The road pavement conditions affect safety and comfort, traffic and travel times, vehicles operating cost, and emission levels. In order to optimize the road pavement management and guarantee satisfactory mobility conditions for all road users, the Pavement Management System (PMS) is an effective tool for the road manager. An effective PMS requires the availability of pavement distress data, the possibility of data maintenance and updating, in order to evaluate the best maintenance program. In the last decade, many researches have been focused on pavement distress detection, using a huge variety of technological solutions for both data collection and information extraction and qualification. This paper presents a literature review of data collection systems and processing approach aimed at the pavement condition evaluation. Both commercial solutions and research approaches have been included. The main goal is to draw a framework of the actual existing solutions, considering them from a different point of view in order to identify the most suitable for further research and technical improvement, while also considering the automated and semi-automated emerging technologies. An important attempt is to evaluate the aptness of the data collection and extraction to the type of distress, considering the distress detection, classification, and quantification phases of the procedure.

The unmanned aerial vehicle (UAV) photogrammetric survey of an archaeological site has proved itself to be particularly efficient. In order to obtain highly accurate and reliable results, it is necessary to design carefully the flight plan and the geo-referencing, while also evaluating the indicators of the accuracy rate. Using as a test case a UAV photogrammetric survey conducted on the archaeological site of the Roman Amphitheatre of Avella (Italy), in this paper, we propose a pipeline to assess the accuracy of the results according to some quality indicators. The flight configuration and the georeferencing chosen is then be checked via the residuals on the ground control points (GCPs), evenly distributed on the edges and over the entire area. With the aim of appraising the accuracy of the final model, we will suggest a method for the outlier detection, taking into account the statistical distribution (both global and of portion of the study object) of the reprojection errors. A filter to reduce the noise within the model will then be implemented through the detection of the angle formed by homologous rays, in order to reach a compromise between the number of the usable points and the reduction of the noise linked to the definition of the 3D model.

Many studies on the semantic segmentation of cracks using the machine learning (ML) technique can be found in the relevant literature. To date, the results obtained are quite good, but often the accuracy of the trained model and the results obtained are evaluated using traditional metrics only, and in most cases, the goal is to detect only the occurrence of cracks. Particular attention should be paid to the thickness of the segmented crack since, in road pavement maintenance, the width of the crack is the main parameter and is the one that characterizes the severity levels. The aim of our study is to optimize the crack segmentation process through the implementation of a modified U-Net model-based algorithm. For this, the Crack500 dataset is used, and then the results are compared with those obtained from the U-Net algorithm, which is currently found to be the most accurate and performant in the literature. The results are promising and accurate, as the findings on the shape and width of the segmented cracks are very close to reality.

The surface conditions of road pavements, including the occurrence and severity of distresses present on the surface, are an important indicator of pavement performance. Periodic monitoring and condition assessment is an essential requirement for the safety of vehicles moving on that road and the wellbeing of people. The traditional characterization of the different types of distress often involves complex activities, sometimes inefficient and risky, as they interfere with road traffic. The mobile laser systems (MLS) are now widely used to acquire detailed information about the road surface in terms of a three-dimensional point cloud. Despite its increasing use, there are still no standards for the acquisition and processing of the data collected. The aim of our work was to develop a procedure for processing the data acquired by MLS, in order to identify the localized degradations that mostly affect safety. We have studied the data flow and implemented several processing algorithms to identify and quantify a few types of distresses, namely potholes and swells/shoves, starting from very dense point clouds. We have implemented data processing in four steps: (i) editing of the point cloud to extract only the points belonging to the road surface, (ii) determination of the road roughness as deviation in height of every single point of the cloud with respect to the modeled road surface, (iii) segmentation of the distress (iv) computation of the main geometric parameters of the distress in order to classify it by severity levels. The results obtained by the proposed methodology are promising. The procedures implemented have made it possible to correctly segmented and identify the types of distress to be analyzed, in accordance with the on-site inspections. The tests carried out have shown that the choice of the values of some parameters to give as input to the software is not trivial: the choice of some of them is based on considerations related to the nature of the data, for others, it derives from the distress to be segmented. Due to the different possible configurations of the various distresses it is better to choose these parameters according to the boundary conditions and not to impose default values. The test involved a 100-m long urban road segment, the surface of which was measured with an MLS installed on a vehicle that traveled the road at 10 km/h.

The assessment of the road roughness conditions plays an important role to ensure the required performances related to road safety and ride comfort, furthermore providing a tool for pavement maintenance and rehabilitation planning. In this work, the authors compared the roughness index (International Roughness Index, IRI) derived from high speed inertial profilometer with two other roughness indices, one dynamic and one geometric computed on a digital elevation model (DEM) built by using mobile laser scanner (MLS) data. The MLS data were acquired on an extra-urban road section and interpolated on the nodes of a DEM with a curvilinear abscissa, coinciding with the global navigation satellite system (GNSS) track of the profilometer. To estimate the grid cell elevation, we applied two interpolation methods, ordinary kriging (OK) and inverse distance weighting (IDW), over the same data. The roughness values computed on the surface of the DEM showed a similar trend and a high correlation with those acquired by the profilometer, higher for the dynamic index than for the geometric index. The differences between the IRI values by profilometer and those computed on the DEM were small enough not to significantly affect the judgments on the analyzed sections. Moreover, the road sub-sections derived from profilometer measure that were classified as critical coincided with those derived from light detection and ranging (LiDAR) surveys. The proposed method can be used to perform a network-level analysis. In addition, to evaluate the effects of vibrations on human comfort, we input the DEMs into a dynamic simulation software in order to compute the vertical accelerations, as specified in the UNI ISO 2631 standard. The values obtained were in line and correlated with those inferred from the standard methodology for profilometer measures.

The road pavement condition affects safety and comfort, traffic and travel times, vehicles operating cost and emission levels. In order to optimize the road pavement management and guarantee satisfactory mobility conditions for all the road users, the Pavement Management System (PMS) is an effective tool for the road manager. An effective PMS requires the availability of pavement distress data, the possibility of data maintenance and updating, in order to evaluate the best maintenance program. In the last decade, many researches have been focused on pavement distress detection, using a huge variety of technological solutions for both data collection and information extraction and qualification. This paper presents a literature review of data collection systems and processing approach aimed at the pavement condition evaluation. Both commercial solutions and research approaches have been included. The main goal is to draw a framework of the actual existing solutions, considering them from a different point of view in order to identify the most suitable for further research and technical improvement, also considering the automated and semi-automated emerging technologies. An important attempt is to evaluate the aptness of the data collection and extraction to the type of distress, considering the distress detection, classification and quantification phases of the procedure.