Vortex generators are used in aircraft wings and wind turbine blades. These devices allow them to maintain a stable turbulent behavior in the wind wake. Vortex generators, or VGs, improve the transition from laminar to turbulent boundary layer regime, avoiding abrupt shedding. HAWT wind turbines have high rotational velocity. Currently, HAWT turbines are being redesigned with fixed vortex generators, achieving higher energy production. This paper presents a wind tunnel analysis of a fixed-wire blade with S822 airfoil and active VGs bio-inspired by the flight-stabilizing feathers of the peregrine falcon. Vibrations measured on the blade show a reduction in intensity at wind velocities close to 15 m/s. The measured wake velocities show fluctuations at higher tunnel wind velocities. An FFT spectral analysis of the wind wake velocities showed differences between the spectral components. When activating the VGs in oscillation at a constant frequency, a reduction of the vibrations on the blade was observed for wind velocities around 20 m/s.

Vortex generators are devices that modify the wind behavior near the surface of wind turbine blades. Their use allows the boundary layer shedding transition zone to be varied. Bio-inspired design has been used to improve the efficiency of aerodynamic and hydrodynamic systems by creating devices that use shapes present in animals and plants. In this work, an experimental methodology is proposed to study the effect of bio-inspired vortex generators and their effect on the structural vibration of a blade. In addition, the wind wake generated by the blade with oscillating vortex generators at different oscillation frequencies is analyzed by means of a hot wire anemometer, obtaining appreciable vibration reduction results in the measured 3D acceleration signals for wind velocities between 10 and 15 m/s. Values of the spectral components of the wake velocity measured at higher tunnel wind velocities increase. Spectral variance is reduced at higher tunnel wind velocities. The system analyzed in this paper can contribute in the future to the construction of actuators for vibration compensation systems in wind turbines.

This study presents a comparative analysis of horizontal-axis wind turbines (HAWTs) equipped with and without bio-inspired active oscillating vortex generators (VGs). The experimental investigation examines key aspects of mechanical integration and the resulting variations in aerodynamic behavior, demonstrating measurable improvements in electrical power output. The VGs were designed and implemented using servomechanisms and embedded control systems to enable oscillatory motion during operation. Experimental findings were validated against CFD simulations, indicating that the use of VGs increases annual energy production efficiency by 16.7%, primarily due to the stabilization of wake turbulence. While a reduction in output voltage was observed at wind speeds below 5 m/s, the VGs exhibited enhanced performance under variable wind conditions. These results highlight the potential of combining biomimetic design principles with electronically actuated flow-control devices to advance HAWT technology, improving energy efficiency and contributing to operational sustainability.