Hamza Kahri

Dr. Hamza Kahri

orcid

Research Focus & Metrics

Representative Publications

View All Publications
23 November 2016 in Nano Research
Verified
Journal Article
Closed access
PDF file
HKHamza Kahri
Hamza Kahri
MSMelike Sevim
Melike Sevim
OMOnder Metin
Onder Metin
We address the composition-controlled synthesis of monodispersed AgPd alloy nanoparticles (NPs), their assembly for the first time on mesoporous graphitic carbon nitride (mpg-C3N4), and the unprecedented catalysis of mpg-C3N4@AgPd in the hydrolytic dehydrogenation of ammonia borane (AB) at room temperature. Monodispersed AgPd alloy NPs were synthesized using a high-temperature organic-phase surfactant-assisted protocol comprising the co-reduction of silver(I) acetate and palladium(II) acetylacetonate in the presence of oleylamine, oleic acid, and 1-octadecene. This protocol allowed the synthesis of four different compositions of AgPd alloy NPs. The AgPd alloy NPs were then assembled on mpg-C3N4, reduced graphene oxide, and Ketjenblack using a liquid-phase self-assembly method. Among the three supports tested, the mpg-C3N4@AgPd catalysts provided the best activity because of the Mott–Schottky effect, which was driven by the favorable work function difference between mpg-C3N4 and the metal NPs. Moreover, the activity of the mpg-C3N4@AgPd catalyst was further enhanced by an acetic acid treatment (AAt), and a record initial turnover frequency of 94.1 mol(hydrogen)·mol(catalyst)−1·min−1 was obtained. Furthermore, the mpg-C3N4@Ag42Pd58-AAt catalyst also showed moderate durability for the hydrolysis of AB. This study also includes a wealth of kinetic data for the mpg-C3N4@AgPd-catalyzed hydrolysis of AB.


1 November 2023 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
JWJassem Wannassi
Jassem Wannassi
NMNadhem Missaoui
Nadhem Missaoui
CMChama Mabrouk
Chama Mabrouk
HBHoucine Barhoumi
Houcine Barhoumi
RCRobert D. Crapnell
Robert D. Crapnell
HKHamza Kahri
Hamza Kahri
In this research a highly microporous Cu-BTC (denoted as HKUST-1) was synthesized using a simple and rapid synthesis room temperature method. The as-prepared HKUST-1 obtained at room temperature for 10 min exhibited a very high Brunauer–Emmett–Teller (BET) surface area of 1875 m2/g, pore volume (Vp) of 0.789 cm3/g, and average micropore size of 7.84 Å. Based on this product, we successfully fabricated a conductive electrochemical sensor HKUST-1@PANI by polymerizing a conductive polyaniline polymer (PANI) around the metal-organic framework HKUST-1. Fourier transform infrared (FTIR) spectra, X-ray diffraction pattern (XRD) support the formation of HKUST-1@PANI. Furthermore, scanning electron microscopy (SEM) studies confirmed that PANI uniformly covered the surface of HKUST-1. We used the resulting material to build a new electrochemical sensor for the reliable detection of lead ions. The electrochemical response of the developed sensor towards ions was evaluated using differential pulse voltammetry (DPV). Under optimized conditions, linear detection was reproducible over the Pb2+ concentration range from 0.005 to 50 μM with a minimum detection limit of 5 nM. The sensor is practically usable in a wide variety of environments, as it is virtually immune to interference from other coexisting ions.

21 January 2020 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
CHChedia Ben Ali Hassine
Chedia Ben Ali Hassine
HKHamza Kahri
Hamza Kahri
HBHoucine Barhoumi
Houcine Barhoumi
A novel and an easy method was developed to fabricate non-enzymatic electrochemical sensor for sensitive detection of dopamine (DA). A composite material contains graphene oxide and nickel nanoparticles was deposited on a glassy carbon electrode (GCE) surface by cyclic voltammetry. Then, gold particles were loaded on the surface of the resulting material via galvanic replacement method in order to obtain Ni-Au bimetallic nanoparticles combined with the electrodeposited graphene oxide (EG). The electrochemical behavior and the structure of the obtained electrode were characterized using scanning electron microscopy, cyclic voltammetry and impedance spectroscopy. The response of the modified electrode for DA detection is linear in the range from 2 × 10 −7 to 10 −4 M, the sensitivity is 0.641 A M −1 and the detection limits is 10 −7 M. As well, it showed a high selectivity in the presence of Uric acid (UA), Ascorbic acid (AA) and glucose. Due to its low-cost, an easy process and great performance, this GCE/EG-Ni-Au(NPs) electrode can be a good candidate for the fabrication of non-enzymatic dopamine sensor.

2 September 2024 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
JWJassem Wannassi
Jassem Wannassi
NMNadhem Missaoui
Nadhem Missaoui
CTChalal Tachouaft
Chalal Tachouaft
CMChama Mabrouk
Chama Mabrouk
CACécile Autret-Lambert
Cécile Autret-Lambert
HKHamza Kahri
Hamza Kahri
The combination of metal-organic frameworks (MOFs) and metal nanoparticles offers great prospects for improving the electrochemical properties of sensors. In this paper, silver (Ag) nanoparticle-doped metal-organic framework (MIL-101) composites (Ag-MIL-101) were prepared by ultrasonic treatment of MIL-101 and the reduction of the metal precursor (AgNO3) within the MIL-101 material. X-ray diffraction patterns confirmed the formation of Ag-MIL-101(Cr). The resulting material was used to construct a new electrochemical sensor for the reliable detection of dopamine. The electrochemical response of the developed sensor toward dopamine was evaluated using differential pulse voltammetry. A Box-Behnken design was performed, and response surface methodology was used to study the influence of different parameters on dopamine detection. The response of the modified electrode for dopamine detection was linear in the range from 0.02 μM to 10 μM, and the detection limit was 0.02 μM (S/N = 3). Additionally, it showed high selectivity in the presence of urea, uric acid, ascorbic acid, and L-arginine. Due to its low cost, easy process, and great performance, this Ag-MIL-101/GCE electrode can be a good candidate for the fabrication of a non-enzymatic dopamine sensor.

4 February 2025 in Chempluschem
Verified
Journal Article
Closed access
JWJassem Wannassi
Jassem Wannassi
NMNadhem Missaoui
Nadhem Missaoui
CMChama Mabrouk
Chama Mabrouk
CCCarlos A. Castilla‐Martinez
Carlos A. Castilla‐Martinez
YMYoussra Moumen
Youssra Moumen
HKHamza Kahri
Hamza Kahri