Subsea jumpers are susceptible to in-line and/or cross-flow vortex induced vibration (VIV) fatigue damage due to sea bottom currents. However, there is no proven industry standard design analysis methodology currently available specifically for assessing subsea jumper VIV response. In 2012, ExxonMobil conducted a jumper VIV model test to assess the validity of potential jumper VIV prediction approaches. A towing test rig was used to expose a small scale jumper model to flow conditions simulating uniform bottom currents. The jumper model was instrumented to acquire acceleration, bending strain and end connection load data. Several accelerometers and strain gauges were installed to enable reconstruction of static and dynamic deformations and bending deflections along the jumper model. Towing tests at different orientations and tow speeds were performed on both a bare pipe model and a straked pipe model. The data were analyzed to examine the frequencies and amplitudes of the jumper vibration. The data from these experiments provide a benchmark for validating jumper VIV prediction approaches. In this paper, the model test program is presented including model testing philosophy, jumper design and fabrication, and high level model test results.
1 June 2006 in International Journal of Computational Fluid Dynamics
A three-dimensional turbulent flow through a multistage centrifugal pump is numerically simulated using a commercial CFD software package. The simulation and analysis include flow fields in rotating impeller and stationary diffuser and is completed in a multiple reference frame. The standard k–ε turbulence model is applied. The analysis of the simulation reveals that the reverse flows exist in the zone near the impeller exit and diffuser entrance, resulting in asymmetric and unsteady flow field. There is a considerable interference on the velocity field at the impeller exit due to the interaction between impeller blades and diffuser vanes. The hydraulic performance is connected and evaluated with the 3D computational flow field. The current computation is verified by comparing predicted and measured head.
The viscous–plastic (VP) rheology with an elliptical yield curve and normal flow rule is implemented in a Lagrangian modelling framework using the smoothed particle hydrodynamics (SPH) meshfree method. Results show, from a perturbation analysis of SPH sea-ice dynamic equations, that the classical SPH particle density formulation expressed as a function of sea-ice concentration and mean ice thickness leads to incorrect plastic wave speed. We propose a new formulation for particle density that gives a plastic wave speed in line with theory. In all cases, the plastic wave in the SPH framework is dispersive and depends on the smoothing length (i.e., the spatial resolution) and on the SPH kernel employed in contrast to its finite-difference method (FDM) implementation counterpart. The steady-state solution for the simple 1D ridging experiment is in agreement with the analytical solution within an error of 1 %. SPH is also able to simulate a stable upstream ice arch in an idealized domain representing the Nares Strait in a low-wind regime (5.3 m s−1) with an ellipse aspect ratio of 2, an average thickness of 1 m and free-slip boundary conditions in opposition to the FDM implementation that requires higher shear strength to simulate it. In higher-wind regimes (7.5 m s−1) no stable ice arches are simulated – unless the thickness is increased – and the ice arch formation showed no dependence on the size of particles, in contrast to what is observed in the discrete-element framework. Finally, the SPH framework is explicit, can take full advantage of parallel processing capabilities and shows potential for pan-Arctic climate simulations.
13 August 2021 in Cold Regions Science and Technology