A relatively simple finite element modeling approach – named the Fixed-Strut-Angle Finite Element (FSAFE) Model – is presented in this paper for simulating the hysteretic lateral load behavior of reinforced concrete structural walls with varying levels of flexural and shear deformation contributions on wall response. The behavioral characteristics of the constitutive panel elements incorporated in the model formulation are based on a fixed-crack-angle modeling methodology that also incorporates simple behavioral models for shear–aggregate interlock in concrete and dowel action on reinforcing bars, constituting the shear stress transfer mechanisms across the cracks. Model response predictions are compared with experimentally measured responses of selected wall specimens with varying geometry and reinforcement characteristics; including relatively slender (aspect ratio of 3.0) flexure-controlled walls with rectangular and T-shaped cross-sections, medium-rise walls (aspect ratios of 1.5 and 2.0) with coupled shear-flexural responses, and squat walls (shear span-to-depth ratios of 0.44 and 1.0) with shear-dominant responses. The FSAFE model demonstrates a reasonable level of accuracy in predicting the nonlinear hysteretic response of the wall specimens investigated. Accurate predictions are obtained for the experimentally measured lateral load vs. displacement response characteristics of the walls, including their lateral load capacity, sftiffness, and ductility, as well as their hysteretic response attributes. The model also provides reasonably accurate estimates of the relative contributions of nonlinear flexural and shear deformations to wall lateral displacements, as well as local deformation characteristics including the spreading of nonlinear flexural and shear deformations along wall height, the distribution of transverse normal strains along wall height, and the longitudinal strain profiles across the wall cross-section. It is identified that consideration of instability related wall failures, including buckling of reinforcement and out-of-plane instability of the wall boundary region, is necessary for further improvement of model accuracy.
This paper presents a comprehensive study of five machine learning (ML) algorithms for predicting key characteristics of Reinforced Concrete (RC) structural systems. A novel dataset, ModRes, consisting of 9723 examples derived from modal and response spectrum analyses on masonry-infilled three-dimensional RC buildings, was created for ML applications. The primary objective is to develop an ML model using five distinct algorithms from the literature, capable of concurrently predicting torsional irregularity, modal participating mass ratio (MPMR), and the fundamental period in a 3D environment, while accounting for the influence of infill walls. Additionally, the study aims to determine the applicability of pushover analysis (POA) without the need for extensive numerical modeling and analysis. This approach optimizes the preliminary design process with minimal computational effort, providing valuable insights into dynamic and torsional responses during seismic events. The Categorical Boosting algorithm demonstrated outstanding performance, achieving R2 values of 0.977 for torsional irregularity, 0.997 for the fundamental period, and 0.923 for MPMR on the test dataset. It also successfully predicted POA applicability with an error rate of only 1.36%. This study highlights the practical application of ML algorithms, underscoring their effectiveness in structural engineering.
Increasingly widespread use of nonlinear response history analysis methods for performance-based design/assessment of buildings with complex reinforced concrete (RC) wall systems has underlined the need for development and implementation of more robust nonlinear modeling approaches that can simulate important (yet commonly-ignored) nonlinear response characteristics of RC walls, such as shear-flexure-torsion interaction, plane sections not remaining plane, warping, out-of-plane behavior, nonlinear shear deformations, and shear stress migration across wall cross-section. Such advanced modeling approaches for walls need to be implemented in widely-accessible computational platforms that are capable of efficiently simulating the dynamic response of entire three-dimensional structural systems incorporating walls, under multi-directional seismic excitations. Furthermore, studies available in the literature on dynamic testing of walls and wall systems, and studies on detailed validation of refined wall models against data obtained from such dynamic test campaigns, are both scarce. With these considerations in mind, a new finite element modeling approach, referred to as the Layered Fixed-Strut-Angle Finite Element (LFSAFE) model, was developed and implemented in the widely-accessible analysis platform OpenSees. In this paper, the constitutive behavior and working principles of the LFSAFE model element are summarized. As well, nonlinear dynamic response simulation capabilities of the model are evaluated, via comparison of model response simulations with shake table test results conducted on ( i ) a half-scale isolated U-shaped wall specimen subjected to bi-directional ground accelerations, and ( ii ) a full-scale ten-story wall-frame building specimen subjected to three-directional ground accelerations. The three-dimensional dynamic response simulations presented in this paper demonstrate that the LFSAFE model is efficient in replicating, with reasonable accuracy, the experimentally-measured seismic displacement, acceleration, and deformation demands developing on both the U-shaped wall specimen and the three-dimensional wall-frame building system investigated. Capabilities of the LFSAFE model are demonstrated, and its limitations are identified.
11 May 2023 in Arabian Journal for Science and Engineering