Rahel Heesemann

Mrs. Rahel Heesemann

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 August 2023 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Open access
PDF file
RHRahel Heesemann
Rahel Heesemann
IBIsa Bettermann
Isa Bettermann
RPRoshan Paul
Roshan Paul
MRMilena Rey
Milena Rey
TGThomas Gries
Thomas Gries
CHClaus Hummelsheim
Claus Hummelsheim
The fire protection of materials has an important role in our everyday life and covers a highly diverse spectrum of substances, materials, and fields of application. Important fields of application for fire protection, especially in public areas, are construction and transport, electronic devices, furnishings, and textiles (e.g., applications for occupational safety, carpets, curtains, upholstery, insulation, and technical applications in outdoor areas). The efficient and durable finishing of materials with flame retardant additives is crucial to ensure effective fire protection. Many of the flame retardant additives currently used are based on bromides, chlorides, phosphates, or antimony. However, these flame retardants are harmful to the environment and/or health (not phosphates). Therefore, the use of these flame retardants is already being restricted by EU directives (e.g., REACH regulation), and it is foreseeable that they will be further restricted in the future. To keep up with this development, innovative and sustainable solutions must be developed in the short term. The amount of flame retardant additives that are harmful to the environment and health must be reduced. In the medium term, these harmful additives must be completely replaced by sustainable flame retardant additives that are not harmful to the environment and health. This paper describes research results to reduce the amount of additives in the short term. In order to reduce the amount of additives used, an innovative refinement process is being developed. In a first step, the flame retardant additives are combined with bio-based adhesion promoters (anchor peptides). Anchor peptides bind with high selectivity, binding strength, and occupancy density to a broad portfolio of materials (e.g., synthetic polymers, metals, ceramics, and natural materials) and enable the finishing of the materials with a broad spectrum of functional units (e.g., flame retardant additives). Material functionalization by anchor peptides is energy-efficient and resource-saving at room temperature in aqueous solution and is scalable in its production. Based on these developments, in this paper, a finishing process is presented with which flame retardant textiles can be equipped with bio-based anchor peptides. A requirements’ outline for the new finishing process is described. Established processes (e.g., foulard, coating machine, and roller application) are compared with each other and evaluated with regard to the requirements and their suitability. The most suitable process is then designed, and a laboratory scale as well as an industry scale concept are presented.

8 May 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
RHRahel Heesemann
Rahel Heesemann
SMSudhanshu Maurya
Sudhanshu Maurya
RRRochak Rathour
Rochak Rathour
ADApurba Das
Apurba Das
TGThomas Gries
Thomas Gries
Firefighter protective clothing is composed of multiple layers, each serving distinct functions. The outer layer shields the user from fire, chemicals, cuts, body fluids, and water, while also permitting water vapour to escape. The middle membrane layer acts as a thermal and moisture barrier, preventing heat and liquid penetration but allowing vapour diffusion. The inner layer enhances thermal protection and wearer comfort. A nationwide German survey and risk analysis with different fire brigades identified a need for enhanced comfort, reduced physiological heat load, and improved protection against stabs and cuts. Enhanced tear resistance is one proposed method for increased stab and cut protection. Wearer comfort parameters include water vapour permeability, breathability, air permeability, efficient cooling and increased breathability of the protective clothing are crucial for comfort. Sweat is diffused through the jacket due to differing water vapour partial pressures inside and outside the jacket. Enhancing air permeability of the outer layer and reducing the water vapour transmission resistance across the entire layer structure improve cooling by lowering the external water vapour partial pressure, thus facilitating better sweat transport and heat dissipation. To increase breathability and stab- and cut protection, different fabric weaves for the outer layer of a firefighter´s jacket are produced and compared with each other. The Honeycomb and the Huck-a-back fabric achieve better properties than Twill 2/2 fabric used as standard.

18 October 2024 in Mechanics of Advanced Materials and Structures
Verified
Journal Article
Closed access
SAShiva Aghazadeh
Shiva Aghazadeh
HNHooshang Nosraty
Hooshang Nosraty
AAAzita Asayesh
Azita Asayesh
TGThomas Gries
Thomas Gries
RHRahel Heesemann
Rahel Heesemann

12 July 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
RHRahel Heesemann
Rahel Heesemann
MSMatthias Sanders
Matthias Sanders
RPRoshan Paul
Roshan Paul
IBIsa Bettermann
Isa Bettermann
TGThomas Gries
Thomas Gries
DDDominic Danielsiek
Dominic Danielsiek
Flame retardants are commonly used to reduce fire risk in various products and environments, including textiles. While many of these additives contain harmful substances, efforts are underway to reduce their usage. Current research aims to minimize flame-retardant quantities and enhance durability against external factors. This involves utilizing anchor peptides or material-binding peptides (MBPs), which are versatile molecules that bind strongly to surfaces like textiles. MBPs can be equipped with functional molecules, e.g., flame-retardant additives, by chemical or enzymatic bioconjugation. In this research, biohybrid flame retardants and an adapted finishing process are developed. Specifically, biobased adhesion promoters, the so-called MBPs, are used to finish textiles with flame-retardant additives. To date, there is no finishing process for treating textiles with MBPs and so a laboratory-scale finishing process based on foulard was developed. Necessary parameters, such as the take-off speed or the contact pressure of the squeezing rollers, are determined experimentally. In order to develop an adapted finishing process, various trials are designed and carried out. Part of the trials is the testing and comparison of different textiles (e.g., glass woven fabrics and aramid woven fabrics) under different conditions (e.g., different ratios of MBPs and flame retardants). The finished textiles are then analysed and validated regarding their flammability and the amount of adhered flame retardants.

16 August 2024 in Communications in Development and Assembling of Textile Products
Verified
Journal Article
Open access
PDF file
IBIsa Bettermann
Isa Bettermann
DMDebolina Mukherjee-Kleiber
Debolina Mukherjee-Kleiber
RHRahel Heesemann
Rahel Heesemann
TGThomas Gries
Thomas Gries
The textile field is diverse and encompasses products intended for technical and non-technical applications. The product diversity in the textile domain has led to various product development approaches. This paper describes a product development method for textile products that is generally applicable. In the so-called Textile Development (TED)-Method, the textile surface manufacturing process is determined in the product development process. In this way, it is possible to develop in an open, target-oriented way and independent of an existing supplier or machine park. By using correlation matrices, a broad design field is considered and specific solutions are extrapolated that lead to the desired product without lengthy iteration series. Thus, the TED-Method additionally represents a resource-saving product development without renouncing a broad design field. Three different development examples of the TED-Method are presented, thus demonstrating the open and comprehensive use of the method

1 April 2026
Verified
Book Chapter
Closed access
PDF file
RLRoxana Ley
Roxana Ley
RHRahel Heesemann
Rahel Heesemann
TGThomas Gries
Thomas Gries
DDDurul Büşra Dilden Debreli
Durul Büşra Dilden Debreli