Currently, the time of endurance of electric multicopters is still too short for many mission requirements, and optimizing the efficiency of the propulsion system is considered as an effective way to overcome this problem. This paper proposes a practical method to help designers quickly select the optimal products of the propulsion system to maximize the multicopter efficiency under the desired flight condition. First, the modeling methods for the components of the propulsion system are studied respectively to describe the optimization problem mathematically. Secondly, methods are proposed to find optimal motor and propeller combination with the maximum thrust efficiency according to the given design requirements. Finally, factors that may affect the hovering time of multicopters are analyzed, and the optimal battery parameters are obtained for maximizing the multicopter endurance. Experiments and simulations are performed to demonstrate the effectiveness and practicability of the proposed method.

In a probe and drogue aerial refueling system, the bow wave of the receiver aircraft will produce a strong aerodynamic effect on the drogue once the receiver follows the drogue at a close distance. It is a major difficulty of docking control in the probe and drogue refueling. This paper analyses the bow wave effect and presents a simple method to model it. Firstly, the inviscid flow around the receiver is modeled based on the stream function defined by basic stream singularities. Secondly, a correction function is developed to eliminate the error caused by the absence of air viscosity. Then, the aerodynamic coefficients are used to calculate the induced aerodynamic force on the drogue. The obtained model is in an analytical form that can be easily applied to the controller design and the real-time simulations. In the verification part, computational fluid dynamics (CFD) simulation tests are conducted to validate the obtained flow fields and aerodynamic forces. Finally, the modeling method is applied to an F-16 receiver aircraft in a previously developed autonomous aerial refueling simulation system. The simulations results are analyzed and compared with the NASA flight-test data, which demonstrates the effectiveness of the proposed method

This paper proposes a credible simulation platform based on real-time FPGA-based hardware-in-the-loop (HIL) simulation, and then an assessment method is proposed to quantitatively assess its simulation credibility. By using the FPGA to simulate all sensor chips, the simulation platform can ensure that the tested electronic system maintains the same hardware and software operating environment in both simulations and experiments, which makes it possible to perform the same tests in the simulation platform and the real experiment to compare and analyze the simulation errors. Then, the testing methods and assessment indices are proposed to assess the simulation platform from various perspectives, such as performance, time-domain response, and frequency-domain response. These indices are all normalized to the same scale (from 0 to 1) and mapped to a uniform assessment criterion, which makes it convenient to compare and synthesize different assessment indices. Finally, an overall assessment index is proposed by combining all assessment indices obtained from different tests to assess the simulation credibility of the whole simulation platform. The simulation platform and the proposed assessment method are applied to a multicopter system, where the effectiveness and practicability are verified by simulations and experiments.