Atalay alemayehu Moges

Mr. Atalay alemayehu Moges


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2023 in Advances in Mechanical and Materials Engineering
Verified
Journal Article
Open access
PDF file
AMAtalay alemayehu Moges
Atalay alemayehu Moges
EBEaba Beyene
Eaba Beyene
TGTemesgen Batu Gemechu
Temesgen Batu Gemechu
DTDagim Tirfe
Dagim Tirfe
Metals are the best engineering materials owing to their superior conductivity, mechanical properties, and formability. However, they can be highly affected by environmental elements like oxygen, chlorine, etc. This reaction of metals with the environmental elements will indeed alter their electrical, chemical, and mechanical properties. To protect against corrosion, various protection methods such as electroplating have been established. The presence of anodic or cathodic films on the substrate surface protects steel from corrosion damage at ambient atmospheric temperature. This work focuses on the effect of temperature on the oxidative (corrosion) rate of non-plated, nickel-plated, and chrome-plated ASTM A283GC mild steel samples. A temperature range of 200–800 °C and a total heating time of 120 min were considered in this experiment. A temperature-regulated muffle furnace with a maximum heating capacity of 1000 °C has been used. Weight changes were determined every 30 minutes of heating using a digital weight balance with a precision of 0.001 g. The obtained experimental results of non-plated, nickel-plated, and chrome-plated mild steel samples were analyzed and compared with each other. The effect of oxidation on the surface hardness has also been studied with the help of a Vickers hardness testing machine. Changes in the physical nature of the samples caused by oxidation were also observed and pictured using a camera.

1 January 2024 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
AMAtalay alemayehu Moges
Atalay alemayehu Moges
MBMezigebu Belay
Mezigebu Belay
In today’s world, plastics are vital as they are used in a wide range of applications although packaging is the most prevalent. Most of the plastics that are used for packaging applications are derived from petrochemicals. These plastics meet most of the requirements for good packing applications. However, they are not completely biodegradable. This consequently pollutes the environment. As a result, biodegradable plastics have emerged as an alternative to conventional plastics. Cellulose is one of the potential materials that are used for making biodegradable plastics. However, making plastic from cellulose causes deforestation. In this work, plastic was produced from cellulose bagasse, which is an industrial waste. Since bagasse is an industrial by‐product, it causes neither deforestation nor scarcity of food. However, the plastic made from bagasse showed high water absorption and low tensile strength. To overcome this problem, the plastic, which is made from bagasse, was reinforced with various concentrations of graphene oxide (GO) and crosslinked with various concentrations of citric acid (CA) at different crosslinking temperatures and crosslinking times. The water absorption and biodegradability of the films were studied. Furthermore, the synergistic effect of crosslinking and reinforcement was used to improve the interfacial bonding between the two. The water absorption of pure cellulose, cellulose crosslinked with 10% CA, cellulose reinforced with 15% GO reinforcement, and synergy of 10% CA crosslinking and 15% GO reinforcement at crosslinking temperature of 130°C and crosslinking time of 25 min was found to be 99.02%, 56.4%, 44.275%, and 36.78%, respectively. The biodegradability at the optimal values of crosslinker concentration, crosslinking time, and crosslinking temperature of pure cellulose of bagasse, 10% CA crosslinked bagasse, and 10% CA crosslinked bagasse with 15% GO reinforcement in 30 days were found to be 94.0397%, 56.91%, and 40.81%, respectively. The result of the study shows that water‐resistant biodegradable plastic can be produced with the synergistic effect of crosslinking and reinforcement.