This study aims to achieve a balance of daylight availability in the work-plane environments of a fully glazed facade integrated with a light shelf system using an optimization procedure that can assist architects with assessing the daylighting performance of numerous design alternatives, and build-up the optimized design. The approach uses parametric design, simulation modelling, and genetic algorithms. A case study of a typical office is carried out to test and verify the effectiveness of the optimization procedure for a light shelf system. Five parameters of light shelf design are optimized in two solar solstices (June and December) and one equinox in March under the Malaysian sky conditions. The optimization results indicate that the optimal design options of light-shelf parameters have great potential for illuminance improvement. After the optimization, the daylighting performance of useful daylight illuminance compared to reference models is increased respectively with an average value of 15.6% and 4.7% on the 21st of June, and by 17.5% and 5.8% on 21st of March, and by 5.8% and 11.3% on 21st of December. Statistical analysis is achieved to investigate the relationship between the performance metric of the optimal design options and the other cases, the outcomes showed that the regression analysis indicated a high level of reliability as well as different levels of variation coefficients. Header of solarlits.com
1 January 2012 in Procedia - Social and Behavioral Sciences
Amidst today's energy-economic crisis, the introduction of green spaces in a high-rise building is one way of reducing building's cooling load, which at present relies mainly on air conditioning. This paper evaluates users’ perceptions and expectations in three different landscape gardens on a 21-storey high-rise office building in Penang, Malaysia. The questionnaire focuses on comfort level, landscape preferences as well as expectations and use of space. The low usage factor was attributed to the unawareness of the gardens’ existence, low accessibility and users’ preference of staying indoors. The three gardens are significantly different in its overall comfort level, thermal comfort parameters, attractions and number of visits
Recent advances in artificial intelligence (AI), blockchain, virtual reality (VR), and digital twin technologies are transforming approaches to cultural heritage conservation. This study develops an integrated analytical framework that combines AI-driven modeling, interactive functionality, and blockchain/NFT authentication to examine both the direct and mediating effects of these technologies on heritage conservation effectiveness (HCE). Digital twins serve as a core component for simulating and managing heritage environments through dynamic, data-driven representations. An empirical analysis using Partial Least Squares Structural Equation Modeling (PLS-SEM) was conducted on 575 valid survey responses. The results indicate that blockchain/NFT authentication indirectly enhances heritage conservation effectiveness by improving digital authenticity. The study theoretically pioneers the integration of multiple digital technologies into a unified framework and empirically demonstrates the mediating roles of user immersive experience and digital authenticity. Practically, the findings offer actionable insights for advancing digital heritage conservation within metaverse environments and intelligent cultural ecosystems.
Recent increases in the awareness of sustainable green design have resulted in the creation of transitional spaces in high-rise buildings. Incorporating green design in high-rise buildings has been associated with the reduction of energy consumption in buildings and the provision of open spaces for occupants. Achieving thermal comfort in the outdoor environment is crucial, particularly in tropical climate settings where it is highly affected by microclimatic conditions such as the air temperature, wind, humidity and solar radiation. This paper examines the air temperature at three different transitional spaces of a high-rise office building in Penang, Malaysia. The field measurements were conducted in both dry and wet seasons, and the trend in the air temperature was assessed during these two seasons. Air temperature was measured using a temperature sensor and recorded with a data logger, BABUC-A. The findings indicated that there are significant differences among the three transitional spaces in both seasons. It was found that the different locations and the different seasons had substantial effects on the pattern of air temperature over time. Thus, designing transitional spaces specifically requires an understanding of the local microclimate of the area to achieve thermal comfort.
8 February 2023 in Journal of Advanced Research in Applied Sciences and Engineering Technology
Digital construction has paved its way into the Architecture, Engineering and Construction (AEC) industries with the technological revolution, which significantly change the design, construction, and management processes. The use of Building Information Modelling (BIM) presents a valued collaborative technology that eliminates most communication related challenges of the industry. The Chinese government has emerged as a major force promoting BIM adoption, by implementing policies and promoting efforts with government support. Yet, the adoption rate is still unsatisfactory particularly for China cost engineering industry. This paper examines the drivers and barriers of BIM adoption and consequently review its impact on the current BIM implementation processes. This study also investigated their awareness and acceptance level of BIM adoption. The main respondents are the cost engineering practitioner specifically in the area of Guangxi. The UTAUT and TAM model are adopted, to analyse on individual intention and behaviour by distributing online questionnaires. This analysis reveals that the practitioners have poor awareness of BIM and have no willingness to learn new BIM knowledge independently. At present, the proportion of BIM actual use in projects is relatively low, and no single post-construction maintenance project applied BIM technology. The main influencing factors for BIM adoption are measured based on the Performance Expectation, Effort Expectation, Generation Gap, Social Influence, Managerial Attitude and Facilitating Conditions. This paper contributes to the strategic suggestions that puts forward the role of user, consultants, governments that may facilitate the advantages of BIM technology adoption. This paper identified that successful implementation include the role of consultants on their readiness and acceptance, followed by adequate technology education and training.