Lingkai Zhang

Dr. Lingkai Zhang

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2024 in Granular Matter
Verified
Journal Article
Closed access
PDF file
RZRunhan Zhang
Runhan Zhang
LZLingkai Zhang
Lingkai Zhang
CSChong Shi
Chong Shi
YZYonggang Zhang
Yonggang Zhang
YCYunchao Cui
Yunchao Cui

29 October 2024 in Computational Particle Mechanics
Verified
Journal Article
Open access
PDF file
RZRunhan Zhang
Runhan Zhang
LZLingkai Zhang
Lingkai Zhang
CSChong Shi
Chong Shi
YCYunchao Cui
Yunchao Cui
XZXiaoying Zhang
Xiaoying Zhang
Considering the critical role of boundary conditions in influencing the mechanical properties and deformation behaviors of rockfill materials, large-scale triaxial numerical simulation experiments are conducted under various boundary conditions using discrete element and finite-difference coupling (FDM-DEM) technology. This study aims to examine the effects of boundary conditions on the mechanical behavior of rockfill materials and to clarify the discrepancies in their deformation and failure mechanisms at both macroscopic and microscopic scales. The results indicate that the FDM-DEM coupling boundary provides distinct advantages in characterizing the mechanical response of rockfill materials. Under the rigid boundary, both peak strength and volumetric deformation capacity are significantly enhanced. The stress–strain curves observed with the bonded particles boundary consistently show a hardening trend and exhibit a relatively limited capacity for volume change. The “x”-shaped shear band and waist-drum failure mode of rockfill materials are more accurately depicted using the FDM-DEM coupling boundary. In contrast, the rigid boundary samples display collapse failure, an unconventional “k”-shaped shear zone, pronounced stress concentration, and the appearance of stress blind zones, along with a marked reduction in the mechanical coordination number. The bonded particles boundary demonstrates greater potential in capturing the final morphology of the shear band, with the conical dead zone showing increased freedom in its evolution, more uniform stress distribution, and a gradual decline in the mechanical coordination number. The FDM-DEM coupling boundary proves advantageous in maintaining stable confining pressure and effectively simulating continuous elastic deformation, while significant additional stresses are observed at both the rigid boundary and the bonded particles boundary.

28 January 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
HCHui Cheng
Hui Cheng
LZLingkai Zhang
Lingkai Zhang
CSChong Shi
Chong Shi
PFPei Pei Fan
Pei Pei Fan
Water conveyance channels in cold and arid regions pass through several saline-alkali soil areas. Canal water leakage exacerbates the salt expansion traits of such soil, damaging canal slope lining structures. To investigate the mechanical properties of saline clay, this study conducted indoor tests, including direct shear, compression, and permeation tests, and scanning electron microscopy (SEM) analysis of soil samples from typical sites. This study aims to elucidate the impact of various factors on the mechanical properties of saline clay from a macro–micro perspective and reveal its physical mechanisms. A prediction model is formulated and validated. The findings indicate the following: (1) Cohesion in direct shear tests has a linear negative correlation with water content and a positive correlation with dry density and initially decreases with increasing salt content until 2%, after which it increases. The internal friction angle initially increases and then decreases with increasing water content, reaching a peak at the optimal water content, and then gradually increases with dry density while initially decreasing, followed by an increase in salt content, stabilizing thereafter. Water content, dry density, or salt content chiefly affect cohesion by influencing electrostatic attraction, van der Waals forces, particle cementation, and valence bonds at particle contact points. (2) Compression tests reveal a linear positive correlation between the compression coefficient and water content, a negative correlation with dry density, and a stepwise linear correlation with salt content, peaking at 2%. The compression index decreases with increasing water content and dry density, following a trend similar to that of the compression coefficient with increasing salt content. The rebound index shows a linear negative correlation with water content and dry density, transitioning from a negative to a positive correlation at 2% salt content. Scanning electron microscopy analysis revealed particle flattening and increased aggregation with increasing consolidation pressure, reducing compressibility. Large pores and three-dimensional porosity have the greatest influence on soil compressibility. (3) Permeability tests reveal an exponential negative correlation between the permeability coefficient and dry density. As the dry density increases, the particle arrangement becomes denser, decreasing the pore quantity, with micropores disproportionately impacting the permeability coefficient. An increase in salinity initially increases the permeability coefficient before it decreases. The boundary point of the 2% salt content divides the effect of salt ions from promoting free water flow to blocking seepage channels, with the proportion of micropores being the primary influencing factor. (4) Employing statistical theory and machine learning algorithms, dry density, water content, and salinity are used to predict mechanical index values. The improved particle swarm optimization-support vector regression (PSO-SVR) model has high accuracy and general applicability. These findings offer insights for the construction and upkeep of open channel projects in arid regions.

24 May 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HXHaozhen Xu
Haozhen Xu
LZLingkai Zhang
Lingkai Zhang
CSChong Shi
Chong Shi
The combination of seasonal shutdowns, water conveyance, cold, and drought can easily lead to the deterioration of the anti-seepage system and loess foundation of the canal, which contributes to the destruction of the slope. To reveal the failure mechanism of the collapsible loess canal slope, this paper is based on the results of laboratory tests and adopts numerical simulations to analyze the stability of the canal slope under different conditions. The results show that the shear strength indexes and elastic modulus E of loess decrease following an exponential pattern with the increase in wetting-drying and freezing-thawing (WD-FT) cycles. The height of the seepage overflow point yields little effect on the water level behind the impermeable membrane, whereas the height of the water level has a significant effect. In the operation period, the slope under any working conditions is in a relatively stable state. However, the slope with a water level of 4.5 m behind the impermeable membrane tends to be unstable after three WD-FT cycles during the shutdown period. By replacing the surface-degraded loess with sand gravel and picking a depth of 0.9–1.2 m, the slope will maintain a long-term stable state.

25 June 2024 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
HWHaotian Wang
Haotian Wang
LZLingkai Zhang
Lingkai Zhang
CSChong Shi
Chong Shi
LZLingfeng Zhao
Lingfeng Zhao
YZYonggang Zhang
Yonggang Zhang
Sliding damage of canal slopes due to the degradation of shear and compression properties of expansive soils caused by long-term dry-wet-freeze-thaw cycles is frequently encountered in canal projects in cold and arid regions. To address this issue, this paper developed a new reinforcing technique for expansive soil canal slopes with monolithic structural anti-slide piles. The sliding damage mechanism of the canal and the reinforcement schemes were analyzed based on the numerical simulations with the FLAC 3D software. The results showed that force redistribution of double-row piles occurred under the longitudinal connection. The maximum reduction in pile displacement was 20.66% under the X-type connection, and the distribution of internal force of pile body changed. The pile forces were redistributed again under the full connection mode, and the pile displacement increased by 4.38%, 95.14%, and 82.09% under the transverse and longitudinal connection mode, the front and rear full connection mode, and the frame full connection mode, respectively. The stability of the canal slope returned to a steady state (FS > 1.30) in the full connection mode. The findings in this paper can provide guidance for practical engineering.

4 September 2024 in Natural Hazards
Verified
Journal Article
Closed access
PDF file
PFPeipei Fan
Peipei Fan
LZLingkai Zhang
Lingkai Zhang
CSChong Shi
Chong Shi
YZYonggang Zhang
Yonggang Zhang
XDXusheng Ding
Xusheng Ding
HCHui Cheng
Hui Cheng