Green hydrogen produced by water splitting using renewable energy is the most promising energy carrier of the low-carbon economy. However, the geographic mismatch between renewables distribution and freshwater availability poses a significant challenge to its production. Here, we demonstrate a method of direct hydrogen production from the air, namely, in situ capture of freshwater from the atmosphere using hygroscopic electrolyte and electrolysis powered by solar or wind with a current density up to 574 mA cm⁻². A prototype of such has been established and operated for 12 consecutive days with a stable performance at a Faradaic efficiency around 95%. This so-called direct air electrolysis (DAE) module can work under a bone-dry environment with a relative humidity of 4%, overcoming water supply issues and producing green hydrogen sustainably with minimal impact to the environment. The DAE modules can be easily scaled to provide hydrogen to remote, (semi-) arid, and scattered areas.

In the past two decades, various microporous materials have been developed as useful adsorbents for gas adsorption for a wide range of industries. Considerable efforts have been made to regulate the pore accessibility in microporous materials for the manipulation of guest molecules’ admission and release. It has long been known that some microporous adsorbents suddenly become highly accessible to guest molecules at specific conditions, e.g., above a threshold pressure or temperature. This anomalous adsorption behavior results from a gating effect, where a structural variation of the adsorbent leads to an abrupt change in the gas admission. This review summarizes the mechanisms of the gating effect, which can be a result of the deformation of the framework (e.g., expansion, contraction, reorientation, and sliding of the unit cells), the vibration of the pore-keeping groups (e.g., rotation, swing, and collapse of organic linkers), and the oscillation of the pore-keeping ions (e.g. cesium, potassium, etc.). These structural variations are induced either by the host–guest interaction or by an external stimulus, such as temperature or light, and account for the gating effect at a threshold value of the stimulus. Emphasis is given to the temperature-regulated gating effect, where the critical admission temperature is dictated by the combined effect of the gate opening and thermodynamic factors and plays a key role in regulating guest admission. Molecular simulations can improve our understanding of the gate opening/closing transitions at the atomic scale and enable the construction of quantitative models to describe the gated adsorption behaviour at the macroscale level. The gating effect in porous materials has been widely applied in highly selective gas separation and offers great potential for gas storage and sensing.