Polyetherimide (PEI) is a kind of high-performance polymer, which possesses a high glass transition temperature ( Tg), excellent flame retardancy, low smoke generation, and good mechanical properties. In this article, PEI was applied in the fused deposition modeling (FDM)–based 3-D printing for the first time. The entire process from filament extrusion to printing was studied. It was observed that the filament orientation and nozzle temperature were closely related to the mechanical properties of printed samples. When the nozzle temperature is 370°C, the mean tensile strength of FDM printing parts can reach to 104 MPa, which is only 7% lower than that of injection molded parts. It can be seen that the 0° orientation set of samples show the highest storage modulus (2492 MPa) followed by the 45° samples, and the 90° orientation set of samples show the minimum storage modulus (1420 MPa) at room temperature. The above results indicated that this technique allows the production of parts with adequate mechanical performance, which does not need to be restricted to the production of mock-ups and prototypes. Our work broke the limitations of traditional FDM technology and expanded the types of material available for FDM to the high-temperature engineering plastics.
Integrating heterogeneous interface through nanostructure design and interfacial modification is essential to realize strengthened interfacial polarization relaxation in electromagnetic wave absorption. However, an in-depth comprehension of the interfacial polarization behavior at hetero-junction/interface is highly desired but remains a great challenge. Herein, a Mott—Schottky heterojunction consisting of honeycomb-like porous N-doped carbon confined CoP nanoparticles (CoP@HNC) is designed to elevate the interfacial polarization strength. Simultaneously, corresponding electron migration and redistribution between the heterointerface of defective carbon and CoP nanoparticles are revealed. The significant difference in the work function on both sides of heterogeneous interface boosts the interfacial polarization in high frequency region. Furthermore, the relevant spectroscopic characterizations demonstrate that electron spontaneously migrates from CoP to N-doped carbon at the heterointerface, thereby contributing to the accumulation of electron on defective carbon side and the distribution of hole on CoP side. Impressively, benefitting from the synergistic effects of three-dimensional porous conductive carbon skeleton, foreign N heteroatoms, special CoP nanoparticles, and the resultant CoP/N-doped carbon Mott—Schottky heterojunction, the CoP@HNC exhibits remarkable electromagnetic wave absorption performances with minimum reflection loss up to −60.8 dB and the maximum effective absorption bandwidth of 4.96 GHz, which is superior to most of recently reported transition metal phosphides microwave absorbing composites. The present work opens a new avenue for designing heterogeneous interface to realize strengthened microwave absorption capability and also reveals the in-depth influence of interface structure on electromagnetic wave absorption.
1 February 2025 in International Journal of Minerals, Metallurgy and Materials