ARAVINTHAN ARUMUGAM

Dr. ARAVINTHAN ARUMUGAM

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
AAARAVINTHAN ARUMUGAM
ARAVINTHAN ARUMUGAM
Alokesh PramanikAlokesh Pramanik
Alokesh Pramanik
Traditional resistance spot welding (RSW) has been unsuccessful in forming quality composite joints between steel– or aluminum–polymer-based composites. This has led to the development of spot welding variants such as friction stir spot welding (FFSW), ultrasonic spot welding (USW), and laser spot welding (LSW). The paper reviewed the differences in the bonding mechanisms, spot weld characteristics, and challenges involved in using these spot welding variants. Variants of RSW use series electrode arrangement, co-axial electrodes, metallic inserts, interlayers, or external energy to produce composite joints. FFSW and USW use nanoparticles, interlayers, or energy directors to create composite spot welds. Mechanical interlocking is the common composite joint mechanism for all variants. Each spot welding variant has different sets of weld parameters and distinct spot weld morphologies. FFSW is the most expensive variant but is commonly used for composite spot weld joints. USW has a shorter welding cycle compared to RSW and FFSW but can only be used for small components. LSW is faster than the other variants, but limited work was found on its use in composite spot weld joining. The use of interlayers in FFSW and USW to form composite joints is a potential research area recommended in this review.

10 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
AAARAVINTHAN ARUMUGAM
ARAVINTHAN ARUMUGAM
A BasakA Basak
A Basak
Alokesh PramanikAlokesh Pramanik
Alokesh Pramanik
GLGuy Littlefair
Guy Littlefair
The incorporation of multi-material design (MMD) to achieve lightweight vehicles requires Friction Stir Spot Welding (FSSW) to join steel with aluminum, magnesium, or composites. This study investigates the mechanisms, challenges, and performance of FSSW in MMD based on the information available in the literature. It also explores the effect of FSSW tool geometries and design on the spot weld formation and mechanical strength. Larger shoulder and pin diameters increase heat generation during welding. A concave shoulder profile produces a stronger weld compared to flat and convex profiles due to its ability to trap materials and transfer materials to the sheet interface efficiently for the development of a sound weld. Grooves such as Fibonacci and involute, and threads on P-FSSW and R-FSSW tools, also contribute to effective material flow during welding, hence assisting in heat generation. This review also provides recommendations on tool design for FSSW, P-FSSW, and R-FSSW.

13 February 2020 in Australian Journal of Mechanical Engineering
Verified
Journal Article
Closed access
AAARAVINTHAN ARUMUGAM
ARAVINTHAN ARUMUGAM
APAlokesh Pramanik
Alokesh Pramanik
Spot weld pull-out failures (PFs) on mild steel and stainless steel joints were investigated under different loading conditions using lap-shear test, cross-tension (KSII) test and coach-peel test. Regardless of the joint type, joints tested with lap-shear test showed the highest weld strength followed by KSII and coach-peel tests, respectively, for the same welding current. Analyses with experimental samples and finite element analysis showed that PFs due to different loading conditions were governed by either tensile stress, shear stress or bending stress. The tendency to fail via weld PF increased from welds tested with KSII test, coach-peel test and lap-shear test for similar steel joints within a range of welding currents. This study also showed that the weld diameters for PF depend on the joint type as well as loading conditions and did not conform to the recommended weld diameters by the automotive standards.

Mohammad SohelMohammad Sohel
Mohammad Sohel
VSVishal Sharma
Vishal Sharma
AAARAVINTHAN ARUMUGAM
ARAVINTHAN ARUMUGAM
This study presents a systematic optimization of GTAW welding parameters to achieve a pipe-to-pipe butt weld with a root height consistently below 2 mm when joining stainless-steel 316L material, employing the Taguchi design of experiments. To the authors’ knowledge, no similar studies have been conducted to explore the optimization of welding parameters specifically aimed at minimizing weld root height under 2 mm in stainless-steel EO pipeline welding applications. This gap in the existing literature highlights the innovative aspect of the current study, which seeks to address these challenges and improve welding precision and joint reliability. Root height, also referred to as weld root reinforcement, is defined as the excess weld metal protruding beyond the inner surface root side of a butt-welded joint. The input parameters considered are the welding current, voltage, speed, and root gap configurations of 1, 1.5, and 2 mm. Welding was performed according to the Taguchi L-09 experimental design. Nine weld samples were evaluated using liquid penetrant testing to detect surface-breaking defects, such as porosity, laps, and cracks; X-ray radiography to identify internal defects; and profile radiography to assess erosion, corrosion, and root height. Among the nine welded plate samples, the optimal root height (less than 2 mm) was selected and further validated through the welding of a one-pipe sample. An additional macro examination was conducted to confirm the root height and assess the overall root weld integrity and quality.

1 April 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
AAARAVINTHAN ARUMUGAM
ARAVINTHAN ARUMUGAM
Alokesh PramanikAlokesh Pramanik
Alokesh Pramanik
Traditional resistance spot welding (RSW) was unsuccessful in forming quality composite joints between steel or aluminium-polymer based composites. This led to the development of spot-welding variants such as friction stir spot welding (FFSW), ultrasonic spot welding (USW) and laser spot welding (LSW). The paper reviewed the differences in the bonding mechanism, spot weld characteristics and challenges involved in using these spot-welding variants. Variants of RSW used series electrodes arrangement, co-axial electrodes, metallic inserts, interlayers or external energy to produce composite joints. FFSW and USW used nanoparticles, interlayers or energy directors to create composite spot welds. Mechanical interlocking is the common composite joint mechanism in all variants. Each spot-welding variant had different sets of weld parameters and distinct spot weld morphologies. FFSW is the most expensive variant but commonly used for composite spot weld joints. USW has a shorter welding cycle compared to RSW and FFSW but can only be used for small components. LSW is faster than the other variants, but limited work was found on its use in composite spot weld joining. Use of interlayers in FFSW and USW to form composite joints are potential research areas recommended in this review.

19 August 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Ana EvangelistaAna Evangelista
Ana Evangelista
AAARAVINTHAN ARUMUGAM
ARAVINTHAN ARUMUGAM
Mistreselasie Sentayehu AbateMistreselasie Sentayehu Abate
Mistreselasie Sentayehu Abate
Non-destructive tests give information about a structure's concrete properties. Still, the reliability of evaluating those properties depends on the experience of the profes-sional who carries out the tests and the curves employed to correlate the measured values with the properties of the investigated concrete. The Non-destructive Test methods (NDT) have been used to evaluate concrete strength in many countries, and experimental studies have investigated which method is more reliable and practical. The concrete properties are estimated/ predicted using correlation curves that combine non-destructive test measurements with the compressive strength of concrete established through a laboratory testing program. Typically, the parameters that influence these curves are the water-to-cement ratio, the type of aggregate, the maximum aggregate size, and the type of cement used in the concrete. This paper presents a study on the influence of different parameters on ultrasonic pulse velocity results and rebound hammer methods. It was found that applying multiple regression to data from two types of non-destructive tests provides a more accurate estimate of compressive strength.