Xiang Zou

Dr. Xiang Zou


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2023 in Machines
Verified
Journal Article
Open access
PDF file
XZXiang Zou
Xiang Zou
LFLiandong Fu
Liandong Fu
LWLin Wu
Lin Wu
WZWenhao Zuo
Wenhao Zuo
Research on the mixing process of gas–liquid–solid multiphase flow in a high-pressure abrasive water jet (HP-AWJ) is of great significance in improving the performance of water jet cutting. In this paper, the Euler method-VOF model, a computational fluid dynamics (CFD) simulation method, is used to solve the multiphase flow of air–water in an abrasive water jet (AWJ). The Euler–Lagrange method is further used to study the multiphase flow of abrasive particles. The method considers the shape factor of the particle, uses the Rosin–Rammler function, and defines an effective model for the particle-to-wall wear model. By solving the velocity of the continuous phase and particulate phase in the AWJ cutting head, the problem of nozzle wear caused by particles is studied. Finally, the exit velocity of the AWJ and particle wear are investigated by varying the model’s parameters. The results show that the double abrasive tube model effectively improved the problem of one-sided wear inside the nozzle, and the tangential velocity of the air affected the acceleration process of the abrasive inside the nozzle, with smaller abrasive velocity resulting in less wear on the model. Simultaneously, the effects of the abrasive inlet tube and mixing chamber size on abrasive exit velocity and nozzle wear are analyzed. The results obtained provide valuable guidance for addressing the multiphase flow mixing issues in the AWJ, improving the abrasive acceleration process and extending the nozzle’s lifetime.

31 March 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
LWLin Wu
Lin Wu
XZXiang Zou
Xiang Zou
YGYuan Guo
Yuan Guo
LFLiandong Fu
Liandong Fu
Machining of No. 45 steel (AISI 1045) becomes more vital due to its widespread use. In this study, machining performances of abrasive water jet machining (AWJM) of No. 45 steel, including material removal rate, notch depth, and nozzle wear rate, were obtained by experimental and computational results. The Taguchi L16 orthogonal array design was used to study the influence of process parameters on machining performance. The optimal material removal rate and notch depth were achieved when abrasive particle size, operating pressure, and abrasive feed rate were 80 #, 400 MPa, and 840 g/min, respectively. The optimal nozzle wear rate was achieved when abrasive particle size, operating pressure, and abrasive feed rate were 80 #, 400 MPa, and 260 g/min, respectively. When the abrasive particle size is 80 # (namely the mesh number is 80), the particle diameter is usually between 0.18 and 0.25 mm according to the corresponding relationship between the international standard mesh number and particle diameter. Analysis of Variance was conducted to evaluate the statistical significance of the experimental results. Using regression analysis, an empirical model was developed to predict the response values of the AWJM process. Multi-response optimization was then carried out using the Decision Engineering Analysis and Resolution method. The optimal parameter solution for a higher material removal rate, a bigger notch depth, and a smaller nozzle wear rate was achieved when abrasive particle size, operating pressure, and abrasive feed rate were 120 #, 400 MPa, and 870 g/min, respectively.

18 February 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
LWLin Wu
Lin Wu
XZXiang Zou
Xiang Zou
YGYuan Guo
Yuan Guo
LFLiandong Fu
Liandong Fu
High-pressure abrasive water jet (HP-AWJ) cutting is a prominent technology for processing a wide variety of materials. The structural parameters of the nozzle are important for the cutting performance of the HP-AWJ. This paper combines an abrasive particle kinetic energy model and a wall wear model of the nozzle to determine the multi-phase flow of a HP-AWJ nozzle. The flow field structure of the nozzle was optimized using a parametric multi-objective structure optimization design method. A Multi-Objective Heat Transfer Search (MOHTS) was utilized to generate the corresponding mathematical regression model for multiple response results, and the optimal solution sets of Pareto values were further obtained. The optimal HP-AWJ structural parameters could be selected according to the weight influence of multiple response indicators.

1 March 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
XZXiang Zou
Xiang Zou
XGXing-Yu Gao
Xing-Yu Gao
BLBin Liao
Bin Liao
CWChuan-Nen Wei
Chuan-Nen Wei
To solve the problem of glue breakage and overflow in the packaging process of mobile phones, a glue detection algorithm based on the depth map is proposed. By collecting the image no gluing and gluing after dispensing, the pixel value of each frame in the corresponding position of the corresponding sample is sequentially intercepted in the same sample, and the glue contour is reconstructed by rearranging the intercepted ROI. Last, measure the width and height information of the glue according to the contour, and judge the defect problem at the same time. Experimental results show that the algorithm can accurately measure the result of the micron-level glue, and accurately determine the lack of glue. At the same time, the measurement accuracy of the algorithm is 0.01mm, and the measurement results are accurate and stable.