Stormwater runoff from highways is a source of pollution to surface water bodies and groundwater. Excess loadings of phosphorus in stormwater discharged to surface water bodies can result in eutrophication. Treatment of stormwater for phosphorus is necessary in order to sustain ecological and economical benefits related to aquatic resources. If phosphorus is removed, the water can be sustained for other uses, such as irrigation and industrial applications. The data presented in this paper is used to evaluate the treatment performance of a roadside biosorption activated media system with regards to the removal of total phosphorus and soluble reactive phosphorus from highway runoff. The evaluation also compares removal efficiencies and effluent concentrations using biosorption activated media (BAM) to that with sandy soil commonly found in the Florida area. The results presented in this paper indicate that BAM bio-filtration systems are a feasible treatment method for removing phosphorus from highway runoff. A discussion concerning the additional treatment and reuse of water by harvesting, as part of a Bio-filtration & Harvesting Swale System, is also presented in the paper.
Green roofs, which have been used for several decades in many parts of the world, offer a unique and sustainable approach to stormwater management. Within this paper, evidence is presented on water retention for an irrigated green roof system. The presented green roof design results in a water retention volume on site. A first principle mass balance computer model is introduced to assist with the design of these green roof systems which incorporate a cistern to capture and reuse runoff waters for irrigation of the green roof. The model is used to estimate yearly stormwater retention volume for different cistern storage volumes. Additionally, the Blaney and Criddle equation is evaluated for estimation of monthly evapotranspiration rates for irrigated systems and incorporated into the model. This is done so evapotranspiration rates can be calculated for regions where historical data does not exist, allowing the model to be used anywhere historical weather data are available. This model is developed and discussed within this paper as well as compared to experimental results.
1 December 2021 in Journal of Environmental Management
Storm-water harvesting from a pond for irrigation of adjacent lands is promoted as one way that may reduce pond discharge while supplementing valuable potable water used for irrigation. Reduction of pond discharge reduces the mass of pollutants in the discharge. In this study, a storm water harvesting and assessment for reduction of pollution (SHARP) model was developed to predict operation of a wet pond used for storm-water harvesting at Miramar Lakes, Miramar, FL. The model integrates the interaction of surface water and groundwater in a catchment area. The SHARP model was calibrated and validated for pond-water elevation. Model evaluation showed adequate prediction of pond-water elevation with root mean square error (RMSE) between 0.07 and 0.12 m, mean absolute error (MAE) between 0.018 and 0.07 m, and relative index of agreement () between 0.74 and 0.98 for both calibration and validation periods. The SHARP model is capable of assessing harvest safe yield and discharge from a pond, including the prediction of the percentage of runoff into a harvesting pond that is not discharged.