The advance of laser-driven neutron sources (LDNSs) has enabled neutron resonance spectroscopy to be performed with a single shot of a laser. In this study, we describe a detection system of epithermal (∼eV) neutrons especially designed for neutron resonance spectroscopy. A time-gated photomultiplier tube (PMT) with a high cut-off ratio was introduced for epithermal neutron detection in a high-power laser experiment at the Institute of Laser Engineering, Osaka University. We successfully reduced the PMT response to the intense hard X-ray generated as a result of the interaction between laser light and the target material. A time-gated circuit was designed to turn off the response of the PMT during the laser pulse and resume recording the signal when neutrons arrive. The time-gated PMT was coupled with a 6Li glass scintillator, serving as a time-of-flight (TOF) detector to measure the neutron resonance absorption values of 182W and 109Ag in a laser-driven epithermal neutron generation experiment. The neutron resonance peaks at eV of 182W and eV of 109Ag were detected after a single pulse of laser at a distance of 1.07 m.
Generation of quasi-monoenergetic ions by intense laser is one of long-standing goals in laser-plasma physics. However, existing laser-driven ion acceleration schemes often produce broad energy spectra and limited control over ion species. Here we propose the acceleration mechanism, boosted Coulomb explosion, initiated by a standing wave, which is formed in a pre-expanded plasma by the interference between a continuously incoming main laser pulse and the pulse reflected by a solid target, where the pre-expanded plasma is formed from a thin layer on the solid target by a relatively strong pre-pulse. This mechanism produces a persistent Coulomb field on the target front side with field strengths on the order of TV/m for picoseconds. We experimentally demonstrate generation of quasi-monoenergetic deuterons up to 50 MeV using an in-situ D 2 O-deposited target. Our results show that the peak energy can be tuned by the laser pulse duration.
Generation of quasi-monoenergetic ion pulse by laser-driven acceleration is one of the hot topics in laser plasma physics. In this study, we present a new method for the in situ deposition of an ultra-thin D2O layer on the surface of an aluminum foil target utilizing a spherical D2O capsule. Employing a 1019 W/cm2 laser, we achieve the acceleration of 10.8 MeV deuterons with an energy spread of ΔE/E = 4.6% in the most favorable shot. The energy spread depends on the exposure time of the D2O capsule in the vacuum chamber. This method has the potential to extend its applicability to other ion species.
1 April 2024 in Japanese Journal of Applied Physics
In recent years, laser-driven neutron sources have attracted attention for their applications such as nondestructive analysis and the production of medical radioisotopes. One of the efficient neutron production methods is the use of the 9Be(d, n)10B reaction on a beryllium target with deuterons accelerated by laser–plasma interactions, since this is an exothermic reaction. For efficient deuteron acceleration, we have developed a formation system for solid deuterium targets. A millimeter thick solid deuterium target can be formed with the system. Before the laser shot, the solid deuterium target in the laser chamber can be mechanically moved to the laser irradiation point. We have demonstrated deuteron acceleration by the LFEX laser, and a highly pure deuteron pulse with energies of up to 6.2 MeV was measured with a Thomson parabola ion spectrometer.
Recent progress of laser science provides laser-driven neutron source (LDNS), which has remarkable features such as the short pulse width. One of the key techniques to be developed for more efficient use of the LDNS is neutron collimation tubes to increase the number of neutrons arriving at a detector in the time-of-flight method. However, when a tube with a thick wall is used as a collimator the neutron collection efficiency at the detector increases but the time resolution becomes wider because of multiple scattering inside of the tube. In the present study, we have developed a collimation tube made of Ni-0, which is optimized for the increased neutron collection efficiency and a reasonable time resolution. This collimator has been demonstrated experimentally using neutron resonance spectroscopy with neutrons provided from LFEX laser.