This paper proposes an intelligent modeling and optimization method to set up the smart energy hub model for the multiple energy system and optimize the operation of its associated energy hub model automatically. The core idea of the proposed method is to divide the complex energy hub model into several simple energy hub models. In this paper, the proposed computerized algorithm, which is applied to the smart energy hub model division, includes an energy loop intelligent searching method, a real nodes arrangement method, and a virtual nodes insertion method. One case study for the multiple energy system of a residential district in Guangzhou city is performed to validate the effectiveness of the proposed method. Compared with the traditional calculation method, the proposed method guarantees global optimal operation decision for the whole multiple energy system and the computational burden is significantly reduced.
13 January 2023 in IEEE Transactions on Vehicular Technology
Permanent magnet synchronous motor (PMSM) provides a very competitive technology for electric vehicle (EV) traction drive with its higher power density and higher efficiency. When the control system of PMSM for EV is affected by the change of motor parameters and the interference from the external environment, the motor system cannot provide high-quality dynamic performance in time. In the paper, an EV motor control strategy based on improved sliding mode and proportional resonance theory is proposed, in which a speed controller is designed based on the improved exponential reaching law. The improved exponential approximation law overcomes chattering in traditional sliding mode control without increasing parameters and improves the anti-interference performance of the EV. In addition, the improved proportional resonance method is used to design the current controller of the PMSM control system, and the combination of the two has been successfully applied to EV for the first time. Finally, the experiment and urban road condition test are carried out to verify. The results show that the proposed scheme can effectively improve the dynamic performance and robustness of the PMSM system for EVs.
1 March 2019 in CES Transactions on Electrical Machines and Systems
Chemical compounds dissolved in insulating oil, as indicators can excellently monitor the paper aging condition, which has attracted increasing interest in areas of transformer condition monitoring and fault diagnosis. Because of their outstanding features, such as good correlation with the degree of polymerization of cellulose paper and the aid of non-destructive online monitoring, chemical indicators have been effectively used for transformer condition assessment. In this study, a comprehensive, in-depth insight into the indicators of the aging of insulating paper from aging characteristics, physico-chemical characteristics, shortcomings of various compounds, generation pathways and mechanisms, and monitoring technologies are provided. It is expected that these chemical indicators can provide better guidance for the evaluation of paper insulation performance and transformer aging. In addition, the latest research progress, as well as current challenges and future prospects are also outlined. This study provides a theoretical basis and reference for chemical indicators in the fields of microscopic formation mechanism, diffusion equilibrium phenomenon, and insulation aging state assessment.
23 May 2024 in IEEE Transactions on Power Delivery
In the field of fault diagnosis and maintenance of substation equipment, infrared detection plays a crucial role, however, infrared images often contain noise. Traditional real-time infrared detection algorithms tend to perform poorly on small targets and cannot extract global information. To address these issues, this paper proposes the You Only Look Once model for Infrared images of Substation Equipment(ISE-YOLO). In order to enhance the image feature extraction capability of the model, ISE-YOLO designs a feature extraction module called Global-Local Fusion Module(GLFM). Secondly, ISE-YOLO proposes the Multi-Granularity Downsampler(MGD), which preserves more small target information in downsampling by fusing coarse and fine granularity features. Moreover, ISE-YOLO constructs the Re-parameterized Decoupling Head(RDHead) and utilizes an auxiliary detection head to improve the model's detection accuracy. To accommodate different performances of inspection equipment, we design two scales of object detection models: ISE-YOLO-L and ISE-YOLO-S. Additionally, this paper creates a category-rich dataset for infrared images of substation equipment and proposes a preprocessing method for thermal images. In our dataset, ISE-YOLO-L outperforms the advanced real-time object detector, YOLOv7, by 1.3% in Average Precision(AP), and achieves 6.2% higher AP in small object detection compared to RTMDet-L. Moreover, ISE-YOLO-S surpasses RTMDet-S by 1.1% in AP.
6 December 2017 in IEEE Transactions on Industrial Electronics
Inverter-fed induction machines' iron loss characteristics become more complicated because of the harmonics brought by pulse width modulated (PWM) voltage-source power supplies. There are two main difficulties associated with analyzing the iron loss of induction motors, i.e., the identification of rotor flux density harmonics and the accurate prediction of iron loss. In order to reveal the iron loss characteristics of the inverter-fed induction motors, especially on the rotor side, a computationally efficient rotor flux density harmonics identification method using data from a single power supply fundamental frequency cycle (supply cycle) is proposed. With the proposed identification method, the rotor iron loss characteristics of a 5.5- and a 30-kW inverter-fed induction motors are investigated. By comparing the predicted and measured iron losses of those induction motors under both sinusoidal and PWM inverter voltage supplies, the effectiveness of the proposed method is validated. Furthermore, the detailed iron loss characteristics of the two induction machines under both sinusoidal and PWM inverter voltage supplies are studied.