Currently, the focus of production is shifting towards the use of innovative manufacturing techniques and away from traditional methods. Additive manufacturing technologies hold great promise for creating industrial products. The industry aims to enhance the reliability of individual components and structural elements, as well as the ability to accurately anticipate component failure, particularly due to fatigue. This paper explores the possibility of predicting component failure in parts produced using the WAAM (wire arc additive manufacturing) method by employing fractal dimension analysis. Additionally, the impact of manufacturing imperfections and various heat treatment processes on the fatigue resistance of 30CrMnSi steel has been investigated. Fatigue testing of samples and actual components fabricated via the WAAM process was conducted in this study. The destruction of the examined specimens and products was predicted by evaluating the fractal dimensions of micrographs acquired at different stages of fatigue testing. It has been established that technological defects are more dangerous in terms of fatigue failure than microstructural ones. The correctly selected mode of heat treatment for metal after electric arc welding allows for a more homogeneous microstructure with a near-complete absence of microstructural defects. A comparison of the fractal dimension method with other damage assessment methods shows that it has high accuracy in predicting part failure and is less labor-intensive than other methods.
In the context of the digital transformation of industrial production, the need for intelligent maintenance and repair systems capable of ensuring reliable operation of machine-tool equipment without operator involvement is growing. This present study reviews the current state and future development of diagnostic and condition-monitoring systems for metalworking machine tools. A review of international standards and existing solutions from domestic and international vendors in vibration diagnostics has been conducted. Particular attention is paid to non-intrusive vibration diagnostics, digital twins, multiparametric analysis methods, and neural network approaches to failure prediction. The architecture of the developed system is presented. The concept of the system is developed in full compliance with Russian and international standards of vibration diagnostics. At its core, the comprehensive digital twin relies on machine learning methods. The proposed architecture is a predictive-maintenance system built on interconnected digital twin realizations: the dynamic machine passport of a unit, operational data, and a comprehensive digital twin of the machine-tool equipment. The potential of neuromorphic computing on a hardware platform is being considered as a promising element for local-condition classification and emergency protection. At the current development stage, the operating principle has been demonstrated along with the integration into the control loop. The system is now at the beginning of laboratory testing. It demonstrates capabilities for comprehensive assessment of the equipment’s technical condition based on multiparametric data, short-term vibration trend forecasting using a Long Short-Term Memory network, and state classification using a Multilayer Perceptron model. The results of the system’s testing on a turning machining center have been analyzed.
The paper presents an experimental automated system for metered nanopowder feeding in functional-gradient nano-alloying during WAAM. The system comprises a gas preparation unit, scalable hopper cells, digital flow meters, and a PLC- and PC-based control unit; these elements provide metered controlled supply of nanopowder compositions into the weld pool. Particular attention is paid to the driven throttle unit, which enables dynamic adjustment of the gas-powder mixture concentration. Within the work, a test bench integrated with WAAM equipment was assembled. Tests with PAP-1 powder and 08G2S wire confirmed the operation of the metered feeding system.
30 September 2024 in Frontier materials & technologies
The authors carried out the study of the influence of 3D printing modes on the structure and chemical composition of 30HGSA steel (chromansil) samples produced by the method of additive electric arc surfacing. To study the influence of the electric arc surfacing mode on the chemical composition of the steel under study, an optical emission analysis of the samples was carried out. The influence of the surfacing mode on the resulting structure was assessed over the entire height of the deposited walls at magnifications of ×50, ×100, ×200 and ×500. Optical emission analysis identified a change in the material chemical composition associated with the loss of chemical elements. It was found that the degree of loss of C, Cr and Si increases almost linearly and is directly proportional to the surfacing heat input (Q, J/mm). The exact influence of an increase in the surfacing heat input on the Mn content was not found, but a relationship between the degree of its loss and the voltage (U, V) during surfacing of samples was identified. Microstructural studies of all samples did not reveal a large number of systemically formed structural defects characteristic of cast and welded products (pores, shrinkage cavities, etc.), which confirms the high quality of the metal in goods produced by electric arc surfacing. Analysis of micrographs taken in different areas of the samples allowed determining that the metal microstructure does not undergo significant changes under different surfacing modes; the main tendencies in changes in the structure along the height of the sample are preserved. All samples demonstrated the formation of a highly dispersed structure, regardless of the 3D printing parameters. The most favorable metal structure, suitable for subsequent use in the production of goods using additive manufacturing, was recognized as the structure of the sample deposited using mode No.5 (I=160A, U=24V, Q=921.6J/mm). This mode can be used for further study of the problems of additive electric arc surfacing of 30HGSA steel.
Workpieces made of 30CrMnSi steel obtained by the WAAM method under different 3D printing modes are investigated. The influence of printing parameters on t