The present study reports the upcycling process of waste plastics into value-added product graphene nanosheets (GNs) and their subsequent applications in dye sensitized solar cells (DSSCs) and supercapacitors. Bentonite nanoclay has been used as an agent for the degradation of waste plastics with two step pyrolysis processes at 450 °C and 945 °C in an inert atmosphere of N2 gas to obtain GNs. The GNs with few layers were confirmed by the RAMAN spectroscopy, XRD and HRTEM analyses. Further, FT-IR and EDX analyses also performed for the identification and quantitative analysis of functional groups in GNs. The GNs thus synthesized from plastic waste have been used for the fabrication of DSSCs and supercapacitors. The DSSC fabrication with GNs as part of photo-anode with polymeric electrolyte showed a high fill factor of 86.4% and high Voc of 0.77 V, which were also supported by the computational findings. On the other hand, the utilization of GNs as an active layer material of supercapacitor electrodes offered a high specific capacitance of 398 F/g with a scan rate of 0.005 V/s. The supercapacitor also exhibited significant energy density (Ed) and power density (Pd) of 38 Wh/kg and 1009.74 W/kg, respectively. Thus, the process illustrated the utility of waste plastics upcycling for conservation of EEE i.e., ecology, economy and energy for better tomorrow.
Presently, plastic waste management is an urgent issue around the globe that is not easy to resolve. We have made an attempt to resolve this issue by synthesizing graphene nanosheets (GNs), which are later exploited for supercapacitor applications. Herein, we report a multidimensional remediation approach for the mass scale production of GNs from plastic waste using zinc oxide (ZnO) and montmorillonite (MMT) clay as the catalysts and templates. Subsequently, supercapacitor (SC) cells are fabricated from the GNs synthesized using ZnO and MMT, and show good electrochemical performance with specific capacitances of 72.8 F g−1 and 377.4 F g−1, respectively. In addition, the GNs synthesized using MMT showed the highest energy and power densities of 21.1 W h kg−1 and 1010.0 W kg−1, respectively. Essentially, the use of MMT is able to mainly generate GNs with up to ∼2 layers from waste plastics; these GNs are more regular with less defects, which helps in enhancing the electrochemical performance of the cell. Thus, our study revealed that the choice of catalyst and template in a given GNs manufacturing process can alter the morphology and quality of the GNs, which ultimately affects their electrochemical performance in SC cells. We hope that this study can serve as a crucial breakthrough to deal with global threats such as plastic waste pollution and provide an economical option for the fulfilment of global energy demands.
1 November 2019 in Materials Science and Engineering: C
Given the non-biodegradable nature of plastic, its recycling and upcycling are critical to ensure effective waste management and resource conservation, with a cradle-to-cradle approach. Herewith, we report a low-effort and nature-friendly upcycling route for plastic waste to manufacture large quantities of graphene nanosheets (GNs) via a two-stage pyrolysis process. To analyze the utility of GNs synthesized by this process, their supercapacitive behavior was studied over different current collectors such as copper tape (CuT), indium tin oxide glass (ITO), graphite sheet (GS), and aluminum sheet (AlS) in PVA-H3PO4 gel electrolyte. Our findings confirm that the AlS current collector displayed superiority and demonstrated the highest specific capacitance of 38.78 F/g with the plastic waste GNs. Thus, the present study shows a cost-effective and sustainable option for propelling a circular economy through waste plastic upcycling with energy storage applications.
The demand for energy and energy storage devices is the urgent need of our society due to heavy dependence on electric appliances. Hence, the demand of graphene-like smart materials has grown tremendously in the past years. Herein, we investigated the binder-free graphene allies named reduced graphene oxide (rGO) as electrode materials for the supercapacitor after the reduction of graphene oxide by sinking and leaving process. The rGO-based devices show the areal specific capacitance of 80.2 and 7.89 mF cm−2 with aqueous 1M phosphoric acid (H3PO4) and poly (vinyl alcohol)-H3PO4 polymer gel electrolytes, respectively, over the graphite sheet.