Concerning the application of high-precision, enormous rotating equipment under harsh working conditions, the advantages of dry gas sealing technology are increasingly obvious. Herein, research on the dynamic stability of dry gas seals is reviewed based upon their operating mechanisms. The influence of the dry gas seal structure, vibration response, and dynamic followability on the reliability of the shaft end sealing system of rotating machinery is the focus of current dry gas sealing technology. This work reviews the research history; analyzes the key coefficient of the instability of the sealing system under external disturbances, and the existing research on stability models; discusses the influence of starting and stopping characteristics, working conditions, and groove parameters on the stability of dry gas seals; and points out the shortcomings in the existing research. In addition, potential developments in dynamic stability are proposed, including improving model accuracy, improving experimental techniques, or applying intelligent control and optimization methods to enhance the dynamic stability of the sealing system. Finally, the development prospects for dry gas sealing technology in intelligent monitoring and wide temperature range adaptations are discussed, and theoretical guidance for improving a dry gas seal system is provided.

With the improvement of dry gas seal efficiency in high-parameter fields, the flow pattern of gas film lubrication is complicated. Based on gas lubrication theory, the Reynolds equation of compressible gas was established with a bidirectional T-groove dry gas seal as the research object. The Reynolds equation was solved to obtain a modified turbulent film pressure distribution law that affects gas lubrication. The effectiveness of the calculation program was verified by experimental tests. The results show that with an increase in operating parameters, the turbulence effect caused the gas film pressure fluctuation in the T-groove region to intensify, resulting in gas film flow instability. In addition, the inertia effect improved, which slowed down the leakage and affected the change law of stiffness and the rigid leakage ratio. When the fluid speed and gas pressure were low, the inertia effect could be ignored. When the groove depth was increased to 8 μm, the height difference between the trough and non-T-groove region became larger due to the combination of the turbulence and inertia effects. Further, when the gas film thickness was 3 μm, the opening force and gas film stiffness were high due to the dynamic pressure effect in the small film thickness groove. An increase in the gas film thickness weakened the turbulence effect and reduced the gas film pressure fluctuation.

With the application of high-precision, enormous rotating equipment and the addition of harsh working conditions, the advantages of dry gas sealing technology are increasingly obvious. Herein, research on the dynamic stability of dry gas seals is reviewed based on their operating mechanism. The influence of the dry gas seal structure, vibration response, and dynamic followability on the reliability of the shaft end sealing system of rotating machinery is the focus of current dry gas sealing technology. This work reviews the research history; analyzes the key coefficient of instability of the sealing system under external disturbances and the existing research on stability models; discusses the influence of starting and stopping characteristics, working conditions, and groove parameters on the stability of dry gas seals; and points out the shortcomings in the existing research. In addition, potential developments in dynamic stability are proposed, including improving model accuracy, improving experimental techniques, or applying intelligent control and optimization methods to enhance the dynamic stability of the sealing system. Finally, the development prospects for dry gas sealing technology in intelligent monitoring and wide temperature range adaptations are discussed, and theoretical guidance for improving the dry gas seal system is provided.

To obtain an optimal range of structural parameters for dry-gas seals with good performance, this study employed advanced sensing technology to monitor and analyze the internal flow characteristics of dry-gas seals in real time. Additionally, the validity of the calculation program was verified through experimentation. Using steady-state performance parameters as evaluation indices, a calculation model with lubrication characteristics was developed. The results indicate that when there are 12 grooves, the gas film pressure distribution is uniform and has a high value. At pressures greater than 2 MPa, the opening force, leakage, and gas film stiffness change significantly due to enhanced dynamic pressure effects with high-pressure differences, which reduces the local contact forces and frictional forces. At a constant speed, decreasing the gas film thickness increases the pressure difference while increasing both the opening force and film stiffness; however, at higher rotational speeds where the gas flow becomes non-uniform, the stability of the gas film is affected, leading to increased frictional forces. When there are between 10 and 16 grooves with depths ranging from 5.0 to 6.0 μm, dynamic pressure effects caused by pressure gradients become apparent, resulting in good dry-gas sealing performance being achieved. This research provides a theoretical reference for optimizing the design of dry-gas seals, as well as their steady-state seal performance.

In recent years, the use of dry gas seal technology in high-end industrial applications has become increasingly widespread. Existing research has primarily focused on unidirectional grooves. This study introduces an innovative approach by incorporating bidirectional grooves inspired by the biomimetic design of a carp tail, aiming to enhance sealing performance. The analysis of flow-field characteristics was conducted using Fluent software to evaluate the effect of different groove designs on sealing efficacy. The results indicate that curved grooves are more effective in directing gas flow and reducing fluid dynamic losses, thus improving the overall sealing efficiency. In particular, the outer-curved carp-tail groove exhibited superior dynamic pressure effects and reduced pressure drops across various operating conditions. The optimal radial dam-to-groove width ratio ranged from 3.8 to 4.1, and the optimal groove depth ranged from 6.5 to 9.6 μm. This investigation focused on the design and performance evaluation of biomimetic carp-tail grooves for dry gas seals, presenting a novel groove configuration for end-face sealing and further advancing the theoretical understanding of dry gas seals.