose, hemicellulose and lignin residual ratios. Trichoderma spp. had a positive effect on the degradation effect and water-holding capacity of fuel on the ground surface of four typical plantation forests. The study is of positive significance for the decomposition of fuel in forests, it promotes the development of biological fire prevention technology and provides a basis for the reinforcement of the management of fuel in forests and the protection of forest resources.

The accurate measurement of surface fire carbon emissions is critical for assessing their impact on carbon sinks and role in climate change. This study aims to investigate the relationships between surface fire behaviour characteristics and carbon consumption for Pinus koraiensis plantation forests and construct a carbon consumption prediction model. A total of 288 combustion experiments were conducted on a laboratory burning bed using varying fuel loads, moisture contents, and slope conditions, with measurements taken of surface fire behaviour characteristics and the carbon content of combustion ash. The Byram fireline intensity model was reintegrated to build a predictive model for fuel combustion carbon consumption, and the model parameters were adjusted based on the results of the combustion experiments. The direct use of the Byram fireline intensity model parameters predicted surface fire carbon consumption in Pinus koraiensis plantation forests with significant errors (R² = 0.75; MAE = 0.197 kg m⁻²; MRE = 66.76%). After the parameters were modified using the combustion experiment data, the new model yielded R² = 0.75, MAE = 0.087 kg m⁻², and MRE = 28.28%. This study significantly improved the accuracy of the new model in predicting the carbon consumption of surface fuel combustion in Pinus koraiensis plantation forests.

This paper aimed to provide technical support for fuel management by exploring different strengths of fuel removal on the physical and chemical properties and flammability of Betula platyphylla forests in the wildland–urban interface. After investigating the northeastern region during the forest fire prevention period in May 2023, a typical WUI area was selected, and three different treatment strengths, combined with a control, were set up to carry out indoor and outdoor experiments for 27 weeks. Compared with previous studies, this study mainly investigated and analyzed the dynamic changes in the physical and chemical properties and fuel flammability after different intensities of treatments on a time scale. By processing and analyzing the data, the following results were obtained. Significant differences existed in the fuel loading of different time-lag fuels over time (p < 0.05). The ash and ignition point of 1 h time-lag fuel after different treatment intensities generally increased first and then decreased, and the higher heat value and ash-free calorific value generally decreased first and then increased. The physical and chemical properties of 10 h and 100 h time-lag fuel fluctuated with time, but the overall change was insignificant. The indicator that had the greatest impact on the combustion comprehensive score for different time-lag fuels was fuel loading. The change in the flammability of dead surface fuel with time varied significantly, and different treatment intensities effectively reduced the fuel’s flammability. The reduction effects, presented in descending order, were as follows: medium-strength treatment > low-strength treatment > high-strength treatment > control check. In conclusion, different treatment intensities have significant effects on the flammability of the fuel, and the medium-strength treatment has the best effect. Considering the ecological and economic benefits, adopting the medium-strength treatment for the WUI to regulate the fuel is recommended.