Neuromodulation (NM) is the alteration of nervous tissue function through targeted delivery of a stimulus, such as electrical stimulation, into the affected neurological sites in the body. We present a "holy- grail" bi-directional NM interface that features 100mVpp linear input range and ability to sense data concurrent with stimulation (without blanking). The system includes a flexible 8-driver-to-64-contact custom waveform stimulator able to deliver up to 5.1mA per driver and a 64-contact sensing unit with online blind artifact rejection unit. This artifact rejection unit removes stimulation artifacts from recorded data and allows extraction of neural biomarkers. The NM interface also features an efficient, integrated power management unit that can support various power delivery options. The proposed 64-contact interface satisfies design requirements of human-grade brain implants at unprecedented level of electronic miniaturization (15x reduction) compared to state-of-the-art.
28 November 2019 in IEEE Journal of Solid-State Circuits
An ultra-low-power (ULP) capacitive micro-electromechanical systems (MEMS) accelerometer analog front-end (AFE) chip with 290-μg/√Hz noise floor and 252-nW power consumption is presented. To achieve such low-noise characteristics under ULP operation, the proposed AFE utilizes a novel circuitry scheme, namely, feedforward noise reduction technique (FNRT), which cancels some of the correlated noise. The FNRT is a simple modification of the conventional self-balancing bridge (SBB) architecture without using any extra power and it can relax the noise requirement on amplifiers in AFE, thereby reducing its power consumption. The designed system uses an SAR ADC employing a simple signal-to-noise ratio (SNR) enhancement technique and includes a finite state machine (FSM) to enable dynamic configuration and duty-cycling operation. The AFE chip is implemented in a 0.18-μm complementary metal-oxide-semiconductor (CMOS) process and achieves a dynamic range of 65 dB and the bias instability of 62.8 μg.
A small-area low-power low-noise instrumentation amplifier (IA) is desired in arrayed sensor devices that are used for high-spatial-resolution biomedical and environment monitoring systems. This paper presents a 0.06mm 2 chopper-stabilized current-feedback IA with 13.5nV/√Hz input-referred noise and less than 3.5μV offset voltage. For significantly reducing the ripple due to chopping, the proposed IA uses a novel digital calibration scheme, namely, automatic differential-pair matching (ADPM), which enables a small die area and low-power operation. The proposed IA is implemented in a standard 0.18μm CMOS and achieves a noise efficiency factor (NEF) of 7.2 while drawing 194μA. The active area of the IA is 7.8× smaller than that of the state-of-the-art [1-5] while it maintains low output ripple, low noise, and low power.
29 September 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
In this paper, we propose a CMOS current comparison circuit operating at cryogenic temperature to readout spin quantum bit (qubit) states via a charge sensing scheme. A current integrator and correlation double sampling circuit are implemented in the proposed current comparator since precise current sensing is required to achieve readout the states of qubits. The measurement results indicate the feasibility that the reduced readout time by a factor of 1/100 and 100-times better current resolution with the readout fidelity of 99.9 % compared to the conventional readout systems are achieved. Additionally, the current and noise specifications for a charge sensor required to attain it are discussed. Furthermore, the proposed current comparator attains the best tradeoff among power, current resolution, and readout time, compared with the conventional cryogenic current readout circuits.
6 August 2014 in Analog Integrated Circuits and Signal Processing
A time-domain analog spatial compressed sensing encoder for neural recording applications is proposed. Owing to the advantage of MEMS technologies, the number of channels on a silicon neural probe array has doubled in 7.4 years, and therefore, a greater number of recording channels and higher density of front-end circuitry is required. Since neural signals such as action potential (AP) have wider signal bandwidth than that of an image sensor, a data compression technique is essentially required for arrayed neural recording systems. In this paper, compressed sensing (CS) is employed for data reduction, and a novel time-domain analog CS encoder is proposed. A simpler and lower power circuit than conventional analog or digital CS encoders can be realized by using the proposed CS encoder. A prototype of the proposed encoder was fabricated in a 180 nm 1P6M CMOS process, and it achieved an active area of 0.0342 and an energy efficiency of 25.0