Guoqiang Gao

Dr. Guoqiang Gao

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JDJuchuan Dai
Juchuan Dai
XYXin Yang
Xin Yang
Wenxian YangWenxian Yang
Wenxian Yang
GGGuoqiang Gao
Guoqiang Gao
MLMimi Li
Mimi Li
Active wake management (AWM) via yaw control has been discussed in recent years as a potential way to improve the power production of a wind farm. In such a technique, the wind turbines will be required to work frequently at misaligned yaw angles in order to reduce the vortices in the wake area behind the turbines. However, today, it is still not very clear about how yaw operation affects the dynamics and power generation performance of the wind turbines. To further understand the effects of yaw operation, numerical research is conducted in this paper. In the study, the optimal size of the flow field used in the computational fluid dynamics (CFD) calculation was specifically discussed in order to obtain an efficient numerical model to quickly and accurately predict the dynamics and the performance of the turbines. Through this research, the correlation between the blade loads during yaw and non-yaw operations is established for aiding yaw control, and the blade loads and power generation performances of the wind turbine during yaw operation under different wind shear and blade deflection conditions are analyzed for understanding the effects of yaw operation. It is found that the optimal size of the flow field for performing efficient and accurate CFD calculations does exist. The misaligned yaw operation generally tends to decrease the loads acting on the blade. However, the aerodynamic energy captured by the turbine rotor and blade loads during yaw operation is not only dependent on the yaw angle of the rotor but is also affected by wind speed, rotor speed, the pitch angle of the blades, blade deflection, and wind shear. Particularly, it is interestingly found that wind shear can cause undesirable fluctuation of the power, which will challenge the power quality of the wind farm if no measures are taken.

27 September 2024 in Energies
Verified
Journal Article
Open access
PDF file
GGGuoqiang Gao
Guoqiang Gao
HSHongsheng Shu
Hongsheng Shu
ZYZixin Yi
Zixin Yi
YSYang shuyi
Yang shuyi
JDJuchuan Dai
Juchuan Dai
ZFZhang Fan
Zhang Fan
Numerical simulation technology is a crucial tool for reducing costs and increasing efficiency in the wind power industry. However, with the development of large-scale wind turbines, the computational cost of numerical simulation has gradually increased. This paper uses the geometric similarity, structural similarity criterion, Reynolds similarity and boundary layer theory to establish a scaled model of the geometric three-dimensional shape, composite material, and finite element mesh of large wind turbine blades. The study analyzes the aerodynamic, gravitational, and centrifugal load variations within the scaled model. The proportional relationship between the scaled model’s operating parameters, the numerical simulation’s environmental parameters, and the mechanical response parameters is established. These parameters are coordinated to ensure the similarity of the blade structure and the fluid dynamics. For a geometric scale factor of 0.316, the relative difference in maximum deflection is 4.52%, with a reduction in calculation time by 48.1%. On the premise of ensuring the calculation accuracy of the aerodynamic and structural response of the blade, the calculation efficiency is effectively improved.

7 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XZXuan Zhao
Xuan Zhao
GGGuoqiang Gao
Guoqiang Gao
MWMinshun Wan
Minshun Wan
JDJuchuan Dai
Juchuan Dai
An accurate formula for calculating the pressure loss in concrete pumping plays a significant guiding role in the design and service process of pump trucks. Based on the flow characteristics of concrete pumping, a straight pipe one-dimensional model for the pressure loss is developed, in which both the viscous force of the mortar in the lubrication layer and the blocking effect of coarse aggregate particles are considered. First, the complex geometrical shapes of the aggregate particles are geometrically reconstructed by using a HandySCAN noncontact scanner and the reverse modeling software Geomagic Design X (v.19.0.2). Then, the equivalent spherical size of nonspherical aggregate particles is calculated according to the equal hydraulic radius principle. The blocking effect of the aggregate particles is converted into the wall roughness. Finally, an explicit expression for the pressure loss in concrete pumping is deduced by using Modi’s equation, Bernoulli’s equation, and Darcy’s formula, and the calculated value is compared with the measured value at a corresponding experimental site. The results indicate that the pressure loss values calculated with the one-dimensional flow model are closer to the actual pumping pressure loss values. The relative error between the results and the actual pumping pressure loss value is about 20.2%.

30 September 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GGGuoqiang Gao
Guoqiang Gao
LWLixiang Wei
Lixiang Wei
XZXuan Zhao
Xuan Zhao
MWMinshun Wan
Minshun Wan
HLHongzhou Li
Hongzhou Li
The rheological behavior of concrete pumping in the bend section is complex. The existing conversion calculation for pumping pressure loss based on the straight pipe section often fails to meet engineering precision requirements. This paper develops a pressure loss correction model for a concrete pumping bend section based on a new one-dimensional flow model for the straight pipe section simulation of particle flow; the study analyzes the impact of parameters such as elbow shape and pumping flow rate on pressure loss. An equivalent conversion relationship between the bend section and the straight section is established. The comparison with the measured pressure values from the project shows that the relative error between the pressure loss values calculated by the correction model and the actual measurements is 15.8%.

27 February 2024 in Research Square
Verified
Preprint
Open access
PDF file
XZXuan Zhao
Xuan Zhao
GGGuoqiang Gao
Guoqiang Gao
MWMinshun Wan
Minshun Wan
JDJuchuan Dai
Juchuan Dai
An accurate formula with high precision for calculating the pressure loss in concrete pumping plays a significant guiding role in the design and service process of pump trucks. Based on the flow characteristics of concrete pumping, a one-dimensional model for the pressure loss was developed in which both the viscous force of the mortar in the lubrication layer and the blocking effect of coarse aggregate particles were considered. First, the complex geometrical shapes of the aggregate particles were reconstructed by using a HandySCAN noncontact 3D laser scanner and the inverse modelling software Geomagic Design X. Then, the equivalent spherical size of uneven aggregate particles was calculated according to the equal hydraulic radius principle. The blocking effect of the aggregate particles was converted into the wall roughness. Finally, an explicit expression for the pressure loss in concrete pumping was deduced by using Modi’s formula, Bernoulli’s equation and Darcy’s formula, and the calculated value was compared with the measured value at a corresponding experimental site. The results indicated that the pressure loss values calculated with the one-dimensional flow model, which are closer to the actual pumping pressure loss values, are more accurate than those obtained with a theoretical empirical formula.