Electrolytes have a wide range of technological applications. Despite the recent improvements in characterizing and predicting the phase behavior of microemulsion systems by hydrophilic-lipophilic deviation (HLD) and net-average curvature (NAC) frameworks, they are ineffective in the presence of different salts. This work seeks to bridge this gap by investigating the influence of salt nature on the microemulsion phase formulation. First, a one-dimensional salinity scan on different microemulsion systems consisting of sodium dodecyl benzene sulfonate as a surfactant, hexane as an oil and, several brines was carried out, and the effect of each salt on the phase behavior were precisely evaluated. The results for optimum salinity and solubilization parameter of different salts were consistent with the Hofmeister series. In addition, multiple linear regression model is presented to accurately predicting the optimum salinity of different salts using this research data and all the available experimental data. The results revealed that the values estimated by this model is in significant consistency with the experimental data by correlation coefficient of 0.92. Finally, the effect of salt type on the NAC parameters (length parameter, and characteristic length $$)$$ were evaluated to improve the predicting ability of this equation of state in the presence of various salts. We found that salt nature has a significant impact on both these parameters. It was found that the length parameter is linearly dependent on the optimum ionic strength of salts while the salting-out capacity of each salt was predominant factor affecting the characteristic length.
11 February 2013 in The Journal of Physical Chemistry B
In the presence of gravity or other external fields, liquid surface curvature deviates from a spherical shape and the surface configuration can be found by numerical integration of the Young–Laplace equation and the typical initial point for integration is the apex of the interface. The meniscus shape in large Bond number systems, which have the central portion of the interface flattened, cannot be determined with the apex as the initial point for integration. Here we find the depth of capillary menisci by considering an initial point for integration to be at the three-phase-contact-line (TPCL) and evaluate the curvature at the TPCL by free energy analysis and inspect the effect of different parameters on the interface shape. A new parameter—which is the deviation of equilibrium curvature at the TPCL from the spherical shape (SR)—is introduced and inspected and it was found that at a Bond number of 13 the maximum deviation, approximately 0.8 of spherical curvature, takes place while for large enough Bond numbers the curvature at the three-phase contact line is near the spherical shape (0.95 < SR < 1). A potential application of this approach is to measure the capillary rise at the TPCL to find the surface tension in high Bond number systems such as those with low surface/interfacial tensions.