A honeycomb structure is a sandwich structure widely used in fuselage, among which the hexagonal honeycomb core is the most widely used. The energy absorption characteristics and impedance ability of the structure are the main reasons that directly affect the energy absorption characteristics of the honeycomb sandwich structure. Therefore, it is necessary to study the out-of-plane mechanical properties of the composite honeycomb sandwich structure. Based on the numerical simulation results, the energy absorption characteristics of several composite honeycomb sandwich structures are verified by drop hammer impact experiments. The research shows that the transient energy absorption characteristics of the composite honeycomb sandwich structure are mainly related to the cell size of the honeycomb structure. The smaller the size of the front cell, the stronger the overall impact resistance; the strength of the composite honeycomb sandwich structure exceeds that of 7075 aluminum alloy-NOMEX and carbon fiber-NOMEX honeycomb sandwich structures. In this paper, the energy absorption characteristics of composite honeycomb sandwich structures under different impact energy are compared and studied. The displacement, force and energy curves of energy absorption characteristics related to time variables are analyzed. The difference in protective performance between the composite honeycomb sandwich structure and existing airframe structure is compared and studied. The optimal structural design parameters of composite honeycomb sandwich under low-speed impact of drop hammer are obtained. The maximum energy absorption per unit volume of the designed honeycomb sandwich structure is 171.7% and 229.8% higher than that of the NOMEX-AL and NOMEX-C structures. The 6.4 mm and 3 mm cell sizes show good characteristics in high-speed buffering and crashworthiness. The composite honeycomb sandwich airframe structure can improve the anti-damage performance of the UAV airframe structure, ensure the same thickness and lightweight conditions as the existing honeycomb sandwich airframe structure, and improve the single-core bearing mode of the existing airframe structure.
With the continuous innovation of UAV technology, composite honeycomb sandwich structures are used more and more in the fuselage structure of UAVs, and their anti-high-speed fragment impact performance has become a concern. In order to study the influence of fragments on the damage degree of composite honeycomb structures and analyze the damage difference of different initial velocity fragments on different composite honeycomb structures, based on the numerical simulation results of high-speed impact, the energy absorption characteristics of different honeycomb sandwich structures are analyzed, and the honeycomb structure with better energy absorption is selected for 24 impact experiments. The velocity range of fragment impact is 141–368 m/s. The typical damage of the upper core layer and the lower core layer in each structure is analyzed, and the energy absorption theory is used to compare the conditions of each group. The results show that ST-3-3 has the best energy absorption characteristics. Under different velocity impacts, the energy absorption per unit volume of the ST-3-3 structure reaches 521.6~659.6 × 103 J/m3, which is about 30.6% higher than that of the same design structure. The four groups of composite honeycomb sandwich structures designed in the experiment have obvious deformation in the process of impact, except that the deformation of the bottom skin of the ST-6-6-1 structure is not obvious, and the deformation of the other three groups is more obvious with the increase in structural resistance. This research shows that the reasonable arrangement of the structure and material of the composite honeycomb sandwich can better cope with the impact of high-speed fragments and reduce the damage to the structure.
At present, the typical targets in the air are mainly high-speed impact bodies such as fragments, which pose a great threat to aviation equipment such as drones. It is urgent to study the impact resistance of different initial conditions of fragments to honeycomb sandwich structures. The fragment impact experiment analyzes the fragment flight attitude, fragment power, failure mode, and impact resistance of the structure by changing the different impact velocities on the target plate. In order to study the damage mode and anti-damage performance of several composite honeycomb sandwich structures under oblique penetration impact mode, a total of six groups of composite honeycomb structures were tested by fragment impact sandwich structure at different angles, and the damage law of composite honeycomb sandwich structure in the experiment was compared and analyzed. According to the experimental results, the accuracy of the theoretical model and numerical simulation was verified by fragment impact composite honeycomb sandwich structure. The analysis results show that the failure mode of the composite honeycomb sandwich structure under oblique impact is quite different from that of the traditional structure, which is mainly reflected in the material accumulation type of the failure part. Compared with the traditional structure, the composite honeycomb sandwich structure exhibits better energy absorption efficiency, which is increased by 130% and 600%, respectively. This paper shows the different failure modes of honeycomb sandwich structure under oblique impact and positive impact. The existence of an inclined angle changes the failure mode, increases the damage range, and increases the total energy absorption. It is necessary to further study the failure mechanism of fragment flight angle on honeycomb sandwich structure and provide a reference for the impact resistance design of the structure.