To characterize the combustion properties of solid propellants, the synchronized measurement method of burning rate and combustion temperature is proposed combined shadow imaging and radiation imaging. Using spectroscopic and filtering imaging, shadow and radiation images of a solid propellant specimen are obtained synchronously. Burning rate is calculated by burning surface movement velocity of shadow images, and combustion temperature is calculated by radiation image thermometry. Measurement accuracies of burning rate and combustion temperature of the solid propellant specimen are validated by other independent measurement methods. On this basis, the synchronized measurements of burning rate and combustion temperature of different formulations of solid propellant specimens under different working conditions are carried out. The results show that the influence on burning rate and combustion temperature of pressure and formulas is different. Therefore, the synchronized measurement of burning rate and combustion temperature can provide more direct data support for the evaluation of solid propellant combustion performance.
To measure the combustion parameters of a solid propellant, this Letter researches the fitting method for flame temperature and emissivity based on multispectral images and proposes the particle swarm optimization–K-means (PSO–K-means) clustering optimization algorithm of a flame multispectral image. Considering the difference in flame radiation characteristics in different regions, the flame multispectral image is clustered, and spectra in different regions are analyzed and selected in different fitting bands to inverse temperature and emissivity. On this basis, the method is applied to measure solid propellant combustion parameters with different formulations. The measurement shows that the flame temperature is between 1700 and 2100 K, and the emissivity is concentrated in 0.1–0.5. Compared with temperature measurements obtained from tungsten–rhenium thermocouples, the relative deviation of multispectral imaging thermometry is less than 5%. The distribution characteristics of solid propellant combustion parameters with different formulations were analyzed, which provided important data support for evaluating combustion conditions and optimizing solid propellant formulations.
The short-term prediction of single well production can provide direct data support for timely guiding the optimization and adjustment of oil well production parameters and studying and judging oil well production conditions. In view of the coupling effect of complex factors on the daily output of a single well, a short-term prediction method based on a multi-agent hybrid model is proposed, and a short-term prediction process of single well output is constructed. First, CEEMDAN method is used to decompose and reconstruct the original data set, and the sliding window method is used to compose the data set with the obtained components. Features of components by decomposition are described as feature vectors based on values of fuzzy entropy and autocorrelation coefficient, through which those components are divided into two groups using cluster algorithm for prediction with two sub models. Optimized online sequential extreme learning machine and the deep learning model based on encoder-decoder structure using self-attention are developed as sub models to predict the grouped data, and the final predicted production comes from the sum of prediction values by sub models. The validity of this method for short-term production prediction of single well daily oil production is verified. The statistical value of data deviation and statistical test methods are introduced as the basis for comparative evaluation, and comparative models are used as the reference model to evaluate the prediction effect of the above multi-agent hybrid model. Results indicated that the proposed hybrid model has performed better with MAE value of 0.0935, 0.0694 and 0.0593 in three cases, respectively. By comparison, the short-term prediction method of single well production based on multi-agent hybrid model has considerably improved the statistical value of prediction deviation of selected oil well data in different periods. Through statistical test, the multi-agent hybrid model is superior to the comparative models. Therefore, the short-term prediction method of single well production based on a multi-agent hybrid model can effectively optimize oilfield production parameters and study and judge oil well production conditions.
Considering the inability of ultrasonic methods to effectively measure gas velocity in gas-liquid two-phase flow, as ultrasonic waves cannot penetrate the gas phase, this paper proposes a gas-liquid two-phase flow measurement method based on the phase-isolation and dual fluid model. Before measurements, the phase-isolation technique is employed to convert the inlet flow pattern into a swirling annular flow pattern. Two typical inlet flow patterns, bubbly flow and slug flow, are selected to investigate how flow fluctuation under different conditions affects ultrasonic measurements. The liquid film thickness is initially determined using ultrasonic reflection, followed by liquid film velocity measurement with the method of ultrasonic Doppler. Finally, gas velocity is obtained by combining ultrasonic cross correlation velocity and the dual fluid model. The results show that the liquid film thickness of swirling annular flow exhibits an exponential trend under the inlet pattern of slug flow as the superficial liquid velocity varies. For liquid velocity measurements, the relative errors for the inlet flow patterns of bubbly flow and slug flow are respectively within ±6% and ±8%. For gas velocity measurements, the relative errors for the inlet flow patterns of bubbly flow and slug flow are within ±7% and ±12%, respectively.