Due to the extremely complex working conditions, various health and safety hazards are present in underground coal mines, which cause economic losses and heavy casualties. Among these hazards, methane gas explosion and coal combustion are recognized as the two major hazards to miners. Traditional electronic sensors in mine safety monitoring systems have problems such as low precision, a large amount of maintenance, and monitoring dead zones. In the past decade, gas sensors based on tunable diode laser absorption spectroscopy (TDLAS) have been extensively studied and tailored for use in the coal mine industry because of their advantages of high sensitivity, high stability, fast response, intrinsic safety, and remote monitoring. This invited paper introduces the recent progress and typical applications of TDLAS-based methane sensors, carbon monoxide sensors, and multi-gas monitoring systems in coal mine gas monitoring, fire prevention, and early warning in intelligent coal mines.

We proposed a new method for gas detection in photoacoustic spectroscopy based on acousto-optic Q-switched fiber laser by merging a transmission PAS cell (resonant frequency f₀ = 5.3 kHz) inside the fiber laser cavity. The Q-switching was achieved by an acousto-optic modulator, achieving a peak pulse power of ~679 mW in the case of the acousto-optic modulation signal with an optimized duty ratio of 10%. We used a custom-made fiber Bragg grating with a central wavelength of 1530.37 nm (the absorption peak of C₂H₂) to select the laser wavelength. The system achieved a linear response (R² = 0.9941) in a concentration range from 400 to 7000 ppmv, and the minimum detection limit compared to that of a conventional intensity modulation system was enhanced by 94.2 times.