To improve the thermal stability of lithium- and sodium-ion batteries, the room-temperature molten salts /1-ethyl-3-methyl imidazolium tetrafluoroborate and were used as ionic liquid (IL) electrolytes instead of flammable carbonate-type organic electrolyte solvents. To avoid cathodic decomposition of the IL electrolytes, a symmetric cell configuration with Na Superionic CONductor (NASICON)-type (where A is Li or Na) as both cathode and anode was tried in a coin-type cell (type 2320). As a result, both the polyanionic-based (LVP) as well as (NVP) symmetric cells using organic electrolytes were found to operate as secondary batteries and exhibited satisfactory electrochemical performances. The substitution of the organic electrolytes by the appropriate IL electrolytes in both cases resulted in the reduction in the first discharge capacities. However, the IL-based cells revealed better cyclability and a more stable behavior at elevated temperatures. The obtained electrochemical behavior of the symmetric cells was confirmed by the complex impedance measurements at 25 and . In addition, the thermal stability of LVP and NVP with the IL electrolytes was also examined.
Due to their highly reversible capacity, tin-sulfide-based materials have gained attention as potential anodes for sodium-ion and lithium-ion batteries. Nevertheless, the performance of tin sulfide anodes is much lower than that of tin oxide anodes. The aim of the present investigation is to improve the electrochemical performances of SnS anodes for sodium-ion batteries using conventional organic electrolytes. Three different carbon composite anodes, SnS/reduce graphene oxide (SnS/G), SnS/reduce graphene oxide/hard carbon (SnS/G + C), and SnS/hard carbon (SnS/C), were prepared by hot water bath synthesis followed by mechanical milling. The mechanism of the conversion and alloying reaction was investigated by TEM. The feasibility of SnS anodes was confirmed in a full cell configuration using Na3V2(PO4)2F3 as the cathode.