Fundamental repetition rates of 3.1 GHz, 7.0 GHz, and 12.5 GHz in passively modelocked Yb-doped fiber lasers are demonstrated. To the best of our knowledge, the fundamental repetition rate of 12.5 GHz is the highest value for 1.0 μm mode-locked fiber lasers. The mode-locked oscillator has a peak wavelength of 1047.5 nm and a pulse duration of 1.9 ps. The repetition rate signal has a signal-to-noise ratio of 57 dB. The peak wavelength of mode-locked spectra gradually makes a blue-shift and the modelocked threshold power increases with an increase in pulse repetition rate. Furthermore, in contrast to most of the all-normal-dispersion mode-locked fiber lasers, the present linear resonator (e.g., length < 1 cm) allows the buildup of gain-guided soliton without any filter effect. To unveil the underlying pulse shaping mechanism, a combined model comprising dynamic rate equations and the generalized nonlinear Schrödinger equation is established. Surprisingly, an essential gain filtering effect, which is contributed by a 26-nm gain bandwidth, is revealed and can verify the gain-guided pulse dynamics. Moreover, the pulse build-up in temporal and frequency domain, like spectral evolution and gain bandwidths, is numerically carried out in detail.
We report on the pulse instability in GHz repetition-rate thulium-doped fiber laser from the numerical perspective, hinging on a combined physical model that incorporates rate equations of rare-earth ion energy levels and nonlinear Schrodinger equation. In terms of this more explicit model, we predict two pulsating regimes, i.e. gain- and soliton-induced pulsations. Further, the study also reveals a novel type of pulse instability in a continuous wave mode locking (CWML) regime, in which the pulse-intensity fluctuates as well as a notable pedestal of radio-frequency spectrum arises. The proposed modeling can be universally applied, and the numerical results are able to offer reliable guidance to design high repetition rate mode-locked fiber lasers.
Optical resonant cavities of the mode-locked fiber lasers have been intuitively assumed to be on the order of several or tens of meters because the nonlinear phase accumulation produced by long optical fibers is essential for pulse-shaping. However, for optical cavities smaller than 10 cm, ultrafast lasers can yield pulse trains with fundamental repetition rates reaching several gigahertz, affecting the pulse-shaping mechanism. For instance, Yb3+-doped fiber lasers with cavities <10 cm operate in the gain-guided soliton regime, which is unstable in the long-term operation and exhibits picosecond-duration pulses. Here, dissipative solitons (DSs) in centimeter-scale fiber lasers are demonstrated, and a general method for constructing DSs in small-length fiber lasers is presented. The long-term stability (assessed in terms of optical spectra) improved, owing to the dissipative system-mediated pulse stabilization with respect to perturbations. The intensity profile atop the spectrum was considerably flat, and measured maximal spectral width was 9.6 nm for a DS all-fiber laser with a 3.0 cm resonant cavity. In the temporal domain, the directly extracted pulse duration was 266 fs. In addition, the evolution of spectral broadening was consistent with the DS solution of a normal-dispersion dissipative system using a generalized nonlinear Schrödinger equation and rate equation.
We demonstrate an all-polarization-maintaining (PM) passively mode-locked -doped fiber laser (YDFL) with a fundamental repetition rate of 1.3 GHz. The optical spectra of a linearly polarized soliton exhibit different shapes by rotating the fast axis of the fiber optical pigtail of a dispersive dielectric mirror. The oscillator provides a series of laser performance, such as a threshold pump power for continuous wave laser oscillation of 3.1 mW, an optical-to-optical efficiency for mode-locking of 29%, and an integrated relative intensity noise of 0.08%. To the best of our knowledge, this is the first report of ultrafast all-fiber YDFL with PM architecture.
A Q‐switched all‐fiber Er‐doped laser operated at a wavelength up to 1625 nm is proposed and demonstrated. A self‐developed, element hybridization (Al, Ge, La, P, and Er in the core, Si and P in the cladding region) glass fiber with gain extended to U‐band is employed as gain medium. The compact laser cavity contains a fiber Bragg grating which was manufactured by means of point‐by‐point femtosecond laser inscription technique. Stable Q‐switched laser pulse train is successfully achieved using a semiconductor saturable absorber mirror at a low pump threshold of 29 mW. The laser has a maximum single pulse energy of 746 nJ and a minimum pulse duration of 26.8 μs. The pulse repetition rate can be gradually tuned from 6.47 to 11.87 kHz by increasing the pump power. In particular, the laser wavelength of the Q‐switched all‐fiber laser can be as long as 1625 nm. This is, to the best of our knowledge, the longest wavelength for the Q‐switched Er‐doped fiber lasers at this waveband.