Laser deposition manufacturing (LDM) has drawn unprecedented attention for its advantages in manufacturing large-scale and complex metal components. During the process of LDM, a large thermal gradient is generated due to thermal cycling and heat accumulation. As a result, large residual stress and deformation are formed in the LDM metal components. Then, the dimensional accuracy of the metal components becomes poor. To achieve deformation control and increase dimensional accuracy, the deformation prediction of metal components is very meaningful and directional. However, the traditional thermoelastic–plastic method can only achieve deformation prediction for small-scale LDM metal components. Because of the low computational efficiency, it is extremely difficult to meet deformation prediction demand for large-scale metal components. Based on feature partitioning and the inherent strain method, a rapid deformation prediction method is proposed for large-scale metal components in this manuscript. Firstly, to solve the problem of poor consistency of formation quality due to the randomness of the partition process, the partitioning process was established according to typical geometric features. Secondly, the inherent strain values for different partitions were obtained by considering the effects of the extraction method, mesh size, equivalent value layer, and partition size on the inherent strain values. Then, using the inherent strain method, the deformation of large-scale components was predicted rapidly. Comparing the simulation results with the experimental results, the following conclusions were obtained. The deformation predicted by the method proposed in this manuscript is consistent with the deformations predicted using the traditional thermoelastic–plastic method and the experimental method. Significantly, applying the method proposed in this manuscript to predict the deformation of LDM metal components, computational efficiency is improved by 27.25 times compared with results using the conventional thermoelastic–plastic method.
1 January 2019 in Journal of Advanced Mechanical Design, Systems, and Manufacturing
Heavy duty tractor plays a vital role in traffic transport industry, in roads and building construction. In all of these applications, the structural failure of vehicle is the key issue in the process of safe running. This paper is devoted to the investigation of dynamic characteristics and fatigue reliability for the heavy duty tractor. Appling the non-similar substructure modeling technology, the novel integrated simulation model of heavy duty tractor is established. The total number of elements of the simulation model are reduced obviously from 4,380,449 to 117,065. A complete experimental process, which contains selecting digital acquisition module, the layout of sensors, the data processing, etc., is presented. The validity of the analysis method and the simulation model is verified by comparing with experimental results. The analysis methods of the random frequency domain and the multiaxial fatigue are employed to obtain the fatigue damage samples of heavy duty tractor. Meanwhile, the influences of confidence, pre-stress field and channel correlation on reliability are discussed. Moreover, on the basis of the system reliability distribution, the reliability of determined life and the index of B10 life are assessed. This study gives a reference for avoiding the structural failure and enhancing the system safety.
4 June 2021 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
This paper presents a detailed investigation about the effect of structural damping and modal truncation number on vehicle dynamic characteristics. Finite element method and experimental method are applied to research vehicle’s dynamic response. According to the real vehicle’s structure, the dynamic simulation model of vehicle is established by the substructure modeling method. In order to research the influence of different variables on vehicle’s dynamic responses, the control variable method is adopted. In other words, the parameters of structural damping and mode truncation number are changed respectively. Comparing the dynamic response results, the influence rules of structural damping and mode truncation number on dynamic responses are obtained. Results show that the dynamic responses of vehicle changes significantly with the change of structural damping and mode truncation number. The studying results provide important significance for the determination of parameters. As well as, the correctness and reliability of the analysis results are verified by the experimental method.
Laser-directed energy deposition (L-DED) technology is increasingly used in the manufacturing industry, in which the powder convergence of the feeding nozzle affects the accuracy and quality of additive manufacturing parts. However, there is nothing in the literature that gives a comprehensive optimization scheme for the powder feeding structure of the ring nozzle. In order to investigate the effect of the internal structure for the annular nozzle on powder convergence, in this paper, finite element analysis models for the annular nozzle are established, and the Lagrangian–Eulerian method is used to analyze the influence of different outlet shapes, powder feeding inclination angles, outlet gaps, and inlet shapes of annular nozzles on the powder convergence. The results indicate that the parallel outlet shape is more suitable for the annular nozzle, and the waist diameter of the powder stream decreases gradually with the decrease in the power feeding inclination angle and the outlet gap. The inlet shape of the powder storage chamber plays a guiding role in the moving direction of the powder particles; when the powder feeding inclination angle is 17° and the outlet gap is 0.5 mm, the waist diameter of the powder stream is reduced by 49%. In addition, the effects of particle size, carrier gas rate, and laser shielding gas on the powder convergence are also studied, and the results indicate that, with the reduction of particle size and carrier gas rate, the powder convergence can be effectively improved, and the waist diameter of powder stream becomes 1.42 mm. With the increase in the laser shielding gas rate, the powder convergence position moves down. The research results provide a basis for the structural optimization to design a high-convergence annular nozzle for the laser additive manufacturing process.
9 October 2025 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Laser deposition manufacturing (LDM) for large metallic components, especially in aerospace, is expanding significantly. However, thermal accumulation during deposition can induce excessive residual stress, causing warping and cracking. Therefore, quickly predicting and mitigating stress and distortion is essential for achieving high-quality large-scale metal additive manufacturing. Stress fields and distortion distribution in LDM using a feature partitioning method combined with the Temperature Function Method (TFM) are analyzed in this work. Experimental validation confirms its validity and accuracy. The TFM based on feature partitioning achieves exceptional computational efficiency, reducing simulation time by 96.55% compared to traditional methods while maintaining accuracy (6.83% distortion deviation). Building on this efficient TFM approach, the core contribution proposes and systematically evaluates a novel minimum temperature gradient jump strategy (TFM-MG) for active distortion control. TFM-based simulations assess various jump strategies’ effects. Results show the TFM-MG strategy significantly outperforms others: reducing maximum distortion by 29.15% (compared to conventional sequential deposition) and more effectively alleviating residual stress concentrations (>500 MPa), establishing a mechanism linking stress mitigation and distortion suppression. This work provides a foundation for formulating optimal forming paths in large metallic additive LDM.