Path planning is an important part of the navigation control system of mobile robots since it plays a decisive role in whether mobile robots can realize autonomy and intelligence. The particle swarm algorithm can effectively solve the path-planning problem of a mobile robot, but the traditional particle swarm algorithm has the problems of a too-long path, poor global search ability, and local development ability. Moreover, the existence of obstacles makes the actual environment more complex, thus putting forward more stringent requirements on the environmental adaptation ability, path-planning accuracy, and path-planning efficiency of mobile robots. In this study, an artificial potential field-based particle swarm algorithm (apfrPSO) was proposed. First, the method generates robot planning paths by adjusting the inertia weight parameter and ranking the position vector of particles (rPSO), and second, the artificial potential field method is introduced. Through comparative numerical experiments with other state-of-the-art algorithms, the results show that the algorithm proposed was very competitive.
Microwave nondestructive testing (NDT) offers promising application prospects due to its advantages of non-contact inspection in detecting defects in non-metallic composites. However, the detection sensitivity of this technology is generally affected by the lift-off effect. To reduce this effect and highly concentrate electromagnetic fields on defects, a defect detection method using scanning instead of moving sensors in the microwave frequency range was proposed. Additionally, a novel sensor based on the programmable spoof surface plasmon polaritons (SSPPs) was designed for non-destructive detection in non-metallic composites. The unit structure of the sensor was made up of a metallic strip and a split ring resonator (SRR). A varactor diode was loaded between the inner and outer rings of the SRR, and by changing the capacitance of this diode using electronic scanning, the field concentration phenomenon of the SSPPs sensor can be moved along a specific direction for defect detection. By using this proposed method and sensor, the location of a defect can be analyzed without moving the sensor. The experimental results demonstrated that the proposed method and designed SSPPs sensor can be effectively applied in detecting defects in non-metallic materials.
To solve the problem of joint calibration in multi-sensor information fusion, a joint calibration technique based on three-dimensional lidar point cloud data and two-dimensional gray image data is proposed. Firstly, by extracting the corner information of the gray image data, the two-dimensional coordinates of the corner were obtained, and the calibration of the monocular camera was completed by using the corner information, and its internal and external parameters were obtained. Then, by extracting the corner information of the point cloud data obtained by lidar, the corresponding corner points are matched. Finally, the rotation and translation matrix from lidar coordinate system to image coordinate system is generated to realize the joint calibration of lidar and camera.