In this work a seismic analysis of structure associated with the complete description of ground motion components is performed. All earthquake excitation components corresponding to the six degrees of freedom, translational and rotational ones need to be taken into account for a realistic simulation of structural performance. The impact of the rotational components of an earthquake to the overall response of a steel structure is examined. Typically, in response to the history analyses, the seismic input is descripted by its translational component only, while the rotational components are ignored. This is because the rotational component requires special devices to be recorded in adequate detail. This is one of the reasons why this component is often ignored. With the currently available technology, such an instrument can be constructed and provide detailed records that can be used for the response history analysis of structures. The applicable design codes using a simplified response spectrum analysis accounting for rotational components is proposed and elastic design response spectra are introduced. Another reason why the rotational component was not taken into account in structural analysis is that it does not have significant effect on low-rise buildings. In this work, the analysis results in terms of response and internal forces when accounting for the rotational component is demonstrated. A case study on the response history analysis of symmetrical and non-symmetrical steel structures subjected to earthquake excitation with and without the rotational component of the excitation was performed. Numerical results show that the influence of the rotational component on the structural behaviour is important and should be taken into account in the design process.
1 September 2017 in Soil Dynamics and Earthquake Engineering
Reinforced concrete retaining walls are concrete structures that are built to retain natural soil or fill earth. This study examines the lower cost-optimized design of retaining walls. Recently, a large number of modern optimization techniques were published, but a small number of them were proposed for reinforced concrete retaining walls. The proposed method develops a heuristic optimization approach to achieve the optimal design of these structures. This method simultaneously satisfies all structural, geotechnical, and European Code design restraints while decreasing the total cost of these structures. In order to confirm the efficiency and accuracy of the proposed method, characteristic retaining wall examples are demonstrated. Furthermore, the parametric investigation is examined to study the result of pertinent parameters on the minimum-cost static and seismic design of retaining structures.
In this work, a systematic study is conducted on the behavior of three-dimensional offshore oil/natural gas platforms under the action of seismic sequences. Such repeated earthquakes result in a noteworthy accumulation of damage in a platform since, in many cases, any rehabilitation process between any two or more successive ground motions cannot be essentially materialized because of lack of time. Conversely, in the past, the seismic response of offshore platforms has been exclusively investigated for the case of single earthquakes. In this study, two three-dimensional platforms are examined, where the first one is assumed to be completely constrained at its base (fixed boundary conditions), while the second one is founded in deformable soil with the aid of long piles. These structures are subjected to real seismic sequences which have been recorded by the same station in a short period of time. Additionally, the platforms under consideration are also subjected to artificial seismic sequences. In this study, we found that sequential earthquakes have a significant effect on the response of these special structures, and this finding should be taken into account in their design.
As health and safety in construction is a major concern worldwide, this paper examines the occupational health and safety (OHS) disclosures of leading companies. A composite disclosure index was devised, based on the Global Reporting Initiative (GRI) Standards for Corporate Social Responsibility (CSR) Reporting, and focuses on the information found in such reports of corporations pertaining to the United Kingdom (UK) construction industry, in an attempt to identify trends in OHS reporting from a sample of fifteen corporations. The results disclose that construction companies fall short in reporting OHS objectives. The prevention and mitigation measures of OHS impacts and occupational health services are the only indicators in which companies reach medium to good performance. In contrast, issues of young workers exposed to hazards pertaining to suppliers are not reported by the sample. Five sample firms were identified as not revealing any information on OHS, while there was no disclosure by at least nine companies.