The aim of this work is to characterize and evaluate the retention of Cu2+ and Ni2+ from single and binary systems by alginate-Moroccan clay bio-composite with the utilization of calcium chloride as a cross-linking agent, using the ionotropic gelation method. The bio-nanocomposite was characterized by using a variety of techniques (SEM, EDX, XRD, and pHPZC). The efficiency of the adsorbent was investigated under different experimental conditions by varying parameters such as pH, initial concentration, and contact time. To demonstrate the adsorption kinetics, various kinetic models were tried and assessed, including pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich models. The research results show that the adsorption process of Cu2+ and Ni2+ metal ions follows a pseudo-second-order kinetic model, and the corresponding rate constants were identified. To evaluate the parameters related to the adsorption process in both single and binary systems, different mathematical models of isotherms, such as Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich, were investigated. The correlation coefficients obtained showed that the most suitable isotherm for describing this adsorption process is the Langmuir model. The process is considered to be physical and endothermic, as suggested by the positive values of ΔH° and ΔS°, indicating increased randomness at the solid/liquid interface during Cu2+ and Ni2+ adsorption. Furthermore, the spontaneity of the process is confirmed by the negative values of ∆G°. The bio-nanocomposite beads demonstrated a maximum adsorption capacity of 370.37 mg/g for Ni2+ and 454.54 mg/g for Cu2+ in the single system. In the binary system, the maximum adsorption capacities were observed to be 357.14 mg/g for Ni2+ and 370.37 mg/g for Cu2+. There is significant evidence for the use of alginate-Moroccan clay bio-nanocomposite as a cost-effective alternative adsorbent for the efficient removal of metal ions in single and binary systems.
2 February 2025 in International Journal of Biological Macromolecules
This research aims to synthesize a novel hydrogel bio-composite based on natural clay, sodium alginate (Na-AL), and iota-carrageenan as adsorbents to remove phosphate ions from aqueous solutions. The adsorbents were characterized by a variety of techniques, such as Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy coupled with energy dispersive X-rays (SEM-EDX), and the determination of point zero charge (PZC). This research investigated how the adsorption process is influenced by parameters such as adsorbent dose, contact time, solution pH, and temperature. In this study, we used four isotherms and four kinetic models to investigate phosphate ion removal on the prepared bio-composite. The results showed that the second-order kinetic (PSO) model is the best model for describing the adsorption process. The findings demonstrate that the R2 values are highly significant in both the Langmuir and Freundlich models (very close to 1). This suggests that Langmuir and Freundlich models, with a diversity of adsorption sites, promote the adsorption of phosphate ions. The maximum adsorbed amounts of phosphate ions by the bio-composite used were 140.84 mg/g for H2PO4− ions and 105.26 mg/g for HPO42− ions from the batch system. The positive ∆H° confirms the endothermic and physical nature of adsorption, in agreement with experimental results. Negative ∆G° values indicate spontaneity, while the positive ∆S° reflects increased disorder at the solid–liquid interface during phosphate uptake. The main parameters, including adsorbent dosage (mg), contact time (min), and initial concentration (mg/L), were tuned using the Box–Behnken design of the response surface methodology (BBD-RSM) to achieve the optimum conditions. The reliability of the constructed models is demonstrated by their high correlation coefficients (R2). An R2 value of 0.9714 suggests that the model explains 97.14% of the variability in adsorption efficiency (%), which reflects its strong predictive capability and reliability. Finally, the adsorption behavior of phosphate ions on the prepared bio-composite beads was analyzed using an artificial neural network (ANN) to predict the process efficiency. The ANN model accurately predicted the adsorption of phosphate ions onto the bio-composite, with a strong correlation (R2 = 0.974) between the predicted and experimental results.
Alginate-based composite materials have attracted significant interest for energy and environmental applications owing to their biodegradability, low toxicity, and economic viability. In this work, a functional alginate hydrogel bead system incorporating layered double hydroxides (MgFe-LDH) as reactive fillers is developed to overcome the handling and stability limitations associated with powdered LDHs and to enable sustainable nutrient removal from aqueous media. The increasing discharge of phosphate and nitrate into water bodies highlights the need for polymeric materials combining environmental compatibility with tailored chemical functionality. Alginate hydrogel composite beads were synthesized via coprecipitation and homogeneous dispersion of MgFe-LDH within the polymer matrix, followed by ionic crosslinking, leading to the formation of a biopolymer–inorganic hybrid network with enhanced adsorption performance. Comprehensive characterization using SEM–EDX, FTIR, and XRD confirmed the effective distribution of LDHs within the hydrogel structure and the involvement of alginate carboxylate groups in interfacial interactions and adsorption mechanisms. Phosphate removal was only weakly affected by competing anions, whereas nitrate removal decreased significantly in the presence of bicarbonate and sulfate. Equilibrium was achieved within 120 min for phosphate (159.41 mg g⁻¹) and 210 min for nitrate (47.5 mg g⁻¹), with adsorption kinetics well described by the pseudo-second-order model. Equilibrium data were best fitted by Langmuir, Sips, Toth, and Redlich–Peterson isotherms, suggesting predominantly monolayer adsorption occurring on weakly heterogeneous surface sites. Thermodynamic analysis confirmed the spontaneous nature of nutrient adsorption, with endothermic phosphate and exothermic nitrate processes. Process optimization using response surface methodology (RSM) identified optimal operating conditions, while artificial neural network (ANN) modeling provided superior predictive capability. Overall, the developed LDH-functionalized alginate hydrogel beads represent a biodegradable, low-cost, and reactive polymer-based material with strong potential for nutrient remediation in wastewater treatment applications