Zhuohui Zhou

Dr. Zhuohui Zhou

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2024 in Materials
Verified
Journal Article
Open access
PDF file
ZZZhuohui Zhou
Zhuohui Zhou
YLYang Liu
Yang Liu
XCXi Chen
Xi Chen
ZWZhiyong Wang
Zhiyong Wang
Yan ZhaoYan Zhao
Yan Zhao
In this paper, the glass-fiber-fabric-reinforced resin-based absorbing composites were prepared, and their microwave-absorbing properties were studied via simulation and experiment. The simulation results show that the absorption bandwidth of the absorbing material can cover the X\C\S band, respectively, at different thicknesses. The minimum reflection loss (RL) of the composite with a thickness of 2.2 mm is −27.4 dB at 5.95 GHz. However, the experiment results are quite different from those of the simulation. The metallographic results indicate that it is the change of the mass fraction of the absorbents in the composites after curing that causes the difference. According to the metallographic results, three shape approximation methods were proposed to calculate the real mass ratio of the absorbents in the composites, namely, parallelogram approximation, bows approximation, and elliptical approximation. Meanwhile, the structural parameter Kf was introduced to optimize the calculation results. The electromagnetic parameters of the material based on the calculation results were measured, and the results show that the simulation results obtained via bow approximation have a better coincidence to the experiment results, and the mass ratio of the absorbent raises by around 9.95%, which lays a foundation for the subsequent design of microwave-absorbing composites.

25 February 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MZMengyu Zhou
Mengyu Zhou
ZZZhuohui Zhou
Zhuohui Zhou
HCHongfei Cheng
Hongfei Cheng
Magnetic metals are of considerable importance for stealth technology and electromagnetic pollution control. However, they suffer from inherent limitations, such as the Snoek limit and narrow absorption bandwidth, which restrict their applications in complex scenarios. To address these challenges, this review systematically summarizes the recent advances of magnetic metal-based microwave-absorbing materials (MAMs), focusing on four core directions: alloy design, composite engineering, structural regulation, and preparation technology. The intensity and frequency bands of absorption in alloys are dictated by the material’s composition as well as its structural attributes. Moreover, composite systems incorporating carbon materials, MXenes, oxides, ceramics, and conductive polymers are discussed, where the synergistic design of components optimizes impedance matching and loss mechanisms. Key structural design strategies include core-shell structures, interface engineering, self-assembled hierarchical structures, and macroscopic structural design. These structures achieve the synergistic improvement of thin, lightweight, broadband, and strong absorption performance by enhancing interface polarization, multiple scattering, and resonance effects, while endowing materials with excellent environmental stability. Notably, metamaterial-based designs can further achieve an ultrawide bandwidth spanning 0.3–18 GHz. Additionally, preparation processes are crucial for regulating the microstructure and activating loss mechanisms. This review aims to offer theoretical and practical insights for developing high-performance, multifunctional magnetic MAMs.

2 September 2023 in Journal of Magnetism and Magnetic Materials
Verified
Journal Article
Open access
ZZZhuohui Zhou
Zhuohui Zhou
YZYan Zhao
Yan Zhao
ZWZhiyong Wang
Zhiyong Wang
HCHongfei Cheng
Hongfei Cheng

4 March 2024 in Composites Part C: Open Access
Verified
Journal Article
Open access
ZZZhuohui Zhou
Zhuohui Zhou
YWYanli Wang
Yanli Wang
WZWanqi Zhao
Wanqi Zhao
ZWZhiyong Wang
Zhiyong Wang
YZYan Zhao
Yan Zhao

12 June 2026 in Materials
Verified
Journal Article
Open access
PDF file
ZZZhuohui Zhou
Zhuohui Zhou
MZMengyu Zhou
Mengyu Zhou
ZWZhiyong Wang
Zhiyong Wang
Yan ZhaoYan Zhao
Yan Zhao
In this study, Fe70Ni30 metal was deposited onto continuous glass fiber composites via magnetron sputtering, followed by surface coating with SiO2. The effects of key process parameters-including Fe70Ni30 sputtering duration (2, 5, 10, 20, and 30 min) and SiO2 surface coating-on the electromagnetic properties and microwave absorption performance of the materials were systematically investigated. Scanning electron microscopy (SEM) characterization revealed that as sputtering time increased, the metal coating evolved from discrete small particles into a continuous film. Cross-sectional SEM analysis further demonstrated the formation of a bilayer structure after SiO2 introduction. X-ray diffraction (XRD) patterns confirmed the presence of diffraction peaks corresponding to the Fe70Ni30 alloy solid solution. Electromagnetic parameter measurements indicated that the influence of sputtering time on electromagnetic properties was primarily pronounced during the metal layer growth stage; once a continuous film was formed, the variation in electromagnetic parameters diminished. Concurrently, the SiO2 coating exhibited a significant regulatory effect on dielectric parameters. Reflection coefficient calculations showed that the optimal absorption thickness for the single-layer material ranged from 2.5 to 3.0 mm, with the absorption peak shifting toward lower frequencies as thickness increased. However, the effective absorption bandwidth (EAB) was only 3–5 GHz, failing to meet wideband requirements. In contrast, the three-layer composite structure (total thickness: 3.8 mm) optimized via genetic algorithm achieved impedance gradient and loss synergy, expanding the EBW (R < −10 dB) from 4.8 GHz (single layer) to 10 GHz (8–18.0 GHz)-a substantial improvement over the single-layer configuration. This work provides experimental evidence and technical support for the structural design and process optimization of lightweight, high-efficiency, wideband microwave-absorbing materials.

14 August 2026 in Polymers
Verified
Journal Article
Open access
PDF file
ZZZhuohui Zhou
Zhuohui Zhou
YWYanli Wang
Yanli Wang
MZMengyu Zhou
Mengyu Zhou
ZWZhiyong Wang
Zhiyong Wang
Yan ZhaoYan Zhao
Yan Zhao
This study focuses on the deposition of nickel thin-films onto glass fiber fabric via DC magnetron sputtering and explores their potential for broadband microwave absorption applications. A total of twelve laminate samples were prepared by integrating the coated fabrics with epoxy resin, with sputtering powers ranging from 0.5 to 2 kW and deposition times ranging from 10 to 90 min. The microstructure, surface resistance, electromagnetic parameters, and microwave absorption performance were systematically characterized using SEM, XRD, four-point probe measurements, and vector network analysis, supplemented by the Lorentz model fitting and simulation validation. The results indicate that the nickel coatings exhibit a non-uniform arc-like morphology, with preferential growth along the (111) crystallographic plane, while the (200) and (220) planes form under specific conditions. The surface resistance reaches up to 108 Ω·m, suggesting the absence of a continuous conductive network. Electromagnetic parameter analysis reveals that the laminates display dielectric-loss-dominated microwave absorption, and the Lorentz fitting identifies double resonance peaks under prolonged or high-power sputtering. The addition of a dielectric matching layer further enhances the absorption performance. All samples achieve wideband absorption within the Ku-band. Notably, the samples prepared at 1 kW for 30 min and at 1 kW for 90 min both exhibit a reflectivity of ≤−10 dB across the entire 8–18 GHz frequency range. The experimental results are in good agreement with simulations. The bulk density of the laminates is approximately 1.8 g/cm3. These findings confirm that magnetron-sputtered nickel-coated continuous glass fiber fabrics hold considerable promise for wideband microwave absorption applications.