Road potholes have a well-known impact on driving quality and safety. Therefore, timely mitigation of potholes is critical for the safety of road users. However, efficient and timely maintenance relies on the presence of an effective process for pothole detection. Currently, transportation agencies primarily rely on manual inspection and road user reporting. These methods are subjective, prone to inaccuracy, and some are also laborious and time-consuming. An ideal pothole detection system would be accurate, objective, automated, and relatively inexpensive. In this context, accuracy encompasses three distinct performance areas: detection, localization, and size estimation. This study explores the potential of utilizing a mobile light detection and ranging (LiDAR) for accurate detection and size estimation, along with a global navigation satellite system (GNSS) receiver for localization, to develop an effective pothole surveillance system. To achieve this objective, the study proposes a four-step framework. Firstly, the LiDAR data are processed to generate ring-wise cross-sectional images. Secondly, a deep learning object detection network is trained to predict the presence and size of potholes. Thirdly, the ring-wise inferences are aggregated to produce a final decision. Lastly, the aggregated inferences are synchronized with GNSS locations to generate inspection maps. The system’s performance was validated using multiple road strips, never seen by the model, containing potholes of different sizes and shapes. The results demonstrated the effectiveness and accuracy of the proposed system. Overall, this research contributes to the research on LiDAR-based pothole inspection by proposing a novel four-step framework and incorporating it into an end-to-end pothole detection system, which can greatly improve the efficiency of pothole maintenance and enhance the safety of road users.
1 December 2021 in Journal of Materials in Civil Engineering
The aim of this study was to examine the effects of different additives on the moisture resistance of asphalt binders using atomic force microscopy (AFM), and to correlate the results with those obtained in macroscale tests. To this end, AFM force spectroscopy was conducted on neat and polymer-modified asphalt binders produced using various warm mix asphalt (WMA) technologies. The technologies considered included Sasobit, Advera, foamed WMA, and Evotherm M1. Furthermore, the asphalt mixtures were prepared using the considered asphalt binders and were tested using the AASHTO T 283 test. The results of this study show that the most significant factor affecting the AFM adhesive forces of asphalt binders is the use of polymer additives. However, the interactions between various chemical groups in asphalt binders and the considered additives differ. Finally, it was found that the effect of aggregate-binder adhesive bonds on indirect tensile strength is greater than that of the binder’s cohesive bonds, as the cracking in this AASHTO T 283 test has more tendency to occur at the interface between the aggregate and the binder due to the high stress concentration.
6 October 2022 in Innovative Infrastructure Solutions